911±¬ÁÏ

Department of Industrial Engineering and Management

Avatar

Dr. Mst. Nazma Sultana

Associate Professor

[email protected]
Research Interest: Manufaturing

Print Profile

Bio

Dr. Mst. Nazma Sultana is a distinguished academic and researcher specializing in Manufacturing, Optimization, 3D Printing, and Simulation. She earned her B.Sc. in Industrial & Production Engineering and M.Sc. in Industrial Engineering and Management from Khulna University of Engineering & Technology (KUET), 911±¬ÁÏ, and completed her Ph.D. in Industrial & Production Engineering from 911±¬ÁÏ University of Engineering & Technology. Currently an Associate Professor in KUET’s Department of Industrial Engineering and Management, Dr. Sultana is deeply involved in teaching and advancing research in modern manufacturing.

Her work focuses on 3D printing innovations, process optimization for cost and efficiency, and simulation modeling to enhance manufacturing workflows. By leveraging advanced mathematical tools and predictive methods, she addresses critical industry challenges, such as toolpath optimization, productivity improvement, and machining efficiency. Dr. Sultana’s research aims to develop effective strategies that drive sustainability and efficiency in manufacturing systems.

Publication

Journal
16.
15. Sultana,N. ,Quader,M. R. and Rahman,M. J. a. M. H. ,2016 , "SolidCAM iMachining (2D): A Simulation Study of a Spur Gear Machining and G-code Generation for CNC Machine", International Journal of Mechanical Engineering and Automation, , Ethan Publishing, vol. 3(1)
14. Sultana,M. N. and Amin,M. R. a. M. A. ,2017 , "Experimental and Analytical Investigation of the Effect of Additives on Green Sand Mold Properties Using Taguchi Method", International Journal of Mechanical Engineering and Automation, , Ethan Publishing, vol. 4(4)
13.
12.
11.
10. Sultana,M. N. ,Zaman,P. B. and Dhar,N. R. ,2020 , "GRA-PCA coupled with Taguchi for optimization of inputs in turning under cryogenic cooling for AISI 4140 steel", Journal of Production Systems and Manufacturing Science, , vol. 1(2)
9. Zaman,P. B. ,Sultana,N. and Dhar,N. R. ,2020 , "Quantifying the effects of cooling condition, tool type and cutting parameters on machinability of turning AISI 4140 steel using full factorial DOE", Journal of Production Systems and Manufacturing Science, , vol. 1(2)
8.
7.
6.
5. Sultana,M. N. and Dhar,N. R. ,2023 , "RSM design-based hybrid approach to multi-response optimization in milling Ti-6Al-4 V alloy: A comparative study", Materials Today:Proceedings, , Elsevier, DOI:https://doi.org/10.1016/j.matpr.2023.03.527
4. Sultana,M. N. and Dhar,N. R. ,2023 , "Milling force modelling with high-pressure cooling strategy: An integrated analytical approach", Materials Today:Proceedings, , Elsevier, DOI:https://doi.org/10.1016/j.matpr.2023.04.693
3.
2. Sultana,M. N. and Dhar,N. R. ,2023 , "Performance evaluation of high-pressure cooling by using external rotary liquid applicator in milling Ti–6Al–4V alloy", Heliyon, , Elsevier, vol. 9(7), DOI:https://doi.org/10.1016/j.heliyon.2023.e17671
1. Sultana,M. N. and Dhar,N. R. ,2023 , "Comparative evaluation and sensitivity analysis of multi-modelling and optimization of milling Ti–6Al–4V alloy with high-pressure coolant jets", Heliyon, , Elsevier, vol. 9(8), DOI:https://doi.org/10.1016/j.heliyon.2023.e18582
Conference
6. Sultana,M. N. ,Zaman,P. B. and Dhar,N. R. , 2020 , "Process Parameter optimization of Cryogenic Turning of Ni-Cr Steel using Taguchi Grey Relational Analysis," 6th International Conference on Mechanical, Industrial and Energy Engineering 2020 19-21 December, 2020, Khulna, BANGLADESH,
5. Sultana,M. N. ,Zaman,P. B. and Dhar,N. , 2020 , "Effects of Nano-fluids Assisted MQL in Machining Processes: A Review," 6th International Conference on Mechanical, Industrial and Energy Engineering 2020 19-21 December, 2020, Khulna, BANGLADESH,
4. Kibria,.. , Sultana,M. N. , Talapatra,S. and Sultana,S. , 01-02 February,2013 , "Safety Load Analysis by NIOSH Lifting Equation and Hazard Analysis for an Automobile Assembly Lineâ€, 2nd Int. Conf. on Mechanical, Industrial and Energy Engineering," 2nd Int. Conf. on Mechanical, Industrial and Energy Engineering,
3. Kibria,M. , Sultana,M. N. , Ahsan,A. N. and Sultana,S. , 01-02 February,2013 , "Application of Ergonomic Principles in Automobile Assembly Lineâ€, 2nd Int. Conf. on Mechanical, Industrial and Energy Engineering," 2nd Int. Conf. on Mechanical, Industrial and Energy Engineering(ICMIEE),
2. Sultana,M. ,Hasan,M. and Islam,M. , 25-26 December, 2014 , "Analysis of Mechanical Properties of malleable iron Applying Various Heat treatmentâ€," 3rd Int. Conf. on Mechanical, Industrial and Energy Engineering(ICMIEE),
1. sultana,M. N. , Rahman,S. A. , Rahman,M. and Dey,U. k. , 25-26 December, 2014 , "Comparative analysis of AHP and Fuzzy AHP in supplier selection: a case study on cement industry," 3rd Int. Conf. on Mechanical, Industrial and Energy Engineering(ICMIEE),

Education

BUET,911±¬ÁÏ (2018-2023) Achievement: Best Paper Award

M.Sc in Industrial Engineering and Management

Bachelor of Science in Industrial & Production Engineering
Khulna University of Engineering & Technology,911±¬ÁÏ (2012) Group: IEM, Merit Position: First, Achievement: Gold Medalist

HSC
Cantonment Public School & College, Khulna,911±¬ÁÏ (2007) Group: Science, Merit Position: 19, Achievement: Got Talent pool Scholarship for merit position 19 in Jessore Board

SSC
Atra Sreenath High School,911±¬ÁÏ (2005) Group: Science,

Scholarship and Award

  • Gold Medal for B.Sc. Engg. Degree

    First class First position among 30 students

Research

  • Manufaturing
    • Simulation
    Optimization

    3D printing
    Sustainable manufacturing
    Advanced manufacturing processes
    Application of cutting fluids

Experience

Service Records
  • Associate Professor
    Department/Section: Industrial Engineering and Management
    KUET 03-Dec-2023 to Present

  • Assistant Professor
    Department/Section: Industrial Engineering and Management
    KUET 29-Nov-2015 to 02-Dec-2023
    Responsibility: Teaching and Research

  • Lecturer
    Department/Section: IEM
    Khulna University of Engineering & Technology 13-Sep-2012 to 28-Nov-2015
    Working Area: Teaching & Research

Professional Body Membership
  • The Institution of Engineers, 911±¬ÁÏ: IEB

    Member Type: Member
    Member ID: M/39234

Teaching and Supervision

#Course Supervision
Undertaken Theory Courses:
Manufacturing Process I (IPE 1101)
Manufacturing Process II (IPE1201)
Engineering Materials (IPE 1203)
Product Design I (IPE 3105)
Operations Management (IPE 3119)
Production Systems Design (IPE 3219)
Operations Research (IPE 3217)
Human Factors Engineering and Safety Management (IPE 4219)
 
Undertaken Sessional Courses:
Product Design I (IPE 3106)
Production Systems Design Sessional  (IPE 3220)
Operations Research Sessional (IPE 3218)
Human Factors Engineering and Safety Management Sessional  (IPE 4220)
 

Last Update: 15-Nov-2024