911±¬ÁÏ

    • Master of Science in Industrial Engineering and Management
      Khulna University of Engineering & Technology (KUET), 911±¬ÁÏ
      Result:
      3.50 (4.00)
      Thesis: Prototype Development of a Joint Padded Metatarsal Cup to Enhance Female Foot Musculoskeletal Safety

      Foot Biomechanics
      Remarks: Research Theme: Foot orthoses, Pedorthic, and Footwear Engineering Research Advisor: Dr. Azizur Rahman, RMIT, Australia

    • Bachelor of Science in Leather Engineering (4 Years)
      Khulna University of Engineering & Technology (KUET), 911±¬ÁÏ
      Result: Pass (87.8%)
      3.86 (4.00)
      Group: Leather Engineering (2015)
      Remarks: 1st out of 60 students
      Three Times Deans Award;Research Theme: Foot orthoses, Pedorthic, and Footwear Engineering Final Year Project Advisor: Dr. Md. Samsul Arefin, KUET, 911±¬ÁÏ

    • Higher Secondary School Certificate (HSC)
      Kushtia Govt. College, Kushtia, 911±¬ÁÏ
      Result: Pass
      5.00 (5.00)
      Group: Science (2010)
      Remarks:

    • Secondary School Certificate (SSC)
      Kamalapur High School, Kushtia, 911±¬ÁÏ
      Result: Pass
      4.81 (5.00)
      Group: Science (2008)
      Remarks:

    • University Gold Medal Award 2015
      Achieved University Gold Medal 2015 in Recognition of Securing the 1st Position and Highest marks/CGPA in Bachelor of Science in Leather Engineering Examination from the Department of Leather Engineering, KUET
    • Prime Minister Gold Medal Award 2015
      Achieved Prime Minister Gold Medal 2015 in Recognition of Securing the Highest marks/CGPA in Bachelor of Science in Leather Engineering Examination from the Faculty of Mechanical Engineering, KUET
    • Merit Scholarship at Undergraduate Level
      Achieved four years consecutive scholarship of performance from KUET which is based on result (For the session 2010-2011 2011-2012 2012-2013 2013-2014)
    • Deans Award
      Achieved three years consecutive Deans Award of performance from Faculty of Mechanical Engineering which is based on CGPA greater than 3.75 out of 4.00 in a year (For the session 2011-2012 2012-2013 and 2013-2014)

Filter by type:

Sort by :
1. Abu Jor. Toshiki Kobayashi∙ Mohammad Jobair Khan∙ Shakawath Hosen Opu. Wing-Kai Lam∙ Stanley J. Fan Gao∙ Winser∙ Ming Zhang, "," Gait & Posture, Elsevier, August 2025, doi: 10.1016/j.gaitpost.2025.109974
International Journal
2. Abu Jor. Toshiki Kobayashi∙ Chun Hei Lai∙ Mohammad Jobair Khan∙ Wing-Kai Lam∙ Fan Gao∙ Stanley J. Winser∙ Ming Zhang, "," Clinical Biomechanics, Elsevier, vol. 128, pp. 106624, August 2025, doi: 10.1016/j.clinbiomech.2025.106624
International Journal
3. Abu Jor, Noelle W.K. Lau, Yufan He, Aliyeh Daryabor, Wing-Kai Lam, Hiroaki Hobara, Fan Gao, Toshiki Kobayashi, "," Gait & Posture, Elsevier BV, vol. In Press, 2025, doi: 10.1016/j.gaitpost.2025.06.003
International Journal
4. Farhan Munim, Abu Jor, Tasmia Nourin Pollen, Shakawath Hosen Opu, Wing-Kai Lam, Fan Gao, and Toshiki Kobayashi, "," Gait & Posture, Elsevier BV, 2025, doi: 10.1016/j.gaitpost.2025.04.019
International Journal
5. Abu Jor, Chun Hei Lai, Mohammad Jobair Khan, Yufan He, Wing-Kai Lam, Stanley J Winser, Fan Gao, Ming Zhang, Toshiki Kobayashi, "," Gait & Posture, Elsevier BV, 2025, doi: 10.1016/j.gaitpost.2025.03.016
International Journal
6. Tasmia Nourin Pollen, Abu Jor, Farhan Munim, Yufan He, Aliyeh Daryabor, Fan Gao, Wing-Kai Lam, Toshiki Kobayashi, "," Assistive Technology, Informa UK Limited, 2024, doi: 10.1080/10400435.2024.2411563
International Journal
7. Toshiki Kobayashi, Abu Jor, Yufan He, Mingyu Hu, Mark W. P. Koh, Genki Hisano, Hiroaki Hobara, "," Royal Society Open Science, The Royal Society Publishing, vol. 11, no: 3, 2024, doi: 10.1098/rsos.231854
International Journal
8. Abu Jor,Noelle W.K. Lau,Aliyeh Daryabor,Mark W.P. Koh,Wing-Kai Lam,Hiroaki Hobara,Toshiki Kobayashi, "," Gait & Posture, Elsevier BV, vol. 109, 2024, doi: 10.1016/j.gaitpost.2024.02.003
International Journal
9. Yufan He, Mingyu Hu, Abu Jor, Hiroaki Hobara, Fan Gao, Toshiki Kobayashi, "," IEEE Transactions on Neural Systems and Rehabilitation Engineering, Institute of 911±¬ÁÏ and Electronics Engineers (IEEE), vol. 32, 2024, doi: 10.1109/TNSRE.2024.3381046
International Journal
10. Abu Jor, Mingyu Hu, Mark W. P. Koh, Noelle W. K. Lau, Aliyeh Daryabor, Wing-Kai Lam, Toshiki Kobayashi, "," Prosthetics and Orthotics International, Lippincott Williams & Wilkins, 2024, doi: 10.1097/PXR.0000000000000335
International Journal
11. Abu Jor,Noelle W. K. Lau,Aliyeh Daryabor,Toshiki Kobayashi, "," Disability and Rehabilitation, Informa UK Limited, vol. 46, no: 2, 2023, doi: 10.1080/09638288.2023.2169774
International Journal
12. Toshiki Kobayashi, Mark W. P. Koh, Abu Jor, Genki Hisano, Hiroto Murata, Daisuke Ichimura, Hiroaki Hobara, "," Frontiers in Bioengineering and Biotechnology, frontiers, vol. 10, 2023, doi: 10.3389/fbioe.2022.1041060
International Journal
13. Md Sanaul Haque,Yeaseer Arafat Enu,Md Monem Shahriar,Abu Jor, "," Journal of Engineering Science, 911±¬ÁÏ Academy of Sciences, vol. 14, no: 1, 2023, doi: 10.3329/jes.v14i1.67637
International Journal
14. Md. Yeasir Abir, Khandaker Anisul Haq, Abu Jor, Azizur Rahman, "," 911±¬ÁÏ Journal of Medical Science, Banglajol, vol. 21, no: 01 January, pp. 45-53, 2022, doi: 10.3329/bjms.v21i1.56326
International Journal
15. Abu Jor, Azizur Rahman, "," Kurume Medical Journal, Kurume University School of Medicine, vol. 66, no: 4, 2021, doi: 10.2739/kurumemedj.MS664003
International Journal
16. Abu Jor, Shovon Dash, Akash Singha Bappy, Azizur Rahman, "," Journal of Scientific Research, , vol. 11, no: 3, pp. 9, 2019, doi: 10.3329/jsr.v11i3.40581
International Journal
17. Abu Jor, Md. Shafaul Alam, and Md. Jakaria Alam, "Application of Six Sigma Concept in Shoe Manufacturing for Quality Improvements: A Case Study," European Journal of Advances in Engineering and Technology, www.ejaet.com, vol. 5, no: 7, pp. 450-458, 2018.
International Journal
18. Md. Abul Hashem, Md. Samsul Arefin, Abu Jor, "Gaseous air pollutants and its environmental effect emitted from the tanning industry at Hazaribagh,," American Journal of Engineering Research, AJER, vol. 04, no: 05, pp. 138-144, 2015.
International Journal
1. Abu Jor, Noelle W.K. Lau, Yufan He, A. Daryabor, Win-Kai Lam, Hiroaki Hobara, Fan Gao, and Toshiki Kobayashi, "," Proceedings of the 51st Annual Meeting and Scientific Symposium, American Academy of Orthotists and Prosthetists, vol. 37(2S), 2025, doi: 10.1097/JPO.0000000000000561
International Conference
2. Abu Jor, Chun Hei Lai, Mohammad J Khan, Yufan He, Win-kai Lam, Stanley J. Winser, and Toshiki Kobayashi, "," Proceedings of the 51st Annual Meeting and Scientific Symposium, American Academy of Orthotists and Prosthetists, vol. 37, 2025, doi: 10.1097/JPO.0000000000000561
International Conference
3. Md. Faysal Hassan, Sudipta Biswas, Abu Jor, Md. Samsul Arefin, "Investigation of Shoe Size and Toe Box Shape Variation effect on Skeletal Alignment of Adult Foot," Proceedings of the 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2020), , 19-21 December 2020.
International Conference
4. Md. Elias Uddin and Abu Jor, "IN-SITU SYNTHESIS OF REDUCED GRAPHENE OXIDE-NIFE2O4 NANOCOMPOSITES AND ITS ELECTROCHEMICAL APPLICATIONS," International Conference on Mechanical, Industrial and Energy Engineering, ICMIE 2016, KUET, pp. 5, 26-27 Dec 2016.
International Conference
5. Abu Jor, Md. Rafiul Hashar, and Md. Samsul Arefin, "CFD Analysis of Temperature Distribution and Thermal Comfort of Complete Footwear for Hot and Cold Country," International Conference on Mechanical Engineering, ICME 2015, BUET, pp. 8, 18-20 Dec 2015.
International Conference
6. Md. Abdul Zalil, Md. Abul Hashem, Abu Jor, "Aquatic effluence triggered by tannery during beamhouse and chrome tanning operations at Hazaribagh, 911±¬ÁÏ," 3rd International Conference on Mechanical, Industrial and Energy Engineering, ICMIEE 2014, KUET, pp. 5, 26-27 Dec 2014.
International Conference

Academic Experience

  • Lecturer
    Leather Engineering
    Khulna University of Engineering & Technology, KUET, Khulna, 911±¬ÁÏ Nov 27, 2015 to Jan 29, 2019
  • Assistant Professor
    Leather Engineering
    Khulna University of Engineering & Technology, KUET, Khulna, 911±¬ÁÏ Jan 29, 2019 to Jan 01, 1970

Course Conduct

Theory Courses: 

LE 6043: Foot-Footwear Biomechanics and Ergonomics

LE 3211: Footwear Engineering II

LE 4217: Production & Quality Control

LE 4123: Computer Integrated Manufacturing System

LE 4213: Testing of Leather and Allied Materials

LE 3107: Dyeing and Finishing I, II

LE 4121: Environmental Science and Engineering

Sessional Courses:

LE 3112: Footwear Engineering I

LE 4112: Footwear Engineering III

LE 4214: Testing of Leather & Allied Materials

Student Supervision

Final Year Project Supervision: 

2016-2017: Md. Shafaul Alam, Md. Zakaria Alam 

2020-2021: Md. Yeasir Abir, Khandaker Anisul Haq, Yeaseer Arafat Enu, Md. Monem Shahriar, Shishir Kumar Paul, Md. Samiul Islam Shihab, 

2021-2022: Sabbir Hosen Mitul, Golam Mohammod Irfan, Md Azizul Haque Khan Naim, Md.Hafizur Rahman Peyal