911爆料

Department of Leather Engineering

Avatar

Adhir Chandra Paul

Assistant Professor
+880-41-769468-75 Ex.-759 (off.)
[email protected]
Research Interest: Interested Research Area: Biodegradable Polymer Composite, Biomaterial, Materials for Footwear & Leather Products, Solid Waste Management, Wastewater Treatment

Print Profile

Bio

Welcome to look over my website. Currently, I am serving as an Assistant Professor at the Department of Leather Engineering, Khulna University of Engineering & Technology (KUET), Khulna, 911爆料. Really, I feel proud to be a member of this family almost at the commencement of this Department. Nowadays, Leather & Leather Products including Footwear will be the subsequent cash cow for 911爆料 after the RMG sector and it芒鈧劉s had a significant impact on the economy of 911爆料.

I have been graduated from the Institute of Leather Engineering and Technology (ILET) [Erstwhile 911爆料 College of Leather Technology, Dhaka], University of Dhaka. During my final year student in an undergraduate program, I have been successfully completed an industrial training program for three months in PICARD 911爆料 Limited, Savar, Dhaka. After graduation, I have started service as a Design Executive at Apex Footwear Limited, Gazipur, Dhaka. I was involved with this renowned footwear manufacturing organization for almost two and half years in the product development (R&D) department.

About research, I am interested in biodegradable polymer composite for Leather products including Footwear, Collagen and Keratin based Biomaterials, Comfort studies of Footwear and Leather Garments, Solid waste management of Leather and allied materials, Wastewater treatment, Thermal Pyrolysis, and Power harvesting Footwear.

Now, I am the teacher-in-charge of two well-equipped laboratories:

  • Computer Integrated Manufacturing Systems Laboratory [Which contain Shoemaster Power, Creative, Leather Goods Software including 2D & 3D Digitizer Board and Plotter]
  • Footwear Manufacturing Workshop [Which contain Toe Lasting Machine, Heat Setting Machine, Molding Machine and so on]

Finally, you are most welcome to explore different sections of my profile. Thanks a lot for visiting my site.

Publication

Journal
7.
6.
5.
4. Mamun,M. A. A. , Hasan,R. , Ahmed,M. R. , Paul,A. and Raha,R. (2019) , " Antifungal Efficacy of Neem Leaves (Azadichta Indica) and Mahagony Fruit Bark (Swietenia Mahagony) Extracts on Leather Shoes," 911爆料 Journal of Scientific and Industrial Research (BJSIR), 911爆料 Academy of Sciences, vol54, no.03, pp.257-262
3. Abdulla-Al-Mamun,M. A. , Paul,A. C. , Raha,R. K. and Binty,T. W. (2019) , " Cost-effective Different Ladies Jewelry from Leather Products Wastages," International Journal of Engineering Research & Technology, IJERT, vol08, no.02, pp.154-158
2. Hashem1*,M. ,Paul,A. and Hasan,S. H. a. A. (2017) , " Renewable energy from the waste soles through thermal pyrolysis 芒鈧�� A novel approach," 911爆料 Journal of Scientific and Industrial Research (BJSIR), 911爆料 Academy of Sciences, volVol. 52, no.2, pp.141-146
1. Paul,A. C. , Abdullah-Al-Mamun,M. A. , Ray,S. K. and Islam,M. A. (2015.) , " Cost-effective Design Development of Medicated Footwear for Diabetic Patients," International Journal of Engineering Research & Technology, IJERT, vol04, no.08, pp.637-641
Conference
20. Paul,A. C. and Opu,D. M. E. U. a. S. H. (29-30 December 2022) , "Collagen Protein Extraction from Fresh Hide Trimmings: Waste to Wealth Approach," 8th International Integrative Research Conference on Governance in Society, Business and Environment, INSEARCH 2022
19. Paul,A. C. and Biswas,M. S. R. a. S. (03-05 November 2022) , "Acid dye Remediation through Pyrolytic Fresh Charcoal of Waste Footwear Sole," 5th International Conference on Academic Research in Science, Technology and Engineering (ICARSTE)
17. Paul,A. C. ,Ali,M. M. and jail,A. (18-19 December 2021) , "Chromium Removal from Tannery Waste Water Using Shorea Robusta Leaf Adsorbent," 7th International Integrative Research Conference on Governance in Society, Business and Environment, INSEARCH 2021
16. Paul,A. C. and Saha,A. A. a. P. (03-05 November 2021) , "Exploration of Footwear Sole from Styrene Butadiene and Natural Rubber with Chrome Shaving as Filler," XXXVI IULTCS Congress 2021 (Congress of the international Union of Leather Technologists and Chemists Societies)
15. HOSSAIN,M. A. ,Abdullah-Al-MAMUN,M. A. and PAUL,A. C. (21st October 2021) , "Innovation and Smart Footwear Design for Energy Harvesting: A Sustainable Approach," International Conference on New technologies, new materials and new forms of footwear sales
14. Paul,A. C. , Anjum,N. J. , Alam,S. R. and Paul,N. (19-21 December, 2020) , "Compatibility of Different Fusible Interlinings with Goat Nappa Leather," 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) , ICMIEE-ID-037
13. paul,A. C. ,Shuvo,M. R. A. and Tushar,M. M. R. (10-14 August, 2020) , "Treatment of Tannery Wastewater through Calcium Carbonate from Mollusca (Snail Shell)," 5th NA International Conference on Industrial Engineering and Operations Management , Abstracting, IEOM-ID-159, pp. 717
12. paul,A. C. ,Rakin,S. I. and Munna,A. R. A. (19-22 December, 2020) , "Effect of Leather Trimming and Neem Fiber on the Mechanical and Thermal Property of Cement Based Materials," 6th International Conference on Chemical Engineering (ICChE) , Poster Presentation, ICChE-2020-ID-133
11. paul,A. C. ,Sadik,M. N. and Rony,M. S. R. (19-22 December, 2020) , "Variations of Foot Measurement of Primary School Going Students through Binary Logistic Regression Analysis-A Case Study in Khulna Region," 6th International Conference on Chemical Engineering (ICChE) , Poster Presentation, ICChE-2020-ID-132
10. paul,A. C. ,Shuvo,M. R. A. and Tushar,M. M. R. (19-22 December, 2020) , "Bio Catalytic Treatment of Tannery Wastewater through Calcium Carbonate from Mollusca (Snail Shell)," 6th International Conference on Chemical Engineering (ICChE) , Poster Presentation, ICChE-2020-ID-130
9. Paul,A. C. ,Waliullah,M. and Galib,M. A. A. (17-19 December, 2019) , "Utilization of Natural Dye Extracted from Spent Tea Leaves (Camellia Sinensis) for the Dyeing of Leather," 4th International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) , ICMIME-ID-RT-6
8. Paul,A. C. , Hasan,M. A. , Ali,M. M. , Jalil,M. A. and Tushar,M. M. R. (11-13 December, 2019) , "Footstep Power Generation and Performance Analysis through Different Types of Footwear Styles," 5th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) , ICMERE-PI-88
7. Paul,A. C. ,Khan,J. and kamal,R. (11-13 December, 2019) , "Absorptive remediation of chromium contaminated tannery effluents by utilization of Mahagoni Tree (swietenia mahagoni) Bark," 5th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) , ICMERE-PI-87
6. Paul,A. C. ,Noor-E-Imam,N. and Hossain,S. (23-24 December, 2018) , "Application of lean and six sigma tool to waste reduction and productivity improvement in footwear industry," 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) , ICMIEE-ID-260
5. Paul,A. C. ,Islam,M. A. and Hossain,M. S. (23-24 December, 2018) , "Studies on Sewing Complication through Pareto Chart and Cause-Effect Diagram Analysis of a Footwear Industry," 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) , ICMIEE-ID-261
4. Saif,M. N. ,Hossain,M. A. and Paul,A. C. (28-30th December; 2017) , "Improvement of Productivity through Manipulating the Fabrication Layout in Sewing Department of a Footwear Industry," International Conference on Mechanical Industrial and Material Engineering (ICMIME) , ICMIME-ID-IE-225
3. Paul,A. C. ,Ahasanuzzaman,S. and Alam,A. (23-25th December; 2017) , "A study on the correlation between human left and right foot based on foot length and foot width and foot joint girth of 911爆料i male," International Conference on Mechanical Industrial and Material Engineering (ICMIME) , ICMIME-ID-RT-226, pp.01-06
2. Hashem,M. A. ,Paul,A. C. and Hossain,S. (2015) , "Utilization of waste sole as a source of energy through thermal pyrolysis," 11th International Conference on Mechanical Engineering
1. Ray,S. K. , Paul,A. C. , Islam,M. A. and Dutta,M. (26 - 29th November; 2015) , "The development and Quality enhancement of medicated Footwear for consciousness about diabetic foot troubles for the diabetic patients," International Conference on Mechanical Engineering and Renewable Energy , ICMERE-PI-172

Education

M. Sc. in Leather Engineering
Khulna University of Engineering & Technology,911爆料 (2023)

B.Sc. in Leather Products Technology
Institute of Leather Engineering and Technology (ILET), University of Dhaka [Erstwhile 911爆料 College of Leather Technology, University of Dhaka],911爆料 (2003-2006) Group: Leather Products Engineering, Student Type: Regular, Merit Position: First Class First, Achievement: First Class 1st Position in the Department
Passing year 2006 [4th year Final Exam held in 2008 & Result published in Sep., 2009]

Higher Secondary School Certificate
Allauddin Siddique College,911爆料 (2000-2001) Group: Science, Student Type: Regular,

Secondary School Certificate
Shahid Jamal High School,911爆料 (1995-1999) Group: Science, Student Type: Regular, Achievement: Obtain 1st Position in my School

Scholarship and Award

  • University Technical Scholarship

    Achieved four years consecutive Scholarship based on Merit Position at Institute of Leather Engineering & Technology (ILET),
    University of Dhaka

Research

  • Interested Research Area: Biodegradable Polymer Composite, Biomaterial, Materials for Footwear & Leather Products, Solid Waste Management, Wastewater Treatment

    • Collagen and Keratin Based Biomaterials for Biomedical Application

    • Biodegradable Polymer Composite for Footwear Materials

    • Solid waste management of Leather and allied materials

    • Comfort studies of Footwear and Leather Garments

    • Simulation & Modeling: Last, Customized Footwear

    • Power harvesting Footwear

    • Wastewater Treatment

    • Thermal Pyrolysis


Experience

Service Records
  • Senior Design Executive
    Department/Section: Product Development (R & D)
    Apex Footwear Limited 04-Jul-2025 to 04-Jul-2025
    Working Area: New Product Development
    Responsibility: Design & Development of different Footwear styles including Oxford, Derby, Loafer, Mocassino, and so on. Besides that, Providing Technical Support to the Production Team during Production. Coordination among Merchandising, Planning, Marketing, Commercialization, and Production. To Explore Innovative Footwear which comprises contemporary Fashion Trends and Satisfy the consumer demands.

  • Assistant Professor
    Department/Section: Leather Engineering
    Khulna University of Engineering & Technology (KUET) 04-Jul-2025 to 04-Jul-2025
    Responsibility: Teaching, Research and Student Supervise

  • Lecturer
    Department/Section: Leather Engineering
    Khulna University of Engineering & Technology (KUET) 04-Jul-2025 to 04-Jul-2025
    Responsibility: Teaching, Research and Student Supervise

Professional Body Membership
  • Leather, Footwear and Leather Products Technologist Association (LFLPTA), 911爆料

    Member Type: General
    Member ID:

  • Leather Engineers & Technologists芒鈧劉 Society, 911爆料

    Member Type: General
    Member ID:

Teaching and Supervision

#Course Conduction
  • Successfully supervised some Undergraduate Thesis:
    1. Footstep Power Generation and Performance Analysis through Different Footwear Styles.
    2. Utilization of Waste Sole as a Source of Energy through Thermal Pyrolysis.
    3. Development and Quality Enhancement of Diabetic footwear for Consciousness about Diabetic foot troubles for the Diabetic Patients.
    4. A Study of the Correlation between Human Left and Right Foot Based on Foot Length, Foot Width and Foot Joint Girth.
    5. Exploration of Footwear Sole from Styrene Butadiene Rubber and Natural Rubber with Chrome Shaving as a Filler.

    In addition, currently I am supervising six undergraduate thesis students.

    #Course Supervision

    01. LES 2100: Design & Pattern Making Practices: 0.75 credit 02. LE 3111: Footwear Engineering I: 3.0 credit 03. LE 3112 Sessional on LE 3111: 0.75 credit 04. LE 3211: Footwear Engineering II: 3.0 credit 05. LE 3212: Sessional on LE 3211: 0.75 credit 06. LE 3109: Leather Products Engineering I: 3.0 credit 07. LE 3110: Sessional on LE 4111: 0.75 credit 08. LE 3109: Leather Products Engineering I: 3.0 credit 09. LE 3110: Sessional on LE 3109: 0.75 credit 10. LE 3209: Leather Products Engineering II: 3.0 credit.

    11. LE 3210: Sessional on LE 3209: 0.75 credit 12. LE 4109: Leather Products Engineering III: 3.0 credit 13. LE 4110: Sessional on LE 4109: 0.75 credit 14. LE 4123: Computer Integrated Manufacturing Systems (CIMS): 3.0 credit 15. LE 4124: Sessional on LE 4123: 1.5 credit 16. LE 4213: Testing of Leather & Allied Materials: 3.0 credit 17. LE 4214: Sessional on LE 4213: 1.5 credit 18. LE 4025: Materials Science for Footwear Products: 3.0 credit 19. LE 4026: Sessional on LE 4025: 0.75 credit 20. LE 2205 : Leather and Polymer Chemistry: 4.0 credit 21. LE 2206: Sessional on LE 2205: 0.75 credit 22. LE 4000: Project Work/Thesis: 4.50 Credit.


Last Update: 10-Mar-2024