911±¬ÁÏ

Publication

• 2. Nil Ratan Mondal , Md. Minar Ahmed , Md. Samsul Arefin and Mahabub Hasan Rony, "Performance Analysis of Poly Vinyl Chloride Outsole Using FEA Method," Journal of Applied Mechanics and Materials, Scientific.net, vol. 860 , no: ISSN:1662-7482, pp. 146-151, December, 2016.
• 1. Md. Abul Hashem, Md. Samsul Arefin, and Marjjuk Ahmed, "Estimation and Environmental Effect of Tannery Effluent from Wet Salted Goat Skin in Beam House Operations: 911±¬ÁÏ Perspective," International Journal of Environment, BENJapan, vol. No. 4 , no: No. 2, pp. 39-45 , October, 2014.

• 10. Quazi Farjana Lamia, Surojit Mondal, Md. Samsul Arefin and Md. Abul Hashem, "Sheep intestine catgut string could be used for footwear material," International Conference on Mechanical, Industrial and Energy Engineering, ICMIEE 2016, KUET, Khulna, 911±¬ÁÏ, , pp. PI-160326, 26-27 December, 2016.
• 9. Muhammad Naimul Hasan , Md. Imrul Kayes Limon, Md. Samsul Arefin and Md. Zahid Hasan, "Bond strengths analysis of polyurethane and polychloroprene adhesives for different upper and soling materials," International Conference on Mechanical, Industrial and Energy Engineering, ICMIEE 2016, KUET, Khulna, 911±¬ÁÏ, , pp. 160202-2, 26-27,December,2016.
• 8. Nil Ratan Mondal , Md. Minar Ahmed , Md. Samsul Arefin and Mahabub Hasan Rony, "Performance Analysis of Poly Vinyl Chloride Outsole Using FEA Method," 1st International Conference on Materials and Manufacturing Engineering, ICMME 2015, , pp. 68, 25-27 December, 2015..
• 7. Md. Samsul Arefin, Abu Jor and Md. Rafiul Hashar, "CFD Analysis of Temperature Distribution and Thermal Comfort of Complete Footwear for Hot and Cold Country," 11th International Conference on Mechanical Engineering, ICME 2015, , 18-20 December ,2015..
• 6. Nil Ratan Mondal, Md. Minar Ahmed, Md. Samsul Arefin and Mahabub Hasan Rony , "A Finite Element Analysis to Design and Simulation of Effective Shank Piece in Ladies High Heel Shoe," International Conference on Mechanical Industrial and Materials Engineering, ICMIME2015 , , pp. 115, 11-13 December ,2015..
• 5. Md. Ibnul Hasan, Taufiq Rashid and Md. Samsul Arefin , "An Analysis on the Sustainability of Different Outsole Materials During Shoe Flexing Using FEA Method," International Conference on Mechanical, Industrial and Materials Engineering , ICMIME 2015, , pp. 106, 11-13 December, 2015..
• 4. Md. Abu Sayeed, Sk. Mohammed Ali Rony, Md. Samsul Arefin and Md. Bashir Uddin, "Investigation of Bodyweight Distribution on Metatarsophalangeal Joint of Human Foot for Ladies High Heel Footwear," International Conference on Mechanical, Industrial and Materials Engineering , ICMIME 2015, , pp. 114, 11-13 December, 2015..
• 3. Md. Samsul Arefin, Md. Rafiul Hashar and Abu Jor, "Temperature Distribution and Thermal Comfort Analysis of a Shoe for Summer and Winter Season Using CFD Technique: 911±¬ÁÏ Perspective," International Conference on Mechanical, Industrial and Materials Engineering , ICMIME 2015, , pp. 124, 11-13 December, 2015.
• 2. Md. Samsul Arefin, Nil Ratan Mondal, Md. Minar Ahmed and Md. Abul Hashem , "An emerging approach in Footwear Industry to introduce Finite Element Analysis Method for Physical Properties of the Outsole," International Conference on Mechanical Engineering and Renewable Energy, ICMERE 2015 , , pp. 72, 26-29 November,2015.
• 1. Md. Abul Hashem*1, Marjjuk Ahmed2, Md. Samsul Arefin1, "Estimation of solid and liquid wastes generated in beamhouse operations from the wet salted goat skin," International Conference on Mechanical,Industrial and Energy Engineering, ICMIEE 2012, , pp. MIE112-113, 01-02 February ,2013..

Education

• Doctor of Philosophy (PhD) in Biomedical Engineering (Major: Biomechanics)
  National Cheng Kung University, Taiwan
  Result: A+ (90%)
  
  Thesis: Effect of Adjustable Shoe Configurations on Torsional Mechanical Properties and Performance of Sidestep Running Cuts
  
  Biomechanics
  Remarks:
  Score: 90%
  
  
• Bachelor of Science (BSc) in Footwear Technology (4 years)
  Institute of Leather Engineering & Technology, University of Dhaka, 911±¬ÁÏ
  Result: 1st Class (68.38%)
  
  Group: Department of Footwear Engineering (2006 (Exam held in 2008))
  Remarks: First Class 2nd
  Merit Position: 1st class 2nd position in the Department.
  
  
• Higher Secondary Certificate (HSC)
  Dhaka College, Dhaka, 911±¬ÁÏ
  Result: 1st Division (74.8%)
  
  Group: Science (2002)
  Remarks:
  Results: First Division
  
  
• Secondary School Certificate (SSC)
  Charkalia High School, Chandpur, 911±¬ÁÏ
  Result: 1st Division* (81.9%)
  
  Group: Science (2000)
  Remarks:
  Obtained Star Marks and 1st position in my school, exam centre & Matlab North Upazila
  
  

Scholarship and Award

• University Technical Scholarship (Part I to Part IV), Consecutive Four Years
  Based on Merit at Institute of Leather Engineering & Technology (ILET), University of Dhaka
• Comilla Education Board SSC Scholarship (Jan 2001-Dec 2002)
  
• Government Junior Scolarship-1997 (Class IX to Class X)
  
• Sena Kalyan Sangstha Scholarship (Class VI- Class X)
  

Research

• Applications of research to design of all types of functional and purpose-built footwear
  Biomechanics of human foot & footwear design
  Influence of footwear and footwear design on human performance ;kinematics and kinetics of human movement
  Footwear in prevention and treatment of diseases of lower extremity
  In-shoe foot motion analysis
  Simulation & Modelling :Footwear & Materials
  Shoe properties and human perceptions
  
  
  
  
  

Academic Experience

• Associate Professor
  Department of Leather Engineering
  Khulna University of Engineering & Technology (KUET), Khulna-9203, Bngladesh Dec 01, 2024 to Jan 01, 1970
  Working Area: Teaching and Research
• Lecturer
  Department of Leather Engineering
  Khulna University of Engineering & Technology (KUET), Khulna-9203, Bngladesh Jun 10, 2012 to Jul 04, 2015
  Working Area: Teaching and Research
• Assistant Professor
  Department of Leather Engineering
  Khulna University of Engineering & Technology (KUET), Khulna-9203, 911±¬ÁÏ Jul 05, 2015 to Nov 30, 2024
  Working Area: Teaching and Research

Professional Membership

• General
  Leather Engineers & Technologists’ Society, 911±¬ÁÏ

Course Conduct

BSc Engineering:

• Footwear Design and Manufacturing-I (Theory): 3 credit
• Footwear Design and Manufacturing-I (Lab): 0.75 credit
• Material Science for Footwear Products (Theory): 3 Credit
• Material Science for Footwear Products (Lab): 0.75 Credit
• Computer Intigrated Manufacturing Systems (CIMS)(Theory): 0.75 Credit
• Computer Intigrated Manufacturing Systems (CIMS)(Lab): 1.5 Credit

MSc Engineering: 

• Foot-Footwear Biomechanics and Ergonomics (Theory): 3 credit
• Advanced Footwear Design and Manufacturing Technology (Theory): 3 credit

Supervision

MSc Engineering Student-01

Student Corner