Dr. Md. Abdul Hasib

Bio

Dr. Md. Abdul Hasib is a Professor in the Department of Mechanical Engineering at Khulna University of Engineering & Technology (KUET), 911爆料. He holds M.Sc. and Ph.D. degrees from Japan, specializing in advanced mechanical engineering disciplines. With expertise in fatigue and fracture mechanics, material behavior under stress, composite materials, material characterization, and sustainable materials, Dr. Hasib’s research has significantly contributed to understanding material degradation, structural integrity, and thermal management in engineering applications. His work aims to enhance the durability, efficiency, and sustainability of engineering materials used in modern industrial applications.

Prof. Hasib is deeply engaged in both research and academic mentorship, guiding undergraduate and postgraduate students in cutting-edge mechanical engineering studies. His expertise encompasses both experimental and computational analysis of material degradation, fracture mechanics, failure analysis, stress-strain characterization, and the thermal and mechanical performance of advanced materials, with a focus on enhancing material reliability and performance in engineering applications. He has published in peer-reviewed journals and international conferences, collaborating with other academia.

Throughout his academic career, he has received several prestigious awards and scholarships, including Best Paper Awards at international conferences, the Excellent Paper Award for a journal publication, the Dean’s Award for academic excellence during his master's studies, and the esteemed Miura Award from the Japan Society of Mechanical Engineers (JSME).

Prof. Hasib also serves as a Testing Officer and Consultant at the Consultancy, Research, and Testing Services (CRTS) in the Department of Mechanical Engineering at KUET. He actively welcomes collaboration with researchers, students, and industry professionals interested in advancing knowledge and applications related to his expertise.

Publication

International Journal

27. Sajjad Hossain, Md Shariful Islam, Md.Ashraful Islam, Md. Abdul Hasib and Md. Seam Shaikh, "," Hybrid Advances, Hybrid Advances, vol. 11, pp. 1-14, 2025, doi: https://doi.org/10.1016/j.hybadv.2025.100534
26. Palash Das, Md. Ashraful Islam, Md. Abdul Hasib, "Corrective and new research frontier of dual- phase -lag non-Fourier heat conduction in functionally graded cylindrical materials with bi-directional property variations," International Journal of Thermofluids, , vol. 24, 100861, 2024.
25. Sumit Chanda, Md. Abdul Hasib, Arafater Rahman, Md. Abdul Wadud, "Parametric Study on Cellular Negative Stiffness Honeycomb Meta-Structures: Effect on the Energy Absorption Performance," Engineering Proceedings Journal, , vol. 76, 51, 2024.
24. Tasfia Tasnim, M.S. Rabbi, Md. Mahmudul Adil, Md. Abdul Hasib, "An Experimental Study on Jute/Banana Fiber Reinforced Poly(vinyl alcohol) Composites with Nanofiller," Journal of Vinyl & Additive Technology, , vol. 5, 2024.
23. Arafater Rahman, Md. Abdul Wadud, Md. Abdul Hasib, Md. Ashraful Islam, "Sustainable Bicycle Crank Arm Selection Using Life Cycle Analysis under Typical Cycling Pedal Forces," Engineering Proceedings Journal, , vol. 76, 6043, 2024.
22. Md Tamzid Shaharier, Dipayan Mondal, Md Abdul Hasib, Md Ashraful Islam, "Effects of gas-liquid flow and dehumidification performance of a liquid desiccant dehumidifier: A numerical approach for vertical smooth & rough, and inclined rough plates," Journal of Thermal Engineering, , vol. 10, no: 6, 2024.
21. Md Ahsanul Bari, Dipayan Mondal, Md. Abdul Hasib, "Impact of air flow, temperature distribution, and heat transmission in a refrigerator compartment with and without shelves: A numerical approach," Journal of Thermal Engineering, , vol. 10, no: 6, 2024.
20. Arup Kumar Debnath, Rubiat Mustak, Md. Abdul Hasib, "Investigation of Mechanical Properties of Timber Beam Reinforced with Glass Fiber," Journal of Engineering and Technology (JET), , vol. 16, no: 1, 2024.
19. Palash Das, Md. Ashraful Islam, Somnath Somadder, Md. Abdul Hasib, "Analytical and numerical solutions of pressurized thick-walled FGM spheres," Archive of Applied Mechanics, , vol. 93, 2023.
18. Arafater Rahman, Md. Abdul Hasib, Md. Ashraful Islam, Intekhab Alam, Sumit Chanda, "Fabrication and Performance Investigation of Natural-Glass Fiber Hybrid Laminated Composites at Different Stacking Orientations," Journal of Natural Fibers, , vol. 20, 2023.
17. Takuichiro Ino, Yohei Sonobe, Atsuhiro Koyama, Akihide Saimoto, Md. Abdul Hasib, "2D Stress Analysis of an Infinite Plate with Orthotropic Inclusions by Embedding Continuous Force Doublet," Journal of Multiscale Modelling, , vol. 13, 2022.
16. Afnan Hasan, M.S. Rabbi, Md. Maruf Billah, Md. Abdul Hasib, "Effect of chemical treatments on properties of injection molded Nypa fruticans fiber reinforced polypropylene composite," Heliyon, , vol. 8, 2022.
15. Somnath Somadder, Palash Das, Md. Ashraful Islam, Md. Abdul Hasib, "Numerical Investigation of Interfacial Distribution of Stress in Adhesive-Bonded Joints for Different Adhesive Materials," International Journal of Engineering & Applied Sciences (IJEAS), , vol. 14, 2022.
14. Md. Ashraful Islam, Md. Abdul Hasib, Mahadi Hasan, Subrata Talapatra, "Deformation Behaviour and Mechanical Response of Closed-cell Cellular Materials under Projectile Impact Using Various Shapes Impactors," International Journal of Automotive and Mechanical Engineering, , vol. 19, 2022.
13. Polas Das, Md. Ashraful Islam, Somnath Somadder, Md. Abdul Hasib, "Analytical and numerical analysis of Functionally Graded (FGM) Axisymmetric cylinders under thermo-mechanical loadings," Materials Today Communications, , vol. 33, 2022.
12. A.K.M. Nayab-Ul-Hossain, Salma Katun Sela, Md. Abdul Hasib, Md.Mahbubul Alam, Hridoy Roy Shetu, "Preparation of graphene based natural fiber (Jute)-synthetic fiber (Glass) composite and evaluation of its multifunctional properties," Composites Part C: Open Access, , vol. 9, 2022.
11. Md. Shariful Islam, Md. Abdul Hasib, "Effect of Slenderness Ratio on Fatigue Life of CFRP Strengthened Steel I-Beam," International Journal of Engineering & Applied Sciences (IJEAS), , vol. 12, no: 2, 2020.
10. Anik Das Anto, Sobahan Mia, Md Abdul Hasib, "The Influence of Number and Orientation of Ply on Tensile Properties of Hybrid Composites," Journal of Physics: Materials, , vol. 2, no: 2, 2019.
9. Aklima Khatun, Md. Abdul Hasib, Hisaho Nagano, Akihiro Taimura, "Differences in reported linguistic thermal sensation between Bangla and Japanese speakers," Journal of Physiological Anthropology, , vol. 36, no: 13, 2017.
8. Md. Abdul Hasib, Yohei Sonobe, Akihide Saimoto, "Improvement of Stress Intensity Factor Analysis using Overall Defined Basic Density Function on Crack Face," Journal of Multiscale Modelling, , vol. 8, no: 4, 2017.
7. Yohei Sonobe, Takuichiro Ino, Akihide Saimoto, Md. Abdul Hasib, Atsuhiro Koyama, Giora Shatil, "Analysis of Planar Crack Coalescence by Mesh-Free Body Force Method," Journal of Key Engineering Materials, , vol. 754, 2017.
6. Aklima Khatun, Md. Abdul Hasib, Hisaho Nagano, Akihiro Taimura, "Effect of Duration of Stay in a Temperate Area on Cold Adaptation of Tropical Indigenes," Journal of Physiological Anthropology, , vol. 27, no: 1, 2017.
5. Aklima Khatun, Sakura Ashikaga, Hisaho Nagano, Md. Abdul Hasib, Akihiro Taimura, "Cold-induced vasodilation comparison between 911爆料i and Japanese natives," Journal of Physiological Anthropology, , vol. 35, no: 13, 2016.
4. Takuichiro Ino, Md. Abdul Hasib, Toru Takase, Akihide Saimoto, "Evaluation of Accuracy for 2D Elastic-Plastic Analysis by Embedded Force Doublet Model Combined with Automated Delaunay Tessellation," Journal of Multiscale Modelling, , vol. 6, no: 4, 2016.
3. Md. Abdul Hasib, Akihide Saimoto, "Influence of Small Cavity Existing in the Vicinity of 3D Crack Front," Journal of Key Engineering Materials, , vol. 667, 2016.
2. Abdullah Al-Faruk, Md. Abdul Hasib, Naseem Ahmed, Utpol Kumar Das, "Prediction of Weld Bead Geometry and Penetration in Electric Arc Welding using Artificial Neural Networks," International Journal of Mechanical & Mechatronics Engineering IJMME- IJENS, , vol. 10, no: 4, 2010.
1. Md. Abdul Hasib, Abdullah Al-Faruk, Naseem Ahmed, "Mist Application of Cutting Fluid," International Journal of Mechanical & Mechatronics Engineering IJMME- IJENS, , vol. 10, no: 4, 2010.

International Conference

32. Arup Kumar Debnath, Md. Abdul Hasib, R. A. Emon, A. A. Kafi, S. Roy, S. Uddin, Rahim, "Effect of Elevated Temperatures on the Mechanical and Thermal Performance of Fly Ash Geopolymers with varying Carbon Fiber Content," 1st International Conferences on Core Engineering & Technology, , 2025.
31. Md. Jahid Hasan, Manish Bhadra Arnab, Moinul Hasan Sadik, Md. Abdul Hasib, Md. Ashraful Islam, "Comparison of Mechanical Properties of 3D-printed PLA+ Lattice Infills at Different Build Orientation," 8th International Conference on Mechanical, Industrial and Energy Engineering, , January 02-04, 2025.
30. Z. R. Tapti, Md. Abdul Hasib, Aup Kumar Debnath, R. A. Emon, "Influence of Elevated Temperatures on the Mechanical Properties of Bagasse Fiber-Reinforced Geopolymer Composites," 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , May 29-31, 2024.
29. Bikromjit Pal, Md. Abdul Hasib, Arup Kumar Debnath, "Assessing Heavy Metal Contamination and Public Awareness of Battery Waste Impact in Khulna, 911爆料," presented at the 7th International Conference on Mechanical Engineering and Renewable Energy 2023, , Nov. 16-18, 2023.
28. Arup Kumar Debnath, Rubiat Mustak, Md. Abdul Hasib, Arjun Roy, "Enhancing Wood's Mechanical Properties Through Carbon Fiber Reinforcement for Engineering Applications," 7th International Conference on Mechanical Engineering and Renewable Energy 2023, , Nov. 16-18, 2023.
27. Raydah Nudrat Turna, Md Abdul Hasib, Md Ashraful Islam, Nadim Hyder, "Effect of Length of Composite on CFRP Strengthened Steel Beam-Column Joints under Cyclic Load," 7th International Conference on Mechanical, Industrial and Energy Engineering, , December 22-24, 2022.
26. Anish Bajla, Md. Abdul Hasib, Pranto Karua, Md. Ashraful Islam, Md. Arafater Rahman, "Orientation Impact of Banana Fiber on the Mechanical Properties of Banana-Glass-Carbon Fiber Hybrid Composite," 2nd International Conference on Mechanical Engineering and Applied Sciences (ICMEAS-2022), , December 08-10, 2022.
25. Diganta Chanda, Tanzim Ahmed, Md. Ashraful Islam, Md. Abdul Hasib, "Investigation of Mechanical Properties of Natural Fiber Reinforced Laminated Composite," 2nd International Conference on Mechanical Engineering and Applied Sciences (ICMEAS-2022), , December 08-10, 2022.
24. Golam Rabbi, Md. Abdul Hasib, Arup Kumar Debnath, Md. Ashraful Islam, "Fracture Analysis of Adhesively Bonded Joints as a Function of Temperature," International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE 鈥� 2022), , June 25-27, 2022.
23. Md. Ashraful Islam1, Md. Zulkarna-En, Md. Abdul Hasib, A.N.M. Mominul Islam Mukut, "Numerical Simulation of Aerodynamic Performance of Biconvex Supersonic Airfoil," International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE 鈥� 2022), , June 25-27, 2022.
22. Md. Abdul Hasib, Yohei Sonobe, Akihide Saimoto, "Closed-Form Expression of Resultant Force over an Arbitrary Located Planar Polygon due to an Isolated Point Force: Application to 3D Stress Concentration Analysis by Body Force Method," 7th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2020 +1), , March 13-15, 2021.
21. Sumit Chanda, Md. Abdul Hasib, Maksudul Alam, "Numerical Analysis of Recoverable Negative Stiffness Smart Structures for Energy Absorption in Shock Isolation," 6th International Conference on Mechanical, Industrial and Energy Engineering, , December 19-21, 2020.
20. Md. Shariful Islam, Md. Abdul Hasib, "Flexural Strengthening of Steel I-Beam with Carbon Fiber Reinforced Polymer," 4th International Conference on Mechanical Engineering and Renewable Energy, , December 17-19, 2019.
19. Md. Shariful Islam, Md. Abdul Hasib, "Numerical Study of Strength and Failure Analysis of Steel I-Beam Strengthened with CFRP at Bottom Flange," International Conference on Mechanical Engineering and Renewable Energy, , December 11-13, 2019.
18. Anik Das Anto, Sobahan Mia, Md. Abdul Hasib, "Investigation of Elastic Properties of Fiber-Reinforced Composites by Micromechanical Modeling Method," 4th International Conference on Structure, Processing and Properties of Materials, , Marh 1-3, 2018.
17. Sandip Karmokar, Sobahan Mia, Md. Abdul Hasib, "Wear Behavior of Different Impeller Materials for Pumping Various Slurry," 5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE), , December 23-24, 2018.
16. Md. Abdul Hasib, Akihide Saimoto, "Simulation of rectangular crack under far field tension," M&M International Symposium for Young Researchers, , August 10-12, 2016.
15. Md. Abdul Hasib, Akihide Saimoto, "Analysis of Arbitrary Oriented Cracks by Body Force Method," Proceeding of JSME, , March 15, 2016.
14. Md. Abdul Hasib, Akihide Saimoto, "Interference Analysis of 3D Cavities and Cracks by BFM," Proceeding of JSME, , March 13, 2015.
13. Md. Abdul Hasib and Akihide Saimoto, "Analysis of Stress Distribution between Interacting Planar Cracks," International Conference on Mechanical, Industrial and Energy Engineering, , December 26-27, 2014.
12. Md. Abdul Hasib, Akihide Saimoto, "Interference Analysis of 3D Planar Cracks by Body Force Method," Proceeding of JSNJNU, Jeju National University, , October 2014.
11. Md. Abdul Hasib, Akihide Saimoto, "SIF of a Penny-shaped Crack under Bending鈥� Joint Symposium between Sister Universities on Mechanical Engineering," Proceeding of JSSUME, , August 15-17, 2014.
10. Md. Abdul Hasib and Akihide Saimoto, "Versatile Analysis of Mixed-mode 3D Planar Crack," Asian Conference on Mechanics of Functional Materials and Structures, , October 10-13, 2014.
9. Md. Abdul Hasib, Akihide Saimoto, "BFM Analysis of Planar Elliptical Cracks Using Triangular Elements," JSME 67th Kyushu Branch Conference, Proceeding of JSME, , March 13-14, 2014.
8. Md. Abdul Hasib, Akihide Saimoto, "Evaluation of 3D crack Interaction by BFM," 26th Computational Mechanics Conference (CMD), Proceeding of JSME, , November 2-4, 2013.
7. Md. Abdul Hasib, Akihide Saimoto, "Interference Analysis of spherical cavity and penny-shaped crack," Mechanics and Materials Conference (M&M), Proceeding of JSME, , October 12-14, 2013.
6. Akihide Saimoto, Md. Abdul Hasib, "Accuracy of Stress Concentration Analysis for 3D Cavities using Planner Triangle Surface Elements for General Purpose," Mechanics and Materials Conference (M&M), Proceeding of JSME, , September 22-24, 2012.
5. Md. Abdul Hasib, Akihide Saimoto, "Interference effect between cavities in an infinite solid under tension," Proceeding of the Joint Symposium between Sister Universities on Mechanical Engineering (JSSUME), , August 24-26, 2012.
4. Md. Alaudddin, Md. Kamrul Islam, Md. Abdul Hasib, Khandkar Aftab, "Heat Transfer Characteristics in an Enclosure with Heated Object at the Side Wall," Proceedings of the 13th Asian Congress of Fluid Mechanics, , December 17-21, 2010.
3. Md. Alaudddin, Md. Abdul Hasib, Md. Kamrul Islam, Khandkar Aftab Hossain, "Mixed Convective Heat Transfer from a Heated Object in an Enclosure," International Conference on Mechanical, Industrial and Energy Engineering, , December 23-24, 2010.
2. Abdullah Al-Faruk, Md. Abdul Hasib, Naseem Ahmed, "Optimization of Process Parameters in MIG Welding using Analytical Hierarchy Process," International Conference on Mechanical, Industrial and Energy Engineering, , December 23-24, 2010.
1. Md. Abdul Hasib, Abdullah Al-Faruk, Naseem Ahmed, "Mist Application of Cutting Fluid in Milling Machine," International Conference on Mechanical, Industrial and Energy Engineering, , December 23-24, 2010.

Education

Doctor of Philosophy in Mechanical Engineering
Nagasaki University, Japan
Thesis: Versatile Analysis of Defects in 3D Solid based on Body Force Method

Remarks:
Master of Science in Mechanical Engineering
Nagasaki University, Japan
Thesis: Versatile Stress Analysis of 3D Crack

Remarks:
JSME Award, Miura Award
Bachelor of Science in Mechanical Engineering
Khulna University of Engineering & Technology (KUET), 911爆料
Thesis: Mist Application of Cutting Fluid

Remarks: 2nd

Scholarship and Award

Best paper award Dec 21, 2020
6th International Conference on Mechanical, Industrial & Energy Engineering, Khulna, 911爆料 (December 19-21, 2020)
Excellent paper award Sep 02, 2018
Society of Physical Fitness, Nutrition and Immunology, Sendai, Japan (September 2, 2018)
Junior School Merit Scholarship
Pirijpur High School, Godagari, Rajshahi (1999-2000)
University Merit Scholarship
Khulna University of Engineering & Technology (KUET), 911爆料
MEXT Scholarship as a Postgraduate Student
Ministry of Education, Culture, Sports, Science and Technology, Japan (April 2012 -March 2017)
MEXT Scholarship as a Research Student
Ministry of Education, Culture, Sports, Science and Technology, Japan (Oct. 2011-March, 2012)
Miyura Award for recognizing outstanding graduates from mechanical engineering schools in Japan
Japan Society of Mechanical Engineers (JSME), Japan (March 25, 2014)
Dean鈥檚 award
Graduate School of Engineering, Nagasaki University, Japan (March 25, 2014)

Research

Academic Experience

Lecturer
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET) Oct 12, 2008 to Dec 31, 2011
Assistant Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET) Jan 01, 2012 to Dec 16, 2020
Associate Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET) Dec 17, 2020 to May 07, 2022
Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET) May 08, 2022 to Jan 01, 1970

Administrative Experience

Head
Department of Textile Engineering Oct 22, 2020 to Oct 08, 2024

Course Conduct

Undergraduate:

Solid Mechanics and Machine Design

Engineering Mechanics

Numerical Computation for Mechanical Engineers

Computer Programming

Operations Research

Fatigue, Creep & Fracture

Postgraduate:

Fatigue, Creep, and Fracture

Advanced Numerical Analysis

Operations Research

Linear Programming

911爆料