Dr. Abdullah Al-Faruk

Bio

Publication

International Journal

16. Shadman Sakib, Abdullah Al-Faruk, "Flow and Thermal Characteristics Analysis of Plate Finned Tube and Annular-Finned Tube Heat Exchangers for In-Line and Staggered Configurations," Mechanics and Mechanical Engineering, Lodz University of Technology, vol. 22, no: 4, pp. 1407-1417, 2018, doi: https://doi.org/10.2478/mme-2018-0110
15. Kamrul Hasan Rahi, Golam Md. Mortuza, Abdullah Al-Faruk, "," Journal of Mechanical and Energy Engineering, Koszalin University of Technology, vol. 2(42), no: 2, pp. 147-154, 2018, doi: https://doi.org/10.30464/jmee.2018.2.2.147
14. Md. Monirul Islam Khan, Abdullah Al-Faruk, "Comparative Analysis of Aerodynamic Characteristics of Rectangular and Curved Leading Edge Wing Planforms," American Journal of Engineering Research , , vol. 7, no: 5, pp. 281-291, 2018.
13. Abdullah Al-Faruk, Ahmad Sharifian, "," Energy Procedia, Elsevier Ltd, vol. 110, pp. 235-242, 2017, doi: https://doi.org/10.1016/j.egypro.2017.03.133
12. Abdullah Al-Faruk, Ahmad Sharifian, "," Alexandria Engineering Journal, Elsevier B.V., vol. 55, no: 3, pp. 2055-2064, 2016, doi: http://dx.doi.org/10.1016/j.aej.2016.07.005
11. A. Al-Faruk, A. S. Sharifian, "," International Journal of Automotive and Mechanical Engineering, Universiti Malaysia Pahang Publishing, vol. 12, pp. 2929-2943, 2015, doi: http://dx.doi.org/10.15282/ijame.12.2015.10.0245
10. M. R. Halder, A. Al-Faruk, M. H. Nabi, "Effects of Flow and Atomizer Parameters on the Spray Cone Angle in a Hollow Cone Swirl Atomizer," Journal of Engineering Science, Faculty of Civil Engineering, KUET, vol. 2, no: 1 & 2, pp. 1-9, 2011.
9. A. Al-Faruk, N. Ahmed, M. A. Haque, S. A. Mahmud, "Design of a Knowledge-Based Manufacturing Flow Shop Sequencing System using Fuzzy Logic," International Journal of Engineering & Applied Sciences, Akdeniz University, vol. 3, no: 3, pp. 1-14, 2011.
8. Abdullah Al-Faruk, Md. Abdul Hasib, Naseem Ahmed, Utpal Kumar Das, "Prediction of Weld Bead Geometry and Penetration in Electric Arc Welding using Artificial Neural Networks," International Journal of Mechanical & Mechatronics Engineering, IJENS, vol. 10, no: 4, pp. 19-24, 2010.
7. S. M. Enamul Hoque Yasin, Md Ashraful Islam, Abdullah Al-Faruk, "," Arabian Journal for Science and Engineering, Springer, 2025, doi: https://doi.org/10.1007/s13369-025-10546-7
6. Md. Zadid Iqbal, Abdullah Al-Faruk, Md. Ashraful Islam, "," Journal of Engineering Advancements, SciEn Publishing Group, vol. 06, no: 01, pp. 22-30, 2025, doi: https://doi.org/10.38032/jea.2025.01.004
5. Md. Abid Hossain, Abdullah Al-Faruk, "," Advancement in Mechanical Engineering and Technology, HBRP Publication, vol. 8, no: 3, pp. 8-31, 2025, doi: https://doi.org/10.5281/zenodo.17008519
4. Md. Mushfiur Rahman, Ahmed Abrar Shayor, Abdullah Al-Faruk, Md. Touhidur Rahman Evan, "," Results in Engineering, Elsevier B.V., vol. 25 (2025) 104533, 2025, doi: https://doi.org/10.1016/j.rineng.2025.104533
3. Md. Shahadat Hossan Sayem, Md. Mainuddin Sagar, Md. Rezwan Alam, Abdullah Al-Faruk, "," International Research Journal of Engineering and Technology (IRJET), , vol. 11, no: 5, pp. 1601-1622, 2024.
2. Md. Zulkarna-En, Md. Ashraful Islam, Abdullah Al-Faruk, Md Rhyhanul Islam Pranto, A.N.M. Mominul Islam Mukut, "," International Journal of Automotive and Mechanical Engineering, Universiti Malaysia Pahang Publishing, vol. 20, no: 4, pp. 10821-37, 2023, doi: https://doi.org/10.15282/ijame.20.4.2023.02.0837
1. Md Abdul Hasib, Abdullah Al-Faruk, Naseem Ahmed, "," International Journal of Mechanical & Mechatronics Engineering, IJENS, vol. 10, no: 1, pp. 13-18, 2010.

International Conference

18. Syed Ibn Mohsin and Abdullah Al-Faruk, "Numerical Simulation of an Oscillating Water Column Device and Investigating the Effects of Lip Submergence on Velocity and Pressure," 13th International Conference on Mechanical Engineering, AIP Conference Proceedings, pp. 040004-1-6, 25 February 2021.
17. Md. Shahadat Hossan Sayem and Abdullah Al-Faruk, "Effect of Cant Angles on the Aerodynamic Performances of an Airplane Wing with Blended Type Winglet: Numerical Analysis," 6th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 19-21 December 2020.
16. Md. Tanvir Khan, Sharif Mujahidul Islam, Mohammad Ilias Inam and Abdullah Al-Faruk, "Effect of Dynamic Stall on the Flow Characteristics of a Darrieus Wind Turbine Blade at Low Wind Speed: A Numerical Approach," 6th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 19-21 December 2020.
15. Rahul Dev Paul, Abdullah Al-Faruk and Pranto Karua, "A Numerical Study on the Drag Reduction of Sedan Car using Vortex Generator," 6th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 19-21 December 2020.
14. Md. Mahmudul Hasan, Abdullah Al-Faruk, "Numerical Study on the effect of Mach Number and Angle of Attack on Shock Wave Formation in Transonic Regime," International Conference Mechanical Engineering and Renewable Energy , CUET, .
13. Md. Tanvir Khan, Mohammad Ilias Inam, Abdullah Al-Faruk, "CFD Analysis of a Floating Offshore Vertical Axis Wind Turbine," 1st International Conference on Sustainability in Natural and Built Environment , GCSTMR, 19-22 Jan 2019.
12. Nashidul Islam, Md. Mamun Islam, Mohammad Mashud, Abdullah Al Faruk, "Experimental Study on NACA 2415 Airfoil with Rotating Cylinder at Leading Edge," 5th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 23-24 December, 2018.
11. Md. Tanvir Khan, Mohammad Ilias Inam, Abdullah Al-Faruk, "Effect of Tip Speed Ratio on the Flow Characteristics of Single-bladed Darrieus Wind Turbine," 5th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 23-24 December, 2018.
10. Md. Tanvir Khan, Mohammad Ilias Inam, Abdullah Al-Faruk, "Numerical Analysis of Flow Characteristics around a Single-bladed Darrieus Wind Turbine," International Conference on Energy & Environment, Shahjalal University of Science & Technology, 28 September 2018.
9. S. M. Tamjid Hossain, Abdullah Al-Faruk, "Analysis of Simple and Cantilever Beams using MATLAB Graphical User Interfaces," 4th International Conference on Mechanical Engineering and Renewable Energy, CUET, 18-20 December, 2017.
8. Abdullah Al-Faruk, Ahmad Sharifian, Andrew P. Wandel, "CFD Study of Detailed Flow Field and Performance of Swirling Savonius Wind Turbine," 11th International Conference on Mechanical Engineering, Department of Mechanical Engineering, BUET, 2015.
7. A. Al-Faruk, A. Sharifian, "Influence of Blade Overlap and Blade Angle on the Aerodynamic Coefficients in Vertical Axis Swirling type Savonius Wind Turbine," 19th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, 8-11 December 2014.
6. R.S. Al-Atresh, S.A. Sharifian, A. Al-Faruk, "The effect of inlet velocity and temperature on the strength of the swirling induced by a spilt channel: A CFD approach," 18th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, 3-7 December 2012.
5. A. Al-Faruk, A. S. Sharifian, S. Al-Atresh, "Numerical Investigation of Performance of a New Type of Savonius Turbine," 18th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, 3-7 December 2012.
4. Md. Abdullah Al Bari, Abdullah Al-Faruk, M.H. Nabi, Mihir Ranjan Halder, "Effects of Flow and Atomizer Parameters on the Spray Cone Angle in a Hollow Cone Swirl Atomizer," International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 23-24 December, 2010.
3. Abdullah Al-Faruk, Md. Abdullah Al Bari, Mohammed Shaheed, Abdullah Al Jubayer, Mihir Ranjan Halder, "Catalytic Upgrading of Vegetable Oil," International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 23-24 December, 2010.
2. Abdullah Al-Faruk, Md. Abdul Hasib, Naseem Ahmed, "Optimization of Process Parameters in MIG Welding using Analytical Hierarchy Process," International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 23-24 December, 2010.
1. Md. Abdul Hasib, Abdullah Al-Faruk, Naseem Ahmed, "Mist Application of Cutting Fluid in Milling Machine," International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, KUET, 23-24 December, 2010.

National Conference

1. Abdullah Al-Faruk, Ahmad Sharifian, "Angular Velocity of a Combined Unloaded Savonius Turbine with a Vortex Inducing Chamber - a CFD Approach," Southern Regional Engineering Conference, Engineers Australia, September 2012.

Education

Scholarship and Award

Research

Academic Experience

Course Conduct

Roll No Student Name Project/Thesis Title Year 1105017 Md. Al-Mahmud Rana Study of Aerodynamic Characteristics of 2D NACA 4412 Airfoil 2016 1205038 Kamrul Hasan Rahi Study on the effects of Reynolds number on square lid driven cavity 2017 1205040 S.M. Rasheduzzaman Study on the Effect of Reynolds Number for 2-D NACA 4412 Airfoil Model Using Different Turbulence Model 2017 1205046 MD. Mahidur Rahman Infrared Based Automatic Car Parking System 2017 1205063 Md. Monirul Islam Khan Numerical analysis of the Performance of NACA 2412 Airfoil with Curved Leading Edge Planform 2017 1305083 Md. Shariful Islam Design and fabrication of single acting reciprocating water pumping system using scotch yoke mechanism 2018 1305103 Nashidul Islam Experimental Study of NACA 2415 Airfoil with Leading Edge Rotating Cylinder 2018 1405025 Rana Ahmad CFD Multiphase Modelling of Gas Mixing in an Anaerobic Digester 2019 1405064 Jahirul Islam Modelling of Non-Newtonian Fluid Flow in Anaerobic Digesters 2019 1405065 Rudro Pahlowan Design, Construction and Performance Test of a Crankshaft Operated Multiblade Power Hacksaw 2019 1405092 Syed Ibn Mohsin Numerical Simulation of an Oscillating Water Column Device Using ANSYS 2019 1505043 Md. Shahadat Hossan Sayem Numerical Analysis of Aerodynamic Characteristics of Aeroplane Wing with Winglets 2020

Supervision

Student Corner

Lab report writing instruction ME 1210 Sessional on Fluid Mechanics I

Lecture 1 & 2 ME 2113 Fluid Mechanics I Course Material

911爆料