Dr. Md. Ashraful Islam

Bio

Dr. Md. Ashraful Islam is a professor in the Department of Mechanical Engineering. He received his PhD in Aerospace Engineering from the University of New South Wales (UNSW) Australia in 2018. He obtained a Master's in Aerospace Engineering from the Institute of Aeronautics and Astronautics at National Cheng Kung University (NCKU), Taiwan, and a Bachelor of Science in Mechanical Engineering from Rajshahi University of Engineering and Technology (RUET), 911ｱｬﾁﾏ.

The major research areas of Dr. Islam are Aerospace Engineering, Aircraft Structure and Materials: Bio and nature inspire materials, Metamaterials, Additive Manufacturing, UAV Design: VTOL UAV, micro flying robot, Drone application in sustainable resource management and industry 4.0); Computational Mechanics: CFD and FEA of advanced systems. Interested students and academics are most welcome to collaborate on research. Thanks.

Publication

Book Chapter

4. A. D. Brown, W. D Hutchison, M.A. Islam, MA Kader, JP Escobedo, PJ Hazell, "Effects of Thermal Processing on Closed-Cell Aluminium Foams," Effects of Thermal Processing on Closed-Cell Aluminium Foams, Characterisation of Minerals, Metals, and Materials TMS-2017, 2017.
3. M.A. Islam, M. A . Kader, A. D. Brown, P. J. Hazell, J. P. Escobedo, M. Saadatfar, "Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams Under Drop Weight Impact," Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams Under Drop Weight Impact, Characterisation of Minerals, Metals, and Materials, TMS 2017, 2017.
2. M. A. Kader, P. J. Hazell, M. Saadatfar, M. A. Islam, A. D. Brown, J. P. Escobedo, "The Influence of Microstructure on the Collapse Mechanisms and Specific Energy Absorption Capacity of Aluminium Alloy Foams," The Influence of Microstructure on the Collapse Mechanisms and Specific Energy Absorption Capacity of Aluminium Alloy Foams, Presented in Characterisation of Minerals, Metals, and Materials, TMS 147th Annual Meeting and Exhibitio, 2018.
1. M. A. Islam, M. A. Kader, P. J. Hazell, J.P.Escobedo, A.D. Brown and M. Saadatfar,, "Characterization of Minerals, Metals, and Ma," Characterization of Minerals, Metals, and Ma, TMS, 2018.

International Journal

42. Jasim Ahmed Chowdhury, Md Ashraful Islam, Abdullah Al Bari, Arup Kumar Debnath, "Analysis of mechanical properties of fly ash and boiler slag integrated geopolymer composites," Sustainable Structures, Elsevier BV, vol. 5, no: 2, 2025, doi: DOI: 10.54113/j.sust.2025.000073
41. Md. Hanzala Khan, Md Ashraful Islam, Md Abdul Kader, Dipayan Mondal, "Dynamic response of reinforced concrete slabs under blast loading: A numerical approach," Structural Concrete, Springer Nature, vol. 26, no: 2, 2025, doi: https://doi.org/10.1002/suco.70072
40. Md. Zadid Iqbal, Abdullah Al-Faruk, Md. Ashraful Islam, "Experimental Analysis of Aerodynamic Characteristics of NACA 0012 Wing Model with Multiple Winglets," Journal of Engineering Advancements, , vol. 6, no: 1, 2025, doi: https://doi.org/10.38032/jea.2025.01.004
39. Md Seam Shaikh, Md Shahriar Shajib, Md Abdul Kader, Dipayan Mondal, Md. Ashraful Islam, "Effect of Preheating on Microstructure and Mechanical Properties in Mild Steel Arc Weld Joints," International Journal of Automotive and Mechanical Engineering, , vol. 22, no: 1, 2025, doi: https://doi.org/10.15282/ijame.22.1.2025.14.0931
38. Md Abdul Kader, Md Abdul Wares, Md Ashraful Islam, Paul Jonathan Hazell, Juan Pablo Escobedo, Mohammad Saadatfar, "Dynamic Deformation Mechanisms and Mechanical Properties of Additively Manufactured Closed-Cell Foams of Various Topologies," Advanced Engineering Materials, Wiley Advanced, vol. 27, no: 9, 2025, doi: https://doi.org/10.1002/adem.202401892
37. Tasnuva Tabashhum choudhuri, Imtiaz Masuk, Pronoy Deb, Nurul Islam, Md. Ashraful Islam, "Thermo-mechanical stress analysis and critical condition estimation in lithium lanthanum niobate (LiLaNbO) thin electrolyte plate of all-solid-state battery," Applications in Engineering Science, Elsevier BV, vol. 21, 2025, doi: https://doi.org/10.1016/j.apples.2025.100206
36. Shah Mohammad Azam Rishad, Md Ashraful Islam, Md Shahidul Islam, "Analysis of stress distribution of CFRP bonded joints: A study of numerical and machine learning approach," Heliyon, Elsevier BV, vol. 11, no: 3, 2025, doi: https://doi.org/10.1016/j.heliyon.2025.e42440
35. Md. Ahtesham Akhter, Dipayan Mondal, Arup Kumar Debnath, Md. Ashraful Islam, Md. Sanaul Rabbi, "Evaluation of Mechanical and Thermal Performance of Jute and Coconut Fiber-Reinforced Epoxy Composites with Rice Husk Ash for Wall Insulation Applications," Heliyon, Elsevier BV, vol. 11, no: 13, 2025, doi: https://doi.org/10.1016/j.heliyon.2025.e42211
34. Palash Das, Dipayan Mondal, Md. Ashraful Islam, Md. Abdullah Al Mohotadi, Prokash Chandra Roy, "Analytical finite-integral-transform and gradient-enhanced machine learning approach for thermoelastic analysis of FGM spherical structures with arbitrary properties," Theoretical and Applied Mechanics Letters, Elsevier BV, vol. 15, no: 3, 2025, doi: https://doi.org/10.1016/j.taml.2025.100576
33. Jannatul Ferdush, Md. Al Amin Bhuiyan Shuvo, Shahriar Haque Badhan, Jairul Islam, Md Ashraful Islam, Md. Mahadi Hasan, "Structural, Optical, and Electronic Properties Analysis of Praseodymium Doped ZnO: Insights from Density Functional Theory with GGA+U Approach," AIUB Journal of Science and Engineering, AIUB, vol. 23, no: 3, 2024, doi: https://doi.org/10.53799/ajse.v23i3.1309
32. Md. Mahadi Hasan, Md Ashraful Islam, Tareq Hasan, "Analysis of Jute-Glass Fiber Reinforced Epoxy Hybrid Composite," Heliyon, CelPress, vol. 10, 2024, doi: https://doi.org/10.1016/j.heliyon.2024.e40924
31. Tamzid Shaharier, Dipayan Mondal, Md. Ashraful Islam, Md. Abdul Hasib, Md. Ashraful Islam, "Effects of gas-liquid flow and dehumidification performance of a liquid desiccant dehumidifier: A numerical approach for vertical smooth & rough, and inclined rough plates," Journal of Thermal Engineering, YTU Press, vol. 10, no: 6, 2024, doi: https://dx.doi.org/10.14744/thermal.0000883
30. Arafater Rahman, Mohammad Abdul Wadud, Mohammad Abdul Hasib, Mohammad Ashraful Islam, "Sustainable Bicycle Crank Arm Selection Using Life Cycle Analysis Under Typical Cycling Pedal Forces," Engineering Proceedings, MDPI, vol. 76, no: 1, 2024, doi: https://doi.org/10.3390/engproc2024076043
29. Md. Miraj Arefin, Dipayan Mondal, Md. Ashraful Islam, "," Energy Conversion and Management: X, Elsevier BV, vol. 24, 2024.
28. P. Das, M. A. Islam, M. A. Hasib, "Corrective and New Research Frontier of Dual-Phase -Lag Non-Fourier Heat Conduction in Functionally Graded Cylindrical Materials with Bi-directional Property Variations," International Journal of Thermofluids, Elsevier BV, vol. 24, 2024, doi: https://doi.org/10.1016/j.ijft.2024.100861
27. Shah Mohammad Azam Rishad , Md. Shahidul Islam , Md. Ashraful Islam, "Evaluation of stress distributions in trimaterial bonded joints with nano-resin adhesive using machine learning models," Results in Materials, Elsevier BV, vol. 23, 2024, doi: https://doi.org/10.1016/j.rinma.2024.100618
26. Palash Das, Dipayan Mondal, Md. AShraful Islam, Masuda Afroj Lily, "Thermodynamic performance evaluation of a solar powered Organic Rankine cycle (ORC) and dual cascading vapor compression cycle (DCVCC): Power generation and cooling effect," Energy Conversion and Management: X, , vol. 23, 2024, doi: https://doi.org/10.1016/j.ecmx.2024.100662
25. 11. Lutfur Islam, Dipayan Mondal, Md. Ashraful Islam, Palash Das, "Effects of Heat Transfer Characteristics of R32 and R1234yf with Al2O3 Nanoparticle through U-Bend Tube Evaporator," Journal of Engineering, Wiley, no: 1, 2024, doi: https://doi.org/10.1155/2024/9991809
24. P. Das, A. Benslimane, M.A. Islam, A.A. Siddiquei, M.M. Rahman, M. M. Adil,, "Finite Element Analysis (FEA) of a generalized rotating FGM pressure vessel subjected to thermo-mechanical loadings: Effect of Poisson ratio and others inhomogeneity parameters.," Composite Structures, Elsevier BV, vol. 10, no: 11, 2024, doi: https://doi.org/10.1016/j.heliyon.2024.e31833
23. P. Das, A. Benslimane, M.A. Islam*, D. Mondal, M. S. Nazim, "A heterogeneous thermo-mechanically loaded rotating FGM thick cylindrical pressure vessels under parabolic changing properties: analytical and finite element analysis (FEA)," Heliyon, Elsevier BV, vol. 10, no: 4, 2024, doi: https://doi.org/10.1016/j.heliyon.2024.e25969
22. Chen Wang, Xiaoguang Ma, Linan Ma, Zhengyi Jiang, Mahadi Hasan, Md Ashraful Islam, Ajab Khan Kasi, Jingwei Zhao, "A study on the microstructural evolution of copper/aluminum composite strips fabricated by micro flexible rolling," Materials Characterization, Elsevier BV, vol. 205, 2023, doi: https://doi.org/10.1016/j.matchar.2023.113315
21. P. Das, M.A. Islam, D. Mondal and M.S. Nazim, "Analytical and FEA analysis of steady heat transfer in generic FGM cylinder coated with isotropic layers under convective-radiative boundary conditions," Heliyon, Elsevier BV, vol. 10, no: 11, 2023, doi: https://doi.org/10.1016/j.heliyon.2024.e31833
20. P. Das, M.A. Islam, S. Somadder, M. A Hasib, "Analytical and FEA analysis of steady heat transfer in generic FGM cylinder coated with isotropic layers under convective-radiative boundary conditions," Archive of Applied Mechanics, Springer Nature, vol. 93, 2023, doi: https://doi.org/10.1007/s00419-023-02406-3
19. D. Chanda, M.A. Islam, "Numerical modeling of low-velocity impact on composite laminates ," MIST International Journal of Science and Technology, , 2023.
18. Md. Samiul Hasan Dudul, Mohammad Sultan Mahmud, and Md. Ashraful Islam, "," Journal of Aeronautics, Astronautics and Aviation, , vol. 55, no: 2, pp. 159-168, 2023.
17. Somnath Somadder, Palash Das, Md. Ashraful Islam, "Characteristics of stress distribution of a multi layered cylindrical pressure vessel," Journal of Mechanical and Energy Engineering, Koszalin University of Technology, pp. 1-6, 2023.
16. P. Das, M.A. Islam, S. Somadder, M.A. Hasib, "," Archive of Applied Mechanics, Springer, 2023.
15. M. Zulkarnaen, M.A. Islam, A. Al-Faruk, M.R.I. Paranto, D. Mondal, M.I. Mukut, "Numerical Analysis of Aerodynamic and Shock Wave Characteristics of Biconvex and Double-Wedge Shape Airfoils for Supersonic Flow," International Journal of Automotive and Mechanical Engineering,, , vol. 20, no: 4, 2023, doi: https://doi.org/10.15282/ijame.20.4.2023.02.0837
14. M.M. Shahriar, M.S. Parvez , M.A. Islam, S. Talapatra, "Implementation of 5S in a plastic bag manufacturing industry: A case study," Cleaner Engineering and Technology, Elsevier BV, vol. 8, 2022, doi: https://doi.org/10.1016/j.clet.2022.100488
13. A. Rahman, M. A. Hasib, M. A. Islam, I. Alam, S. Chanda, "," Journal of Natural Fibers, , vol. 20, 2022.
12. Somnath Somadder, Palash Das , Md. Ashraful Islam, Md. Abdul Hasib, "Numerical Investigation of Interfacial Stress Distribution in Adhesive-Bonded Joints for Different Adhesive Materials," International Journal Of Engineering & Applied Sciences, , vol. 14, no: 2, 2022, doi: 10.24107/ijeas.1117544
11. M. Hasan, M.A. Islam, Z. Huang, J. Zhao, Z. Jiang, "," Materials Science and Technology, , 2022.
10. M.A. Islam, M.A. Hasib, M. Hasan, S. Talapatra, "Deformation Behaviour and Mechanical Response of Closed-cell Cellular Materials under Projectile Impact Using Various Shapes Impactors," International Journal of Automotive and Mechanical Engineering, , vol. 19, no: 3, 2022.
9. P. Das, M.A. Islam, S. Somadder, M.A. Hasib, "," Materials Today Communications , , vol. 22, 2022.
8. M. A. Kader, P. J. Hazell, M. A. Islam, S. Ahmed, M.M. Hossain, J.P. Escobedo, M. Saadatfar, "," Materials Science and Engineering A, , vol. 818, pp. 141379, 2021, doi: https://doi.org/10.1016/j.msea.2021.141379
7. M.A. Islam, M.A. Kader, P.J. Hazell, M.A. Islam, J.P. Escobedo, A.D. Brown, M. Saadatfar, "," Materials Design, , vol. 191, pp. 108599, 2020.
6. M.A. Islam; M.A. Kader, P.J. Hazell, A.D. Brown; M. Saadatfar, M.Z. Quadir, S. Xu, D. Ruan, "," International Journal of Impact Engineering, , vol. 114, pp. 111-122, 2018.
5. M. A. Kader, M. A. Islam, M. Saadatfar, P. J. Hazell, A. D. Brown, S. Ahmed and J. P. Escobedo, "," Materials and Design, , vol. 118, pp. 11-21, 2017, doi: https://doi.org/10.1016/j.matdes.2017.01.011
4. M.A. Islam, M.A. Kader, P.J. Hazell, A.D. Brown; M. Saadatfar, M.Z. Quadir, J. P. Escobedo, "," Materials Science and Engineering A, , vol. 201, pp. 245 -256, 2016.
3. M. A Kader, M. A. Islam, P. J. Hazell, J. P. Escobedo, M. Saadatfar, A.D. Brown, G.J. Appleby-Thomas, "," International Journal of Impact Engineering,, , vol. 96, pp. 78-88, 2016.
2. M.A. Kader, M. A. Islam, P.J Hazell, J.P. Escobedo, M. Saadatfar, A.D. Brown, "," Journal of Applied Mechanics and Materials, , vol. 846, pp. 133-1138, 2016.
1. M. A. Islam, P. J. Hazell, J. P. Escobedo, M. Saadatfar, "In-situ quasistatic compression and microstructural characterisation of aluminum foams of different cell topology," International Journal of Aerospace and Mechanical Engineering, , vol. 8, pp. 1285-1290, 2014.

International Conference

25. Himel Roy, Md. Ashraful Islam, "Active space debris collection using harpoon technology of various tip shapes," 1st IUT International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE), Islamic University of Technology (IUT), 21-22 July, 2023.
24. Meftahul Mahmud, Md. Ashraful Islam, "Design and Motion Analysis of Four-Legged Walking Robot using Theo Jansen Mechanism," 7th International Conference on Mechanical, Industrial and Energy Engineering, Khulna University of Engineering and Technology, Dec 2022.
23. Raydah Nudrat Turna, Md. Abdul Hasib, Md. Ashraful Islam, Nadim Hyder, "Effect of Length of Composite on CFRP Strengthened Steel Beam-Column Joints under Cyclic Load," 7th International Conference on Mechanical, Industrial and Energy Engineering, Khulna University of Engineering and Technology, Dec 2022.
22. G. Rabbi, M . A. Hasib, A. K. Debnath, M. A. Islam, "Fracture Analysis of Adhesively Bonded Joints as a Function of Temperature," International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE -2022), , 2022.
21. M. A. Islam, Md. Zulkarna-En, Md. A. Hasib and M.I. Mukut, "Numerical Simulation of Aerodynamic Performance of Biconvex Supersonic Airfoil," International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE-2022), , 2022.
20. M.A. Islam, "Mechanical Behaviour of Closed-cell Cellular Composite Under Drop Weight Impacts," International Conference on Mechanical Engineering and Renewable Energy, ICMERE 2021, , 2021.
19. M.A. Islam, M. Hasan, S.M. Mahbub, H. Roy, "Finite Element Prediction of Deformation of Closed-cell Cellular Materials for Sustainable Materials Characterisation," International Conference on Science & Contemporary Technologies (ICSCT), , pp. 1-5, 2021.
18. C. Gunturi, J.P. Escobedo, and M.A. Islam, "Comparative Analysis of Dynamic Impact Tests Between the Charpy V-Notch Test and the Drop Tower Test," TMS 2019, , pp. 553-560, 2019.
17. M. A. Kader, P. J. Hazell, M. Saadatfar, M. A. Islam, A. D. Brown, J. P. Escobedo, "The Influence of Microstructure on the Collapse Mechanisms and Specific Energy Absorption Capacity of Aluminium Alloy Foams," haracterisation of Minerals, Metals, and Materials, TMS 147th Annual Meeting and Exhibition, , pp. 11-15 , March, 2018.
16. M.A. Kader, M.A. Islam, A. D. Brown, P.J. Hazell, M. Saadatfar, J.P. Escobedo, "Deformation mechanisms of closed cell-aluminium foams during drop weight impact," TMS 2017, , pp. 233-239, 2017.
15. M.A. Islam, M. A. Kader, AD Brown, PJ Hazel.l, J. P Escobedo, M. Saadatfar, "Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams Under Drop Weight Impact," TMS 2017, , pp. 2017-2024, 2017.
14. AD Brown, WD Hutchison, MA Islam, MA Kader, JP Escobedo, PJ Hazell, "Effects of Thermal Processing on Closed-Cell Aluminium Foams," TMS 2017, , pp. 217-224, .
13. M.A. Kader, M. A. Islam, M. Saadatfar , M. Turner, P.J. Hazell, A.D. Brown and J.P. Escobedo, "Computed tomography based structural analysis and computational modelling to investigate deformation mechanism in aluminium foams during low-velocity impact," VII European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS Congress 2016, , 2016.
12. M.A. Islam, M.A. Kader, P.J. Hazell, J.P. Escobedo and G.J. Appleby-Thomas, "Dynamic Crushing Response of Closed-cell Aluminium Foam at Variable Strain Rates," 19th Biennial APS Conference on Shock Compression of Condensed Matter, APS SCCM-2015, , June 14-19,2015.
11. M.A. Kader, M.A. Islam, P.J. Hazell, J.P. Escobedo and M. Saadatfar, "Numerical Modelling of Closed-cell Aluminium Foam Under Dynamic Loading," 19th Biennial APS Conference on Shock Compression of Condensed Matter, APS SCCM-2015, , June 14-19,2015.
10. M. A. Kader, M. A. Islam, M. Saadatfar, P. J. Hazell, A. D. Brown,, S. Ahmed, M. Turner, J. P.Escobedo, "Pore scale collapse mechanism of closed-cell aluminium foams during quasi-static compression," 3rd International Conference on Tomography of Materials and Structures, , 26-30 June 2017.
9. M.A. Islam, J.P. Escobedo, P.J. Hazell, G.J. Appleby-Thomas and M.Z. Quadir, "Characterisation of Closed-cell Aluminium Foams Subjected to Compressive Loading," proceedings of Characterisation of Minerals, Metals and Materials, 2015 TMS Annual Meeting & Exhibition, , 2015.
8. M.A. Islam, M.R. Islam, G.M. H. Hasan, "Design and Numerical analysis of vertical axis wind turbine for low wind velocity," Proceedings of 15th Annual Paper Meet(APM), , 2013.
7. M.N. Uddin, M.A. Islam, M. Mashud, "Fracture properties of thin papers made from grapheme oxide," 2nd International Conference on Mechanical Engineering and Renewable Energy(ICMERE), , 2013.
6. M.A. Islam, C.E. Lin, S. M. Liang, "Design of a Finite Amplitude Electromagnetic Shock Wave Generator for Biomedical Application ," International Conference on Engineering Research,Innovation and Education, ICERIE 2013, , 2013.
5. M. A. Islam, Chin E. Lin, "Development of a Finite Amplitude Liquid Shock Wave Generator by Electromagnetic Coil Repulsion," Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2012), , 2012.
4. M.A. Islam, C. Gau, "Experimental Steady state Heat Transfer characteristics through a silicon microstructured microchannel," International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2012), Department of Mechanical engineering, Khulna University of Engineering &Technology, 911ｱｬﾁﾏ, 2012.
3. M. Hasan, M. A. Islam, R. Bunchan , "A Binary Hyper Redundant Elephant Trunk like Robot controlled by Microcontroller and PLC-WINCC," International Conference on Mechanical Engineering, (ICME2011), , 2011.
2. Mahadi Hasan, Mongkol Ekpanyapong, Md Abdul Wakil, Md Ashraful Islam, Abhisesh Silwal, Jakkit Sivapornsatian, "PD controller for balancing an Inverted pendulum cart," Proceedings of the International Conference on Mechanical Engineering 2011 (ICME2011), , 2011.
1. M. A. Islam and S. Talapatra, "Design, construction and performance study of parabolic type solar collector for the generation of superheated steam," International Conference of Mechanical Engineering, Department of Mechanical engineering, 911ｱｬﾁﾏ University of Engineering and Technology, 911ｱｬﾁﾏ, 2008.

Education

PhD in Aerospace Engineering (4 years)
University of New South Wales (UNSW), Australia
Result: First class
Award
Thesis: Mechanics of Closed-cell Cellular Materials

Aerospace Structure and Materials
Remarks:
Masters in Aerospace Engineering (2)
Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan,, Taiwan
Result: First class (84.94%)
Award
Thesis: Design and Development of Electromagnetic Shock Wave Generator

Fluid Dynamics- Shockwave
Remarks:
Bachelor of Science in Mechanical Engineering (4)
Rajshahi University of Engineering and Technology (RUET), 911ｱｬﾁﾏ
Result: First class (78.28%)

Group: Mechanical Engineering(2005)
Remarks: 2nd
Thesis: Development of particulate pollutant measurement devices

Scholarship and Award

Merit-Based Scholarship from Institution of Engineers (IEB), 911ｱｬﾁﾏ (2004-2005)
NCKU Postgraduate Studentship (PGS), NCKU, Taiwan (2010-2012)
Research Assistantship, NCKU, Taiwan (2010-2011)
Graduate Teaching Assistantship, NCKU, Taiwan KS (2011-2012)
PRSS Travel Grant, UNSW, Australia (2016)
Special Research Fellowships- Travel, UNSW, Australia (2017)
University Merit Scholarships, RUET, 911ｱｬﾁﾏ
e8 Scholarship for Sustainable Energy Development ,2009
NCKU Distinguished International Student Scholarship
Best Paper Award, TMS, USA, 2017
APA Award, Australian Government, (2015-2018)
Australian Post-graduate Award by Australian Government

Research

I have research collaboration with following universities as evidenced in joint publications ﾃｯ窶堋ｧ Australian National University (ANU), Canberra, Australia ﾃｯ窶堋ｧ Sydney University (SU), Sydney, Australia ﾃｯ窶堋ｧ Swinburne University of Technology, Melbourne, Australia ﾃｯ窶堋ｧ Cranfield University of Technology, UK ﾃｯ窶堋ｧ National Cheng Kung University, Tainan, Taiwan

Academic Experience

Lecturer
Mechanical Engineering
Khulna University of Engineering and Technology, Khulna, 911ｱｬﾁﾏ
Working Area: University Teaching
Responsibility: -Supervising and examining projects and theses of undergraduate and graduate students; Performing different administrative works such as preparing undergraduate results; Designing and preparing the Lab Sheets of different undergraduate courses; Preparing the testing reports and consultancy documents -Trained and supervised students and conducted Engineering projects and theses; Configured and installed different tools/software in Mechanical Engineering laboratories.
Assistant Professor
Mechanical Engineering
Khulna University of Engineering and Technology, Khulna, 911ｱｬﾁﾏ
Working Area: University Teaching
Responsibility: ﾃｯ窶堋ｧLecturing and coordinating different undergraduate and graduate course ﾃｯ窶堋ｧSupervising projects and theses of undergraduate and graduate students ﾃｯ窶堋ｧPerforming different administrative works such as preparing undergraduate results. ﾃｯ窶堋ｧConducting research and publication ﾃｯ窶堋ｧLaboratory in charge in Applied Mechanics in the Department of Mechanical Engineering. ﾃｯ窶堋ｧWorked with faculty to maintain ABET assessment. ﾃｯ窶堋ｧConfigure and installing of different tools/software in Mechanical Engineering laboratories
Associate Professor
Mechanical Engineering
Khulna University of Engineering and Technology, Khulna 911ｱｬﾁﾏ
Responsibility: ﾃｯ窶堋ｧLecturing and coordinating different undergraduate and graduate course ﾃｯ窶堋ｧSupervising projects and theses of undergraduate and graduate students ﾃｯ窶堋ｧPerforming different administrative works such as preparing undergraduate results. ﾃｯ窶堋ｧConducting research and publication ﾃｯ窶堋ｧLaboratory in charge in Applied Mechanics in the Department of Mechanical Engineering. ﾃｯ窶堋ｧWorked with faculty to maintain ABET assessment. ﾃｯ窶堋ｧConfigure and installing of different tools/software in Mechanical Engineering laboratories
Academic Casual (Part-time)
University of New South Wales (UNSW) , Canberra, ADFA@ Canberra
Responsibility: ﾃｯ窶堋ｧpreparing the tutorial materials, preparing the PPT slides, re-designing the lectures. ﾃｯ窶堋ｧDelivering high-quality teaching as measured by studentsﾃ｢竄ｬ邃｢ feedback evaluations. ﾃｯ窶堋ｧ Instructed students in weekly labs, Materials Engineering Labs for 6 semesters. ﾃｯ窶堋ｧTaught principles and concepts of Materials Engineering to 100+ students through experiments including mechanical testing methods, metallography, microstructure analysis, and heat treatment. ﾃｯ窶堋ｧSupervised and trained students in material testing: hardness, impact, tensile, compression, fatigue, creep tests, hardenability, cold rolling, microhardness, and metallography. ﾃｯ窶堋ｧProviding consultation and assistance to the students. ﾃｯ窶堋ｧ Demonstrating the lab classes by performing physically and teaching students.
Research Assistant (Part-time)
Institute of Aeronautics and Astronautics
National Cheng Kung University, Taiwan, Tainan, Taiwan
Responsibility: ﾃｯ窶堋ｧInstallation, Maintenance and Repair of materials testing. ﾃｯ窶堋ｧTroubleshooting using service manuals, computerized diagnostics & general technical experience ﾃｯ窶堋ｧData requisition from complex experimentation for materials testing. ﾃｯ窶堋ｧTest set up for various undergraduate studentsﾃ｢竄ｬ邃｢ projects. ﾃｯ窶堋ｧSupervised and trained students on lab test setup. ﾃｯ窶堋ｧLed discussion sessions on experimental results and graded lab reports ﾃｯ窶堋ｧ.Develop & maintain key relationships with significant other laboratory personnel
Assistant Professor
Mechanical Engineering
Khulna University of Engineering and Technology, Khulna, 911ｱｬﾁﾏ
Working Area: University Teaching
Responsibility: ﾃｯ窶堋ｧSupervising and examining projects and theses of undergraduate and graduate students ﾃｯ窶堋ｧPerforming different administrative works such as preparing undergraduate results. ﾃｯ窶堋ｧDesigning and preparing the Lab Sheets of different undergraduate courses ﾃｯ窶堋ｧPreparing the testing reports and consultancy documents ﾃｯ窶堋ｧTrained and supervised students and conducted Engineering projects and theses Configured and installed different tools/software in Mechanical Engineering laboratories
Professor
Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna Aug 21, 2021 to Jan 01, 1970

Professional Membership

Members
Institute of Engineers 911ｱｬﾁﾏ (IEB)
Former Graduate Members of Engineers Australia
Member
IEEE

Course Conduct

Supervision

Project/ Thesis( Current): Project 1. Active removal of Space derbies Student: Himel Roy (Postgraduate Student) Project 2.Drag reduction of Hypersonic flow using Energy Deposition Student: Mukit( Undergraduate Student) Project 3:Numerical simulation of Functional Graded Metal Matrix Composite ad Aerospace Structure Student: Yasin (Undergraduate)

Undergraduate ﾃｯ窶堋ｧ ME-4019 ﾃ｢竄ｬ窶� Aerodynamics (Current semester) ﾃｯ窶堋ｧ ME-3111 ﾃ｢竄ｬ窶� Fluid Mechanics and Machinery ﾃｯ窶堋ｧ ME 4021- Introduction to Flight Dynamics ﾃｯ窶堋ｧ ME- 4021- Flight Dynamics ﾃｯ窶堋ｧ ME 3221 ﾃ｢竄ｬ窶� Numerical computation for Mechanical Engineer ﾃｯ窶堋ｧ ME 3209 - Finite Element Analysis ﾃｯ窶堋ｧ ME- 3205 -Heat Transfer-II ﾃｯ窶堋ｧ MSE 2120 Computer Aided Drawing ﾃｯ窶堋ｧ ME -2221 Computer Programming Graduate ﾃｯ窶堋ｧ ME 6209- Advanced Aerodynamics ( Current semester) ﾃｯ窶堋ｧ ME-6403 ﾃ｢竄ｬ窶� Machine Computation ﾃｯ窶堋ｧ ME-6404 - Advanced Numerical Analysis ﾃｯ窶堋ｧ ME 3209 - Finite Element Analysis ﾃｯ窶堋ｧ ME- 6409 ﾃ｢竄ｬ窶� Advanced Mathematics

911ｱｬﾁﾏ