911爆料

Department of Mechanical Engineering

Avatar

Dr. Dipayan Mondal

Professor
Address: Dept. of Mechanical Engineering, ME Building, Room No. ME 303, KUET, Khulna, 911爆料. Ext.: 445
[email protected] , [email protected]
Research Interest: Heat Transfer & Fluid Flow, HVAC & Ref. System, Low GWP Refrigerants, Thermal & Thermo-Fluids, Composites for Thermal Insulation, Renewable Energy for Cooling Coupled with GSHP/Es, and Energy Harvesting.

Print Profile

Bio

Welcome to visit my webpage. Hi, This is Prof. Dr. Dipayan Mondal from Khulna University of Engineering & Technology (KUET), Khulna, 911爆料. I am very pleased to introduce myself as a Faculty of Mechanical Engineering of KUET with the help of Almighty GOD. Currently, I am serving as a Professor in the Department of Mechanical Engineering at Khulna University of Engineering and Technology (KUET). I completed my PhD degree from Saga University, Japan. I completed both of my B.Sc. Eng. (ME) and M.Sc. Eng.(ME) degree in Mechanical Engineering from KUET. After completing my B.Sc. Eng. (ME), I had joined as a Maintenance Engineer at Silkways Card & Printing Ltd, Dhaka, 911爆料. After that I had joined as a Lecturer at the department of Mechanical Engineering of Khulna University of Engineering & Technology (KUET), Khulna, 911爆料. My main goal is to secure a growth oriented and challenging career in a first-paced and a well establish position in research by utilizing technical knowledge, practical experience, interpersonal skills and teaching experience in a vow to convert thinking into an innovative creation because successful completion of research work is the missionary step of create new things, to implement new idea and finally to get a successful outcome.

My Research Interests mainly belong to:- Heat Transfer & Fluid Flow, HVAC & Ref. System, Low GWP Refrigerants, Thermal & Thermo-Fluids, Composites for Thermal Insulation, Renewable Energy for Cooling Coupled with GSHP/Es, and Energy Harvesting.

Publication

Journal
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
13.
12.
11.
10.
9.
8.
7.
6.
5.
4.
3.
2.
1.
Conference
27.
26.
25.
24.
23.
22.
21. L. Islam and D. Mondal, "Flow Boiling Heat Transfer and Flow Pattern of R32 and Al2O3-R32 in U-bend Tube Evaporator," Proceedings of the 7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023), vol. Paper ID- ICMERE2023-PI-065, 2023 .
20. M. Z. Hasan and D. Mondal, "Experimental Investigation of H-Darrieus Vertical Axis Wind Turbine Using NACA 0018 Blade Profil," Proceedings of the 7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023), CUET, Chittagong, 911爆料, vol. Paper ID- ICMERE2023-PI-064, 2023 .
19. A. R. Tuhin, D. Mondal, N. Amakusa, K. Kariya and A. Miyara, "Measurement and prediction of viscosity and thermal conductivity of R1336mzz (E)," Proceedings of the JSRAE Annual Conference, Tokyo Institute of Technology, vol. Paper number: 1467, 2021 .
18. D. Mondal, A. R. Tuhin, K. Kariya and A. Miyara Proceedings of the HFO2021 2nd IIR Conference on HFOs and Low GWP blends, Japan, 2021 , DOI:10.18462/iir.HFO.2021.1016.
17. N. Amakusa, D. Mondal, A. R. Tuhin, K. Kariya and A. Miyara, "Viscosity Measurement of R1336mzz(E) by tandem capillary tubes method," Proceedings of the HFO2021 2nd IIR Conference on HFOs and Low GWP blends, Japan, 2021 , DOI:10.18462/iir.HFO.2021.1015.
16.
15. A. R. Tuhin, D. Mondal, K. Miyoshi, K. Kariya and A. Miyara, "Kinematic Viscosity Measurement of 3,3,4,4,5,5 HFCPE," Proceedings of the 2020 JSRAE Annual Conference, 2020 .
14. K. Miyoshi, D. Mondal, A. R. Tuhin, K. Kariya and A. Miyara, "Thermal Conductivity Measurement of HFO Refrigerant R1336mzz(E)," Proceedings of the 2020 JSRAE Annual Conference, vol. (In Japanese), 2020 , pp.Page-D113.
13. Y. Hori, D. Mondal, K. Kariya and A. Miyara, "Measurement of Viscosity of Low GWP Refrigerant R1224yd(Z)," The 40th Symposium on Thermophysical Properties of Japan, vol. (In Japanese), 2019 , pp.Page-A313.
12. D. Mondal, Y. Hori, K. Kariya and A. Miyara, "Measurement of Vapor Viscosity of R1123/R32 Mixture Refrigerant by a Tandem Capillary Tubes Method," The 12th Asian Thermophysical Properties Conference (ATPC 2019), Xi鈥檃n Jiaotong University, Xi鈥檃n, CHINA, 2019 .
11. M. F. Ahasan, M. F. Hassan and a. D. Mondal, "Numerical Analysis of Energy Harvesting on a Wind Turbine Blade by Using Piezoelectric Material," International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2018), KUET, Khulna, 911爆料, vol. Paper ID-ICMIEE-18-273, 2018 .
10. M. Hasibul and D. Mondal, "Finned-tube Heat Exchanger with Circular, Elliptical & Rectangular Tubes with Water-vapor as Working Fluid," International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2018), KUET, KHULNA, 911爆料, vol. Paper ID-ICMIEE-18-201, 2018 .
9. D. Mondal and M. A. Islam, "Experimental Investigation on an Intermittent Ammonia Absorption Refrigeration System," Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE 2017), CUET, Chittagong, 911爆料, vol. Paper ID- ICMERE2017-PI-379, 2017 .
8. M. H. U. Khan, D. Mondal and S. Hoque, "Design and Construction of Oil Expeller Press with Structural Analysis of Screw with ANSYS," International Conference on Mechanical, Industrial and Energy Engineering 2016 (ICMIEE 2016), KUET, Khulna, 911爆料, vol. Paper ID-ICMIEE-PI-160363, 2016 .
7. M. R. Rahman, D. Mondal and S. M. R. K. Roomey, "Development and Performance Analysis of a solar Model Car," International Conference on Mechanical, Industrial and Energy Engineering 2016 (ICMIEE 2016), KUET, Khulna, 911爆料, vol. Paper ID-ICMIEE-PI-160335, 2016 .
6. S. M. R. K. Roomey, D. Mondal and M. R. Rahman, "Design and Performance Analysis of a Gravity Powered Lamp," International Conference on Mechanical, Industrial and Energy Engineering 2016 (ICMIEE 2016), KUET, Khulna, 911爆料, vol. Paper ID-ICMIEE-PI-160334, 2016 .
5. M. Uddin, D. Mondal and S. B. Manjur, "Design and Development of Software for Estimation of Cooling Load of Air Conditioning System," International Conference on Mechanical, Industrial and Energy Engineering 2016 (ICMIEE 2016), KUET, Khulna, 911爆料, vol. Paper ID- ICMIEE-PI-160215, 2016 .
4. D. Mondal, M. O. Ikram, M. F. Ahmed and M. N. A. Moral, "Experimental Analysis of Bend Tube Parallel Flow and Counter Flow Water to Air Heat Exchanger," Proceedings of the 7th International Mechanical Conference & 16th Annual Paper Meet (7th IMC & 16th APM, Mechanical Engineering Division (MED), IEB, vol. Paper ID-IMC-APM-HT-05, 2015 .
3. D. Mondal, M. F. Rabbi and M. N. A. Moral, "Design Construction and Performance Test of a Cross flow Heat Exchanger," Proceedings of the 15th Annual Paper Meet (15th APM), Mechanical Engineering Division (MED), IEB, vol. Paper ID-APM-HT-04, 2014 .
2. F. Ahmed, D. Mondal and M. A. Islam, "Design, Construction and Performance Test of Generator and Condenser for a Small Capacity Vapor Absorption Cooling System," Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2014), KUET, Khulna, 911爆料, vol. Paper ID-ICMIEE-PI-140254, 2014 .
1. S. Mia, M. M. Hassan, D. Mondal and M. Tabassum, "Tribological Research and Industrial Applications in 911爆料," International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2013), RUET, Rajshahi, 911爆料, vol. Paper ID-IE34-123, 2013 .

Education

Doctor of Philosophy (Ph.D.)
Saga University,Japan (October, 2018-September, 2021-) Achievement: MEXT Scholarship, JAPAN

Master of Science in Mechanical Engineering [M. Sc. Eng. (ME)]
Khulna University of Engineering & Technology (KUET),BANGLADESH (July, 2012-2014) Student Type: Part Time, Achievement: Technical Scholarship in Postgraduate level

Bachelor of Science in Mechanical Engineering [B. Sc. Eng. (ME)]
Khulna University of Engineering & Technology (KUET),BANGLADESH (February, 2007-2011) Group: Mechanical Engineering, Student Type: Regular, Merit Position: 2nd, Achievement: (1) Technical Scholarship in Undergraduate level, (2) Merit-based Scholarships awarded
Thesis Title- Design, Construction and Performance Test of a Bend Tube Water to Air Heat Exchanger; Supervisor- Professor Dr. Md. Nawser Ali Moral, Department of Mechanical Engineering, Khulna University of Engineerin

Higher Secondary Certificate (H.S.C.)
Paikgacha College,BANGLADESH (2006) Group: Science, Student Type: Regular,

Secondary School Certificate (S.S.C.)
A. B. D. P. Lata M. M. High School,BANGLADESH (2004) Group: Science, Student Type: Regular,

Scholarship and Award

  • Best Paper Award, International Conference on Mechanical Engineering and Renewable Energy (ICMERE), CUET, Chattogram, 911爆料, 2023

  • Vice-Chancellor Award in High Impact Publication, 2022

  • Basic/Applied Research Grant, UGC Funded Research Project, 2023-2024

  • Vice-Chancellor Award in High Impact Publication, 2021

  • Good Innovation Award, Summer Camp Creative Innovation Course Design Innovation Contest, National Chin-Yi University of Technology, TAIWAN, 2019

  • Outstanding Award, Summer Camp Competition, National Chin-Yi University of Technology, TAIWAN, 2019

  • Japanese Government (MEXT) Scholarship, 2018-2021

    Japanese Government (MEXT) Scholarship during PhD studies.

  • Technical & Merit Based Scholarship, 2012-2014

    Technical & Merit based scholarship through out the M.Sc. Engineering from KUET.

  • Technical & Merit Based Scholarship, 2007-2010

    Technical & Merit based scholarship through out the 4 years study of B.Sc. Engineering from KUET.

  • Divisional/ Zila Parishad Scholarship, 2004

    Divisional/ Zila Parishad Scholarship in Khulna ( Time being of HSC from Jessore Board)

  • Govt. Junior Scholarship in 2002-2004. (Jessore Board)

    A governmental scholarship for secondary school studies.

Research

  • Heat Transfer & Fluid Flow, HVAC & Ref. System, Low GWP Refrigerants, Thermal & Thermo-Fluids, Composites for Thermal Insulation, Renewable Energy for Cooling Coupled with GSHP/Es, and Energy Harvesting.

Experience

Service Records
  • Professor
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 01-Aug-2023 to Present
    Working Area: Teaching and Research

  • Associate Professor
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 08-May-2022 to 31-Jul-2023
    Working Area: Teaching and Research

  • Assistant Professor
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 01-Dec-2014 to 07-May-2022
    Working Area: Teaching and Research

  • Lecturer
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 10-Jun-2012 to 30-Nov-2014
    Working Area: Teaching and Research

  • Testing Officer and Consultant
    Department/Section: CRTS of the Department of Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 10-Jun-2012 to Present
    Working Area: As a Testing Officer and Consultant and

  • Maintenance Engineer
    Department/Section: Engineering Section
    Silkways Card & Printing Ltd. 01-Jan-2011 to 05-Jun-2012
    Working Area: Maintenance Machine and Utilities

Administrative Experience Records
  • Deputy Director, Student Welfare Center,, Khulna University of Engineering & Technology (KUET)
    From 12-Sep-2022 to 08-Oct-2023
    Department/Section: Student Welfare Center, KUET
  • Assistant Provost, Bangabandhu Sheikh Mujibur Rahman Hall,, Khulna University of Engineering & Technology (KUET)
    From 01-Jan-2014 to 22-Jan-2016
    Department/Section: Bangabandhu Sheikh Mujibur Rahman Hall, KUET
Professional Body Membership
  • Member of IEB (The Institution of Engineers, 911爆料)

    Member Type:
    Member ID: M/33356

  • Member of JSRAE, Japan Society of Refrigeration and Air-Conditioning Engineers, JAPAN

    Member Type:
    Member ID: 20465

Teaching and Supervision

#Course Conduction

Major Courses that Interested:

M.Sc Eng. (ME)

  • ME 6141/ ESE 6307: Refrigeration Systems/ Advanced Refrigeration Engineering
  • ME 6145: Thermal Environmental Engineering
  • ME 6143: Air Conditioning and Ventilation
  • ME 6147(Proposed)/ChE6101: Advanced Transport Phenomena 
  • ME 6101/ChE 6103: Advanced Thermodynamics
  • ME 6111/ ChE 6109: Advanced Heat Transfer
  • ME 6115/ ESE 6303: Advanced Convection Heat and Mass Transfer/ Advanced Heat and Mass Transfer
  • ESE 6903: Energy Management in Buildings

 

B.Sc Eng. (ME)

  • ME 4017: Refrigeration and Air Conditioning
  • ME 1105: Thermal Engineering
  • ME 2015/ ME 1229: Thermodynamics
  •  ME 4011: Advanced Thermodynamics 
  • ME 3105/ME 3205: Heat Transfer I & II
  • ME 1107/ME 3221: Manufacturing Process
  • ME 3215: Engineering Metallurgy
  • ME 4051: Operation Research
  • ME 1209/ ME 2209/ME 3109: Engineering Mechanics I, II, and III (Statics, Dynamics and Theory of Machine)
  • ME 2211/ ME 2213/ ME 2129: Mechanics of Solid
  • ME 1200/ME 1220/ME 1120: Mechanical Engineering Drawing/ Engineering Drawing
  • ME 1203/ME 2119/ME 1105: Basic/Fundamentals of Mechanical Engineering
  • ME 2215/ME 2231/ME 2115: Thermal Engineering and Heat Transfer and/or Basic Mechanics and Thermodynamics
  • ME 2121/ME 2111/ME 2131 : Engineering Mechanics/ Engineering Mechanics and Theory of Machines

 

#Supervision 

Mainly belongs to:
  • Heat Transfer and Fluid Flow
  • HVAC & Ref. System
  • Thermal & Thermo-Fluids
  • Transport-Thernodynamics Properties (Refrigerants and Materials)
  • Energy Harvesting and its Environmental Impacts
#Course Supervision

Mainly belongs to

(1) Heat Transfer and Fluid Flow,

(2) HVAC & Ref. System,

(3) Thermal & Thermo-Fluids,

(4) Transport- Thermodynamics Properties (Refrigerants and Materials), and

(5) Energy Harvesting and its Environmental Impacts 


Last Update: 06-May-2025