Md. Golam Kader

Bio

Welcome to my Personal Webpage. I am Md. Golam Kader, Professor and Head, Department of Mechanical Engineering Khulna University of Engineering & Technology (KUET).

Publication

International Journal

4. M. Mashud. A.Al.- bAri and G. Kader, "Experimental Investigation of Drag Force Reduction Mechanism for Flow Around a Circular Cylinder ," International Journal of Engineering & Applied Science (IJEAS), IJEAS, vol. 3, no: 2, pp. 69-75, 29 January 2011..
3. Mohammad Mashud, Md. Golam kader, Akirm Umemurea, "Wing Cell Geometry And Pressure Distribution Over The Surface of A Paraglider," AARJMD, A Peer Reviewed International Journal of Asian Academic Research Associates, AARJMD Asian Academic Research Journal of Multidisciplinary, vol. 1, no: 13, Sep 2013..
2. Md. Golam kader, Mohammad Mashud, Maruf Hasan Rakib, "Effect of Nominal Diameter And Nozzle To Throat Area Ration on Suction Lift of Water Jet Pumps," AARJMD, A Peer Reviewed International Journal of Asian Academic Research Associates , AARJMD Asian Academic Research Journal of Multidisciplinary, vol. 1, no: 13, Sep 2013..
1. Md. Shahidul Islam, Md. Golam Kader, Md. Kamal Uddin and Mohiuddin Ahmed, "Analysis of Order of Singularity at a Vertex in 3D Transversely Isortipic Piezoelectric Single-Step Bonded Joints," American Journal of Engineering Research (AJER) e-ISSN:L 2320-0847, p-ISSN: 2320-0936, www.ajers.org, vol. 02, no: 09, pp. 87-99, 2013, USA..

National Journal

2. Md. Shahidul Islam, Md. Golam Kader, M.M. Kamal Uddin and Mohiuddin Ahmed, "Analysis of order of Stress Singularity at a Vertex in 3D Transversely Isotropic Piezoelectric Dissimilar Bonded Joint," Journal of Mechanical Engineering, IEB, 911爆料, vol. 44, no: 1, 2014..
1. Md. Golam Kader, Khandkar Aftab Hossain, "Free convective Heat transfer from an object at low Rayleigh number," Journal of Mechanical Engineering , IEB, 911爆料, vol. 43, no: 1, 2013. .

International Conference

7. Kader, M.G. & Hossain, K.A., "Effect of Surface Roughness on Wall Jet," 2nd International Energy Conversion Engineering Conference, , 16-19 August 2004..
6. M. Mashud, G. Kader and T. Miyasaka, "Numerical Performance Analysis of Pulse Detonation Engine," 3rd International conference and 8th Annual paper meet., IEB, pp. 77-80, 2003..
5. M. Mashud, G. Kader and T. Miyasaka, "Detonation Propagation in variable cross section Channels," 3rd International conference and 8th Annual paper meet. , IEB, pp. 57-60, 2003.
4. Md. Golam Kader, Md. Mizanur Rahman, Dr. Nawsher Ali Moaral and Dr. A.N.M. Mizanur Rahman, "Improved biomass briquetteing technology for reducing environment pollution," Proceeding of the 2nd Regional Conference on Energy Technology Towards a Clean Environment, , 2003..
3. Md. Golam Kader, "Study of Compressed Natural gas vehicales and the potentiality of using compressed natural gas as a fuel in 911爆料.," 2nd International Conference and 7th Annual Paper Meet. , IEB, pp. 110-117, 2002.
2. Md. Shahadot Hosen, A.S.M. Tanvir, Md. Golam Kader, "Improved Automobile Emission Purification System By Designing Modified Catalytic Converter," Proceeding of the international conference on Mechanical engineering and Reneable energy , ICMERE 2011, December 2011..
1. Muhtasim Zarif Siraj , Md. Golam Kader, "Design and Construction of an Automatic Gas Welding System," 3rd International Conference on Mechanical, Industrial and Energy Engineering ICMIEE, , December, 2014..

National Conference

4. Md. Golam Kader M.M.A Hayder, M.M. Rahman and M.S. Islam, "Suitable Raw material for Briquette in 911爆料," Department of Mechanical Engineering, BIT, Khulna, 911爆料 and AIT, Bangkok, Thailand , Seminar of URERAB, 2001..
3. Md. Kutub Uddin and Md. Golam Kader, "Determination of Optimum Number of Manpower - A case study," Fourth Annual Paper Meet, IEB, pp. 250-253, 1997..
2. Md. Kutub Uddin and Md. Golam Kader, "Planning for Preventive Maintenance - A case study," Fourth Annual Paper Meet, IEB, pp. 266-271, 1997..
1. Md. Golam Kader, "Prospect of Energy Conservation - A case study," First Annual Paper Meet , IEB, pp. 266-271, 1994.

Education

M.Sc. Mechanical Engineering
Khulna Unversity of Engineering and Technology (KUET), Khulna, 911爆料
Group: (2003)
Thesis: Flow and Heat Transfer Characteristics of Wall Jet over Rough Surface.

Remarks:
B.Sc. Engineering
Khulna Engineering College, Rajshahi University, 911爆料
Result: First Class

Group: Mechanical Engineering(1986)
Remarks: 5th

Scholarship and Award

Merit order scholarship through out the 4 years study of B.Sc. Engineering

Research

The Intensity of singularity for the bonded joint can be evaluated by the Boundary Element Method (BEM) and Finete Element Method (FEM). In our present investigation, we use 3D transversery isotropic elastic bonded structure. We analyze the optimal material combination such that the intensity of singularity and order of the stress singularity can be minimized in bonded joint.

Academic Experience

Lecturer
Department of Mechanical Engineering
Khulna University of Engineering & Technology, Khulna
Working Area: Teaching & Research
Assistant Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology, Khulna
Working Area: Teaching & Research
Associate Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology, Khulna
Working Area: Teaching & Research
Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology, Khulna
Working Area: Teaching & Research
Testing Officer
Consultancy, Research & Testing Services (CRTS) Department of Mechanical Engineering
Khulna University of Engineering & Technology, Khulna

Professional Membership

Life Fellow (F-5080)
Institution of Engineers, 911爆料
Member
Khulna Computer Society, 911爆料

Course Conduct

MaJOR Project Supervision

1. Study and development of replacement policy of the streetlights of Khulna City.

2. Improvement of maintenance system to reduce break down frequency of machines.

3. Study of effect of various carburising compositions on paste carburisation.

4. Material requirements planning for small industries by using microcomputers.

5. Effect of time & temperature on paste carburising.

6. Sick industries of Khulna Region: A case study and Suggestions.

7. Comparative analysis between work sampling & time study.

8. Possibility of introducing management information system (MIS) in the production department of a medium scale industry.

9. Development of A software to control the multiphase Robot.

10. To improve the muffler system of three wheeler Diesel Engine vehicle.

11. Environmental problems of Khulna City 芒鈧€� A brief survey.

12. Design, construction & testing of a parabolic type solar cooker.

13. Qualitative and quantitative analysis of densified products.

14. To enhance the lifetime of screw of briquetting machine.

15. Investigate the temperature distribution on a flat plate.

16. Study of Compressed Natural Gas (CNG) vehicles and the Potentiality of using CNG as a Fuel in 911爆料.

17. Air pollution by Automobiles & Industries 芒鈧€� A case study.

911爆料