911爆料

Department of Mechanical Engineering

Avatar

Dr. Md. Shariful Islam

Professor
PhD from University of Texas at El Paso, USA
+88 041 769 471 Ext. 439
[email protected]
Address: ME 318
Research Interest: Impact Resistance of Polymeric Materials; Interlaminar Strengthening of Composites Through Additive Manufacturing; Investigation of Free Edge Effect in Composites; Investigation on Mechanical Properties of Natural Fiber Composites; Textile Composites as Cryogenic Fuel Tank

Download CV

Bio

Dr. Md. Shariful Islam is currently working as a professor in the Department of Mechanical Engineering at Khulna University of Engineering & Technology. Dr. Islam has earned his Ph.D. and M.Sc. in Mechanical Engineering from The University of Texas at El Paso, USA and B.Sc. in Mechanical Engineering from Khulna University of Engineering & Technology, 911爆料. Dr. Islam's research interest includes Natural Fiber Composites, Fiber Metal Laminates and Multi-scale Material Modeling.

 

Publication

International Journal
  • 33. Mostafizur Rahman, Md Shariful Islam, Md Arifuzzaman, Md Abdullah Al Bari, "Effect of Material and Spoke Pattern on the Strength and Fatigue Life of Automotive Wheels (Accepted)," AIP Advances, AIP, 2025.
  • 32. Md Mozammel Hossain Talukder, Md Shariful Islam, Md Arifuzzaman, "Agro-Waste to High-Performance Composites: Cow Bone Particles as Renewable Reinforcements for Enhanced Mechanical and Fire Safety," Hybrid Advances, Elsevier BV, vol. 10, 2025, doi: https://doi.org/10.1016/j.hybadv.2025.100504
  • 31. Md Mahbub Morshed Haque, Suchinto Roy Dhrubo, Al-Fida Zubayer Pranto, Akash Ahmed, Md Miraj Arefin, Md Arifuzzaman, Md Shariful Islam, "Impact of Process Parameters and Material Selection on the Mechanical Performance of FDM 3D-Printed Components," Hybrid Advances, Elsevier BV, vol. 10, 2025, doi: https://doi.org/10.1016/j.hybadv.2025.100502
  • 30. Raju Ahammad, Md. Arifuzzaman, Md. Shariful Islam, "Enhancing thermo-mechanical properties of epoxy using flake-like micro expanded perlite particles," Polymer Composites, Wiley, vol. 2025, 2025, doi: https://doi.org/10.1002/pc.29667
  • 29. Raiyan Mohammad Iqbal, Raju Ahammad, Md Arifuzzaman, Md Shariful Islam, Md Mainul Islam, "Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites鈥擜 Comprehensive Review," Materials, MDPI, vol. 18, no: 5, 2025, doi: https://doi.org/10.3390/ma18051016
  • 28. Naushin Anjum, Raiyan Mohammad Iqbal, Xuelin Zhang, Pranto Karua, Mahathir Muntasir, Md Shariful Islam, Khalid Moinuddin, Md. Arifuzzaman, "Effect of bio-fillers on the mechanical, thermal, and fire properties of gypsum composites," Construction and Building Materials, Elsevier BV, vol. 466, no: 2025, 2025, doi: https://doi.org/10.1016/j.conbuildmat.2025.140274
  • 27. Md Abu Rayan Sajib, Md Shariful Islam, Md Arifuzzaman, Safina Kamal Shoily, "," Heliyon, Elsevier BV, vol. 10, no: 2024, 2024, doi: https://doi.org/10.1016/j.heliyon.2024.e37433
  • 26. Pranto Karua, Raju Ahammad, Md Shariful Islam, Md Arifuzzaman, "," Construction and Building Materials, Elsevier BV, vol. 446, no: 2024, 2024, doi: https://doi.org/10.1016/j.conbuildmat.2024.137899
  • 25. Pranto Karua,Md Arifuzzaman,Md Shariful Islam, "," Construction and Building Materials, Elsevier BV, vol. 441, no: 2024, 2024, doi: https://doi.org/10.1016/j.conbuildmat.2024.137432
  • 24. Touhid Hasan, M A Wadud, Mahmudul Hasan Niaz, Md. Kutub Uddin, Md Shariful Islam, "," Malaysian Journal on Composites Science and Manufacturing, Akademia Baru Publishing, vol. 14, no: 1, 2024, doi: https://doi.org/10.37934/mjcsm.14.1.3443
  • 23. Pranto Karua, Md Arifuzzaman, Md Shariful Islam, "Effect of Fiber Content on the Mechanical Properties of Jute Fiber Reinforced Perlite/Gypsum Composites," Malaysian Journal on Composites Science and Manufacturing, Akademia Baru Publishing, vol. 13, no: 1, 2024, doi: https://doi.org/10.37934/mjcsm.13.1.3644
  • 22. Md Sakhawat Hossain, Md Sayed Anwar, Md Shariful Islam, Md Arifuzzaman, "Effect of Fiber Orientation and Volume Fraction on Young鈥檚 Modulus for Unidirectional Carbon Fiber Reinforced Composites: A Numerical Investigation," Malaysian Journal on Composites Science and Manufacturing, Akademia Baru Publishing, vol. 13, no: 1, 2024, doi: https://doi.org/10.37934/mjcsm.13.1.4554
  • 21. Raju Ahammad, Md Arifuzzaman, Md Shariful Islam, "Effect of Micro-perlite Powder Content on Thermo-mechanical Properties of Epoxy Resin," Journal of Engineering and Technology, IUT, vol. 16, no: 1, 2024.
  • 20. Md Mahir Asif, Mohammad Omar Faisal, Md Jamiun Noor Shadman, Md Shariful Islam, "Investigation of Mechanical Properties of Jute-Carbon Fiber Reinforced Hybrid Composite," Journal of Engineering and Technology, IUT, vol. 16, no: 1, 2024.
  • 19. Sayed Mohammad Belal, Md Sayed Anwar, Md Shariful Islam, Md Arifuzzaman, Md Abdullah Al Bari, "," Hybrid Advances, Elsevier BV, vol. 4, no: 2023, 2023, doi: https://doi.org/10.1016/j.hybadv.2023.100112
  • 18. Md Sujon Ahmed, Md Sayed Anwar, Md Shariful Islam, Md Arifuzzaman, "," Results in Materials, Elsevier BV, vol. 20, no: 2023, 2023, doi: https://doi.org/10.1016/j.rinma.2023.100485
  • 17. Md Nazmul Islam, Md Sayed Anwar, Md Shariful Islam, Md Arifuzzaman, Md Abdullah Al Bari, "," Hybrid Advances, Elsevier BV, vol. 4, no: 2023, 2023, doi: https://doi.org/10.1016/j.hybadv.2023.100090
  • 16. Forhad Hossain, Md Arifuzzaman, Md Shariful Islam, Md Mainul Islam, "," Processes, MDPI AG, vol. 2023, no: 11, 2023, doi: https://doi.org/10.3390/pr11082456
  • 15. Fahim Faisal Arnob, Md Sayed Anwar, Md Shariful Islam, Md Arifuzzaman, Md Abdullah Al Bari, "," Engineering Solid Mechanics, Growing Science, vol. 11, no: 4, 2023, doi: https://doi.org/10.5267/j.esm.2023.5.005
  • 14. Pranto Karua, Md Arifuzzaman, Md Shariful Islam, "," Construction and Building Materials, Elsevier BV, vol. 387, no: 2023, 2023, doi: https://doi.org/10.1016/j.conbuildmat.2023.131625
  • 13. Md Shariful Islam, Luoyu Roy Xu, "," Applied Sciences, MDPI AG, vol. 12, no: 14, 2022, doi: https://doi.org/10.3390/app12147078
  • 12. Luoyu R Xu, Md Shariful Islam, Ricardo Martinez, Mark Flores, Kai Zhao, Alp Karako耀, Ertugrul Taciroglu, "," Journal of Reinforced Plastics and Composites, SAGE Publications, vol. 41, no: 19-20, 2022, doi: https://doi.org/10.1177/07316844211072250
  • 11. Kazi Jubair, Md Shariful Islam, Dipto Chakraborty, "," Journal of Engineering Advancements, SciEnPG, vol. 2, no: 04, 2021, doi: https://doi.org/10.38032/jea.2021.04.002
  • 10. Dipto Chakrabarti, Md Shariful Islam, Kazi Jubair, Md Rashedul H Sarker, "," Journal of Engineering Advancements, SciEnPG, vol. 1, no: 02, 2020, doi: https://doi.org/10.38032/jea.2020.02.002
  • 9. Mahir Asif, Kazi Adnan Rahman, Mohammad Omar Faisal, Md. Shariful Islam, "," Journal of Engineering Advancements, SciEnPG, vol. 1, no: 01, 2020, doi: https://doi.org/10.38032/jea.2020.01.002
  • 8. Md Shariful Islam, Sayed Azmy, Abdullah Almamun, "Comparative Study on Mechanical Properties of Banana and Rattan Fiber Reinforced Epoxy Composites," American Journal of Engineering Research, , vol. 8, no: 2, 2019.
  • 7. Mashuka Jahan, Md Shariful Islam, "Numerical Analysis of Impact Resistance of Polypropylene," International Journal of Mechatronics and Manufacturing Technology, , vol. 4, no: 1, 2019.
  • 6. M. A. Mahmud, M. S. Islam, "Numerical Analysis of Thermo-hydraulic Performance of Ground Heat Exchanger," Mechanical Engineering Research Journal, , vol. 11, pp. 38-43, 2018.
  • 5. A G Castellanos, Md S Islam, E Tarango, Y Lin, P Prabhakar, "," Textile Research Journal, SAGE Publications, vol. 88, no: 15, 2017, doi: https://doi.org/10.1177/0040517517708536
  • 4. M. S. Islam, P. Prabhakar, "," Materials & Design, Elsevier BV, vol. 133, pp. 332-339, 2017, doi: https://doi.org/10.1016/j.matdes.2017.07.038
  • 3. M. S. Islam, P. Prabhakar, "," Composites Part B: Engineering, Elsevier BV, vol. 116, pp. 89-98, 2017, doi: https://doi.org/10.1016/j.compositesb.2017.01.072
  • 2. A G Castellanos, M S Islam, M A I Shuvo, Y Lin, P Prabhakar, "," Journal of Sandwich Structures & Materials, SAGE Publications, vol. 20, no: 1, pp. 70-85, 2016, doi: https://doi.org/10.1177/1099636216650989
  • 1. Md. S. Islam, E. Melendez-Soto, A. G. Castellanos, P. Prabhakar, "," Cryogenics, Elsevier BV, vol. 72, no: 2015, pp. 82-89, 2015, doi: https://doi.org/10.1016/j.cryogenics.2015.09.005
International Conference
  • 53. Devashis Bagchi, Bickrom Saha, Md. Roknuzzaman, Md Arifuzzaman, Md Shariful Islam, "Effect of Nano Clay on the Mechanical Properties of Sandwich Structure," Proceedings of 8th International Conference on Mechanical, Industrial and Energy Engineering, , 2024.
  • 52. Md. Sabbir Raihan, Md. Mohaimenul Islam, Md Arifuzzaman, Md Shariful Islam, "Enhancing the Flexural Strength of Perlite/Gypsum Composite Panels and Their Sandwich Structures using Gypsum Layer," Proceedings of 8th International Conference on Mechanical, Industrial and Energy Engineering, , 2024.
  • 51. Bickrom Saha, Devashis Bagchi, Md. Roknuzzaman, Alamin Islam, Md. Shariful Islam, Md. Arifuzzaman, "Flexural Properties of Fly Ash Reinforced Perlite/Sodium Silicate Composite and Their Sandwich Structures," Proceedings of 8th International Conference on Mechanical, Industrial and Energy Engineering, , 2024.
  • 50. M A Wadud, Mohammad Nahidul Islam, Md Arifuzzaman, Md Shariful Islam, "Aerodynamic Performance Analysis of a Dual-Purpose Aircraft for Targeted Payload Delivery," Proceedings of 8th International Conference on Mechanical, Industrial and Energy Engineering, , 2024.
  • 49. Rizuanul Arefin Emon, Zarin Rahman Tapti, Mushfique Azad Takin, Md Shariful Islam, Arup Kumar Debnath, "Experimental investigation on the mechanical properties of dactyl-inspired fiber-metal laminates with glass fiber," Proceedings of 8th International Conference on Mechanical, Industrial and Energy Engineering, , 2024.
  • 48. Raiyan Mohammad Iqbal, Md Arifuzzaman, Md Shariful Islam, Raju Ahammad, "Mechanical Properties of Fly Ash/ Epoxy Composites using Fly Ash Obtained from Maitree Super Thermal Power Project, Rampal, 911爆料," Proceedings of the 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , 2024.
  • 47. Akash Baral, Md Jahid Hasan, Md Shariful Islam, Md Arifuzzaman, "Prediction of Mechanical Properties of Nano-particle Filled Glass Fiber Reinforced Composites Using Machine Learning Algorithms," Proceedings of the 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , 2024.
  • 46. Shahadot Hossain, Taslim Ben Alam Protik, Md Shariful Islam, Md Arifuzzaman, "Experimental Investigation of the Tensile and Bending Properties of Short Glass Fiber Reinforced Composite," Proceedings of the 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , 2024.
  • 45. Ahsanul Islam, Chinmoy Biswas, Shahinur Hasnat Rahat, Md Shariful Islam, Md Arifuzzaman, "Investigation on Mechanical and Fire Retardancy Properties of Non-woven Jute and Polyester Hybrid Fiber Reinforced Epoxy Composites," Proceedings of the 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , 2024.
  • 44. Md Mozammel Hossain Talukder, Md Shariful Islam, Md Arifuzzaman, "Effect of Cow Bone Micro-particle Reinforcement on the Mechanical Properties of Epoxy Based Composite," Proceedings of the 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , 2024.
  • 43. Raiyan Mohammad Iqbal, Md Arifuzzaman, Md Shariful Islam, Raju Ahammad, "Investigation on the Mechanical Properties of Fly Ash-filled Epoxy Composites," Proceedings of the 2nd International Conference on Mechanical, Manufacturing and Process Engineering, , 2024.
  • 42. Md Shahriar Ali, Masuka Mahnur Oishy, Md Shariful Islam, Md Arifuzzaman, "Experimental Study on the Mechanical Properties of Woven Jute Fiber/Human Hair Reinforced Hybrid Composite," Proceedings of the 6th Industrial Engineering and Operations Management 911爆料 Conference, , 2023.
  • 41. Durjoy Roy, Md Tahmid Hasan, Md Shariful Islam, Md Arifuzzaman, "Numerical Investigation of Flax/Bamboo Fiber Reinforced Hybrid Composites under Tensile Load," Proceedings of the 6th Industrial Engineering and Operations Management 911爆料 Conference, , 2023.
  • 40. Raju Ahammad, Md Arifuzzaman, Md Shariful Islam, "Effect of Alkali Treatment on Mechanical Properties of Non-woven Jute Fiber Reinforced Epoxy Composite," Proceedings of the 6th Industrial Engineering and Operations Management 911爆料 Conference,, , 2023.
  • 39. Md Tahmid Hasan, Apurba Roy, G M Ismail Hossain, Durjoy Roy, Jannatul Abu Nayeem, Md Arifuzzaman, Md Shariful Islam, "Effect of Chemical Treatment on the Interlaminar Fracture Toughness of Jute Fiber Reinforced Epoxy Composite," Proceedings of the 14th International Conference on Mechanical Engineering, , 2023.
  • 38. Md Tanvir Ahmed, Raju Ahammad, Apurba Roy, Md Arifuzzaman, Md Shariful Islam, "Interlaminar Reinforcement of Fiber Metal Laminate Using Eggshell Microparticles," Proceedings of the 14th International Conference on Mechanical Engineering, , 2023.
  • 37. Apurba Roy, Md Tanvir Ahmed, Md Arifuzzaman, Md Shariful Islam, "Numerical Optimization of Auxetic Structures for Energy Absorption Applications," Proceedings of the 14th International Conference on Mechanical Engineering, , 2023.
  • 36. G M Ismail Hossain, Mehedhi Hasan, Md Tahmid Hasan, Md Aasef Azhar Khan, Md Arifuzzaman, Md Shariful Islam, "Compressive Behavior of Lightweight Sandwich Structures Made of Perlite, Polystyrene and Formica Sheet," Proceedings of the 14th International Conference on Mechanical Engineering, , 2023.
  • 35. Sarthok Chandra Pandit, Md Arifuzzaman, Md Shariful Islam, Alamin Islam, "Characterization of Sodium Silicate Solution Synthesized from Waste Rice Husk and Manufacturing of Copper Slag-Based Geopolymers," Proceedings of the 14th International Conference on Mechanical Engineering, , 2023.
  • 34. Md Tanvir Ahmed, Raju Ahammad, Apurba Roy, Md Arifuzzaman, Md Shariful Islam, "Effect of Eggshell Powder Content on The Mechanical Properties of Jute Fiber Reinforced Fiber Metal Laminate," Proceedings of the 7th International Conference on Mechanical Engineering and Renewable Energy, , 2023.
  • 33. Masuka Mahnur Oishy, Md Shahriar Ali, Kazi Mostafijur Rahman, Md Shariful Islam, "Investigation of the Mechanical Properties of Unidirectional Jute Fiber-Human Hair Reinforced Hybrid Composites," Proceedings of the International Conference on Mechanical, Material and Production Engineering, , 2023.
  • 32. Raiyan Mohammad Iqbal, Md Shariful Islam, Md Arifuzzaman, "Effect of End Reinforcement on the Strength of Jute Fiber Reinforced Epoxy Composite Lap Joint," Proceedings of the International Conference on Mechanical, Material and Production Engineering, , 2023.
  • 31. Raju Ahammad, Md Omar Faruk, Arup Kumar Debnath, Md Shariful Islam, "Effect of Adhesive Layer Thickness and Adherent Geometry on the Tensile Properties of Adhesively Bonded T-Joint," Proceedings of the 7th International Conference on Engineering Research, Innovation and Education, , 2023.
  • 30. Soumik Sarker, A. S. M. Aziz Naser Takey, Raju Ahammad, Md Shariful Islam, Md Arifuzzaman, "Mechanical Behavior of Sandwich Structure Made of Perlite Foam Core and JFRP Skin," Proceedings of the 7th International Conference on Mechanical, Industrial and Energy Engineering, , 2022.
  • 29. Arfan Islam, Arup Kumar Debnath, Md Shariful Islam, Md Arifuzzaman, "Numerical Analysis of the Rear Wing Mount of a Formula 1 Type Car for Material Selection," Proceedings of the 7th International Conference on Mechanical, Industrial and Energy Engineering,, , 2022.
  • 28. Pritam Debnath, Arup Kumar Debnath, Raju Ahammad, Md Arifuzzaman, Md Shariful Islam, "Numerical Simulation of Bi-Adhesive Lap Joints," Proceedings of the 7th International Conference on Mechanical, Industrial and Energy Engineering, , 2022.
  • 27. Raju Ahammad, Arup Kumar Debnath, Md Mahmudur Rahman, Md Arifuzzaman, Md Shariful Islam, "Mechanical Characterization of Date Palm Rachis Fiber Reinforced Epoxy Composite," Proceedings of the 7th International Conference on Mechanical, Industrial and Energy Engineering, , 2022.
  • 26. Md Naimur Rahman Antu, Md Mehidi Hasan, Md Shariful Islam, "Effect of Temperature on the Tensile Properties of Adhesively Bonded Single Lap Joint," Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering, , 2022.
  • 25. Md Mehidi Hasan, Md Naimur Rahman Antu, Md Shariful Islam, "Numerical Study of Negative Stiffness Honeycomb Structure for Energy Absorption Applications," Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering, , 2022.
  • 24. Md Arif Iqbal Khan, Zannatul Ferdous, Md Shariful Islam, "Mechanical Characterization of Drumstick Fiber Reinforced Epoxy Composite," Proceedings of the 6th International Conference on Mechanical, Industrial and Energy Engineering, , 2020.
  • 23. Zihad Rayhan, Md Shariful Islam, Dewan Wardy Hasan, "Investigation of Mechanical Properties of Jute, Cotton and Glass Fiber Reinforced Hybrid Composites," Proceedings of the 6th International Conference on Mechanical, Industrial and Energy Engineering, , 2020.
  • 22. Fateh Mohammad Saif, Md Shariful Islam, "Investigation of Mechanical Properties of Bagasse Fiber and Human Hair Reinforced Hybrid Composite," Proceedings of the 6th International Conference on Mechanical, Industrial and Energy Engineering, , 2020.
  • 21. Md Abdullah Bin Aziz, Md Shariful Islam, "Effect of Lower Surface Modification on Aerodynamic Characteristics of an Airfoil," Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, , 2017.
  • 20. Raudel O. Avila, Md S. Islam, Pavana Prabhakar, "Thermal Gradient on Hybrid Composite Propellant Tank Materials at Cryogenic Temperatures," Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, , 2016.
  • 19. Md Shariful Islam, Pavana Prabhakar, "Free Edge Effect in Multi-directional Laminate under Uniaxial loading," Proceedings of the ASC 31st Technical Conference, , 2016.
  • 18. Raudel Avila, Md Shariful Islam, Pavana Prabhakar, "Influence of Cryogenic Thermal Gradient on Composite Propellant Tank Materials," Proceedings of the 17th US-Japan Conference on Composite Materials, , 2016.
  • 17. Mohammad Tauhiduzzaman, Md Shariful Islam, Pavana Prabhakar, "Design Optimization of Sandwich Core and Manufacture Through Additive Manufacturing," Proceedings of the Southwest Emerging Technology Symposium, , 2016.
  • 16. M. S. Islam, P. Prabhakar, "Free Edge effect in Multidirectional Laminates," Proceedings of the Southwest Emerging Technology Symposium, , 2016.
  • 15. Md S. Islam, R. Avilla, A. G. Castellanos, P. Prabhakar, "Hybrid Textile Composites as Potential Cryogenic Tank Materials," Proceedings of the 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, , 2016.
  • 14. A. Castellanos, Md S. Islam, M. A. I. Shuvo, Y. Lin, P. Prabhakar, "Impact Response of Woven Composites with Interlaminar Reinforcement," Proceedings of the 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, , 2016.
  • 13. M. S. Islam, G. Castellanos, P. Prabhakar, "Effect of Curing Induced Parameters during Manufacturing of Textile Composites," Proceedings of the ASC 30th Technical Conference, , 2015.
  • 12. A. Castellanos, M. S. Islam, S. Quevedo, M. A. I. Shuvo, Y. Lin, P. Prabhakar, "Nanowire Stiffening of Woven Composites Towards Enhancing Interlaminar Fracture Toughness," Proceedings of the ASC 30th Technical Conference, , 2015.
  • 11. A. Castellanos, Md S. Islam, S. Quevedo, M.A.I. Shuvo, Y. Lin, P. Prabhakar, "Stiffening of Woven Composites for Enhancing Mode-I Interlaminar Fracture Toughness," Proceedings of the 5th Southwest Energy Science and Engineering Symposium, , 2015.
  • 10. Md Shariful Islam, Enrique Melendez-Soto, Pavana Prabhakar, "Experimental Investigation of Woven Composites as Potential Cryogenic Tank Materials," Proceedings of the 5th Southwest Energy Science and Engineering Symposium, , 2015.
  • 9. Md Shariful Islam, Pavana Prabhakar, "Effect of Compaction during Manufacturing of Textile Composites," Proceedings of the 3rd International Conference on Mechanical, Industrial and Energy Engineering, , 2014.
  • 8. Alma Leanos, Md Shariful Islam, Pavana Prabhakar, "Modeling Progressive Damage and Failure for Polymer Matrix Composites," Proceedings of the 3rd International Conference on Mechanical, Industrial and Energy Engineering, , 2014.
  • 7. M. S. Islam, P. Prabhakar, "Computational Modeling of Curing Induced Damage due to Compaction on Woven Fabric Composite," Proceedings of the ASC 29th Technical Conference/16th US-Japan Conference on Composite Materials,, , 2014.
  • 6. A. Leanos, M. S. Islam, P. Prabhakar, "Novel Computational Framework for Thermal Shock Resistance Design of Carbon Composites," Proceedings of the ASC 29th Technical Conference/16th US-Japan Conference on Composite Materials, , 2014.
  • 5. M. S. Islam, P. Prabhakar, H. Kreiger, S. Stapleton, T. Gries, "Prediction of Damage due to Compaction during Manufacturing of Textile Composites," Proceedings of the 16th European Conference on Composite Materials, , 2014.
  • 4. Firoz Alam, Huy Ho, Jie Yang, Arun Kumar, Roesfiansjah Rasjidin, Sayed Aminul Ehsan, Golam Mainuddin, Shariful Islam, "A Study of Baseball Aerodynamic Drag," Proceedings of the International Conference on Mechanical Engineering, , 2011.
  • 3. Firoz Alam, Huy Ho, Jie Yang, Arun Kumar, Sayed Aminul Ehsan, Golam Mainuddin, Shariful Islam, Abhijit Date, "Aerodynamics of A Baseball- An Effect of Seams," Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, Chittagong, , 2011.
  • 2. Md Shariful Islam, K.A. Hossain, "Heat Transfer Characteristics of Rectangular Blocks in a Channel," Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, , 2010.
  • 1. Mohammad Mashud, Md Shariful Islam, Ghazi Saiful Bari, Md Rasel Islam, "Reduction of Drag Force of a Cylinder by Attaching Cylindrical Rings," Proceedings of the 13th Asian Congress of Fluid Mechanics, , 2010.

Education

  • Ph.D. Mechanical Engineering
    University of Texas at El Paso, United States
    Group: (2016)
    Remarks:

  • M.Sc. Mechanical Engineering
    University of Texas at El Paso, United States
    Remarks:

  • B.Sc. Mechanical Engineering
    Khulna University of Engineering & Technology, 911爆料
    Group: (2008)
    Remarks:

Scholarship and Award

  • University Merit Scholarship, Khulna University of Engineering & Technology, Khulna, 911爆料 (2004-2008). Feb 03, 2008
  • Moderator, Spectrum (A professional skill development club), Khulna University of Engineering & Technology, Khulna, 911爆料 (2017-Till Date).
  • Trusted Reviewer Award, IOP Science Publisher (2024).
  • Masters Thesis Competition, 6th Industrial Engineering and Operations Management 911爆料 Conference, Dhaka, 911爆料, December, 2023.
  • Undergraduate Student Paper Competition, 6th Industrial Engineering and Operations Management 911爆料 Conference, Dhaka, 911爆料, December, 2023.
  • Best Paper Award, 1st International Conference on Mechanical, Material and Production Engineering (ICMMPE), Islamic University of Technology, Gazipur, 911爆料, July, 2023.
  • Best Paper Award, 7th International Conference on Mechanical, Industrial and Energy Engineering, (ICMIEE 2022), Khulna University of Engineering & Technology, Khulna, 911爆料, December, 2022.
  • Graduate Teaching/Research Assistant, The University of Texas at El Paso, El Paso, TX, USA (2012-2016).
  • Cytec Student Paper Award for Composite Processing, ASC 29th Technical Conference/16th US-Japan Conference on Composite Materials, San Diego, California, USA, September 2014.
  • Best Paper Award, 3rd International Conference on Mechanical, Industrial and Energy Engineering, (ICMIEE 2014), Khulna University of Engineering & Technology, Khulna, 911爆料, December, 2014.

Research



Academic Experience

  • Lecturer
    Mechanical Engineering
    Khulna University of Engineering & Technology (KUET), Khulna Oct 12, 2008 to Dec 31, 2011
  • Assistant Professor
    Mechanical Engineering
    Khulna University of Engineering & Technology (KUET), Khulna Jan 01, 2012 to Jul 27, 2019
  • Associate Professor
    Mechanical Engineering
    Khulna University of Engineering & Technology (KUET), Khulna Jul 28, 2019 to Jul 14, 2021
  • Professor
    Mechanical Engineering
    Khulna University of Engineering & Technology (KUET), Khulna Jul 15, 2021 to Jan 01, 1970

Course Conduct


Supervision

Student Corner


Last Update: August 21, 2025 05:20