Dr. Md. Shahidul Islam

Bio

Prof. Md. Shahidul Islam, PhD

Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET)
Khulna-9203, 911爆料
Phone: +88-01552636365
e-mail: [email protected]
Website: /me/shahidulbitk

Research Area: Computational Mechanics (Solid Mechanics and Materials Engineering)

Specific Interest:
1. Analysis of intensity of singularity at a vertex in 3D transversely isotropic piezoelectric bonded joints by boundary element method.
2. Analysis of order of singularity in 3D transversely isotropic piezoelectric and elastic bonded joints by finite element method.

Remarks: The Intensity of singularity for the bimaterial joint can be evaluated by the Boundary Element Method (BEM) and the order of the stress singularity for the bimaterial joint can be evaluated by the eigen analysis based on Finite Element Method (FEM). In our present investigation, we use 3D transversely isotropic piezoelectric and elastic bonded structure. The influence of the electric field should be considered for the deformation of the piezoelectric material. We analyze the optimal material combination such that the intensity of singularity and order of the stress singularity can be minimized.

Experience in Teaching, Research and Industry:

Total 23 Years of Teaching, Research and Industrial experience.

EDUCATION

Ph.D. in Mechanical Engineering

Nagaoka University of Technology (NUT), Nagaoka, Niigata, Japan, 2012.

Masters of Engineering in Mechanical Engineering

Nagaoka University of Technology (NUT), Nagaoka, Niigata, Japan, 2009.

B.Sc. Engineering in Mechanical Engineering

Khulna University of Engineering & Technology (KUET), Khulna, 911爆料, 2001.

EXPERIENCE

Professor (Grade-2), Department of Mechanical Engineering, KUET (08-12-2020 to Till Date)

Professor (Grade-3), Department of Mechanical Engineering, KUET (06-09-2016 to 07-12-2020)

Associate Professor, Department of Mechanical Engineering, KUET (06-07-2014 to 05-09-2016)

Assistant Professor, Department of Mechanical Engineering, KUET (09-05-2006 to 05-07-2014)

Lecturer, Department of Mechanical Engineering, KUET (09-03-2003 to 08-05-2006)

Executive (Power Plant), Beximco Textiles Limited, Dhaka (02-11-2002 to 08-03-2003)

Maintenance Engineer, Dhaka Tobacco Industry, Dhaka (01-09-2002 to 01-11-2002)

Assistant Engineer, Prasthapana Limited, Dhaka (01-04-2002 to 31-08-2002)

RESEARCH PUBLICATION

More than 60 research papers/articles have been published in different national/international journals/ conferences/ seminars, etc.

ADMINISTRATIVE EXPERIENCE

1) Former Vice Chancellor (Acting), Khulna University of Engineering & Technology (KUET)

2) Former Member of the Syndicate, Khulna University of Engineering & Technology (KUET)

3) Former Dean, Faculty of Mechanical Engineering, KUET

4) Former Head, Dept. of Mechanical Engineering, KUET

5) Head, Dept. of Materials Science and Engineering, KUET

6) Member of the Syndicate, Khulna Khan Bahadur Ahsanullah University

7) Member of the Academic Council, Khulna University of Engineering & Technology (KUET)

PROFESSIONAL SERVICE EXPERIENCE

1) Technical Expert Committee Member, Mongla Port Authority and 911爆料 Cable Shilpa Limited

2) Member of Review Committee, Professor Promotion of University of Wisconsin Milwaukee, USA

3) Member of Professor and Associate Professor Selection Board, Shahjalal University of Science and Technology (SUST), Sylhet

4) Member of Committee for Advanced Studies and Research, KUET, Khulna

5) Examiner for Evaluating the PhD Thesis of various universities of Australia, India and 911爆料

6) Member of Committee for Inspection of Physical Infrastructure and Other 911爆料 of the Proposed Private University (BAUST, Khulna)

7) President of Teachers Association, Khulna University of Engineering & Technology (KUET)

8) Paper Setter of Bangladesh Public Service Commission (BPSC)

9) Examination Committee Member of RUET, DUET and Rajshahi University

10) Member of Officer (Grade 4 to Grade 10) Selection Committee, KUET, Khulna

11) Member of Officer and Staff Selection Committee, 911爆料 Cable Shilpa Limited (BCSL), Khulna

12) Member of Central Admission Committee, CKRUET Combined Admission Test 2022 and 2023

13) Chairman of Local Admission Committee, CKRUET Combined Admission Test 2022

14) Chairman of Consultancy, Research and Testing Service (CRTS), Dept. of Mechanical Engineering

15) Chairman of 8^th International conference on Mechanical, Industrial & Energy Engineering, 2024

16) Member of Disciplinary Committee, Library Committee, Executive Committee, etc., KUET

Publication

International Journal

21. Shah Mohammad Azam Rishad, Md Shahidul Islam, Md Ashraful Islam, "Strength and Reliability of Adhesive-Bonded Joints in Semiconductor Packaging: A Computational Analysis," International Journal of Automotive and Mechanical Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah Publishing, vol. 22, no: 2, 2025, doi: https://doi.org/10.15282/ijame.22.2.2025.17.0954
20. Shah Mohammad Azam Rishad, Md Ashraful Islam, Md Shahidul Islam, "Analysis of Stress Distribution of CFRP Bonded Joints: A Study of Numerical and Machine Learning Approach," Journal of Heliyon, Elsevier Ltd., vol. 11, no: 03, 2025, doi: https://doi.org/10.1016/j.heliyon.2025.e42440
19. Jasim Ahmed Chowdhury, Md. Shahidul Islam, Md. Ashraful Islam, Md Abdullah Al Bari, Arup Kumar Debnath, "," Sustainable Structures, Sustainable Development Press Limited, vol. 5(2), 2025, doi: 10.54113/j.sust.2025.000073
18. Shah Mohammad Azam Rishad, Md. Shahidul Islam, Md. Ashraful Islam, "Evaluation of stress distributions in trimaterial bonded joints with nano-resin adhesive using machine learning models," Results in Materials, Elsevier B.V., vol. 23, 2024, doi: https://doi.org/10.1016/j.rinma.2024.100618
17. Samiul Alam, Md. Abdullah Al Bari, Shadman Tahsin Nabil, Sk. Tahmid Muhatashin Fuyad, Shabab Saad, Md. Shahidul Islam, Md. Golam Kibria, "Effect of Pre-Hydrolysis and Salt- Impregnation on Biochar Production from Jute Stick," ournal of Biomass Conversion and Biorefinery, SpringerVerlag GmbH Germany, 2023, doi: https://doi.org/10.100 7/s13399-023-03846- 1
16. Somnath Somadder and Md. Shahidul Islam, "Effect of Adhesive Layer Thickness and Slant Angle on Piezoelectric Bonded Joints," Journal of Mechanical Engineering, Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia, vol. 19, no: 2, 2022.
15. Pial Das and Md. Shahidul Islam, "Structural Analysis of a Thick-Walled Pressure Vessel using FEM," The Journal of Engineering Science (JES), Faculty of Civil Engineering, Khulna University of Engineering & Technology, vol. 10, no: 2, pp. 69-78, 2019.
14. Somnath Somadder and Md. Shahidul Islam, "Stress Analysis of a Cylinder Subjected to Thermomechanical Loads by using FEM," IOP Science: Materials Science and Engineering, IOP Publishing Ltd., USA., vol. IOP Conf. Series, 2018.
13. Somnath Somadder and Md. Shahidul Islam, "Stress Analysis of a Thick Walled Orthotropic Bonded Cylinder under Pressure and Temperature by using FEM," International Journal of Mechatronics and Manufacturing Technology, Mantech Publications, vol. 3, no: 1, pp. 1-28, 2018.
12. Shafayet Hossain and Md. Shahidul Islam, "Numerical Investigation on Shell-and-Tube Heat Exchanger with Segmental and Helical Baffles," Journal of Mechanical and Mechanics Engineering, MAT Journals, vol. 4, no: 2, pp. 1-16, 2018.
11. Md. Shahidul Islam, Minhaz Morshed, and A. H. M. Abdullah Al Mamun, "Evaluation of stress field at the vertex of the interface in three-dimentional dissimilar material joints," Int. Journal of Mechanical and Production Engineering,, IRAJ, vol. 6, no: 2 (Part- 3), pp. 24-30, 2018.
10. Md. Shahidul Islam and Hideo Koguchi, "Influence of Stress Singularity on Transversely Isotropic Piezo-ceramic Bonded Joints," Journal of Mechanical Engineering and Applied Mechanics, Mantech Publication, vol. 2, no: 3, pp. 1-16, 2017.
9. Md. Shahidul Islam and Hideo Koguchi, "Investigation of Order of Singularity in 3D Transversely Isotropic Piezoelectric Bimaterial Joints by FEM," Journal of Circuits, Systems, and Computers, JCSC, World Scientific Publishing Co. Pte. Ltd., vol. 24, no: 2, pp. 1540001-21, 2015.
8. Md. Shahidul Islam, Md. Golam Kader, M. M. Kamal Uddin, Mohiuddin Ahmed, "Analysis of Order of Stress Singularity at a vertex in 3D transversely Isotropic piezoelectric Dissimilar Bonded Joints," Journal of Mechanical Engineering, IEB, vol. 44, no: 1, pp. 1-5, 2014.
7. Md. Shahidul Islam and Hideo Koguchi, "Analysis of Intensity of Singular Stress Fields in Two-phase Transversely Isotropic Piezoelectric Single-step Bonded Joints," ISESCO JOURNAL of Science and Technology, ICPSR, Morocco., vol. 10, 2014.
6. Md. Shahidul Islam, Md. Golam Kader, and M. M. Kamal Uddin, "Investigation of order of singularity in 3D two-phase transversely isotropic piezoelectric dissimilar joints by eigenanalysis method," Procedia Engineering, Elsevier Ltd., vol. 90, pp. 58-64, 2014.
5. Md. Shahidul Islam, Md. Golam Kader, Md. Kamal Uddin, and Mohiuddin Ahmed, "Analysis of order of singularity at a vertex in 3D transversely isotropic piezoelectric single-step bonded joints," American Journal of Engineering Research (AJER), AJER, USA., vol. 02, no: 09, pp. 87-99, 2013.
4. Md. Shahidul Islam and Koguchi Hideo, "Analysis of singularity at a vertex in 3D transversely isotropic piezoelectric single-step bonded joints with various thickness by boundary element method," Journal of Solid Mechanics and Materials Engineering, JSME, Japan, vol. 6, no: 7, pp. 844-859, 2012.
3. Md. Shahidul Islam and Koguchi Hideo, "Intensity of singularity analysis for three-dimensional two-phase transversely isotropic piezoelectric bonded joints," Transaction on GIGAKU, NUT, vol. 1, pp. 01019/1-6, 2012.
2. Md. Shahidul Islam and Koguchi Hideo, "Characteristics of singular stress distribution at a vertex in transversely isotropic piezoelectric dissimilar material joints," Journal of Solid Mechanics and Materials Engineering, JSME, Japan, vol. 4, no: 7, pp. 1011-1026, 2010.
1. M.M. Kamal Uddin, M. Shahidul Islam and Khandkar Aftab Hossain, "Effect of Reynold numbers on fluid flow and heat transfer characteristic over a rectangular prism in uniform flow," ISESCO Science and Technology Vision, ICPSR, vol. 5, no: 8, pp. 35-39, 2009.

International Conference

39. Joyanta Roy Chowdhury, Md. Shahidul Islam, Kishore Kanti Das, MD Raihan Jommadder, "Numerical Study on the Heat Transfer Characteristics for Laminar Flow with Triangular Pin Fin in Arrays," 8th International Conference on Engineering Research, Innovation and Education (ICERIE-2025), School of Applied sciences & Technology, SUST, 911爆料, 2025.
38. Md. Imran Hosen, Md. Shahidul Islam, Mir Anjirin Tazrin, MD Raihan Jommadder, "Numerical Analysis of Stress Concentration Factor for Shoulder Filleted Shaft with Relief Groove under Tensile Loading Condition," 8th International Conference on Engineering Research, Innovation and Education (ICERIE-2025), School of Applied sciences & Technology, SUST, 911爆料, 2025.
37. Mir Anjirin Tazrin, Md. Shahidul Islam, Rittika Ghosh, and Md. Imran Hosen, "Numerical Investigation of Diffusion Bonded Joints Using Finite Element Method," 8th International Conference on Engineering Research, Innovation and Education (ICERIE-2025), School of Applied sciences & Technology, SUST, 911爆料, 2025.
36. Rittika Ghosh, Md. Shahidul Islam, Adnan Roshid Shawon, and Mir Anjirin Tazrin, "Numerical Investigation of Knuckle Pin with Glass Reinforced Composite Using Finite Element Method," 8th International Conference on Engineering Research, Innovation and Education (ICERIE-2025), School of Applied sciences & Technology, SUST, 911爆料, 2025.
35. Kishore Kanti Das, Md. Shahidul Islam, Joyanta Roy Chowdhuri, Rifat Ul Alam, "Numerical Analysis of Solar Air Heater with Transverse Semi Hexagonal Ribs," 8th International Conference on Engineering Research, Innovation and Education (ICERIE-2025), School of Applied sciences & Technology, SUST, 911爆料, 2025.
34. Md. Sadman Iram Fahim, Md. Shahidul Islam, "Influence of Interlayer Thickness on Singular Stress Field in Piezoelectric Bonded Joint," Proceedings of the 14th International Conference on Mechanical Engineering (ICME2023), BUET, 911爆料, 2023.
33. Md. Tasnim Rana and Md. Shahidul Islam, "Payload Estimation and Factor Analysis of a Lighter than Air (LTA) System as Aerostat for Day Long Environmental Data Collection at A Specific Altitude," Proceedings of the International Conference on Engineering, Research, Innovation and Education (ICERIE, 2023), SUST, 911爆料., 2023.
32. Samiul Alam, Md. Sumon Robbany, Md Abdullah Al Bari, and Md Shahidul Islam, "Three Stage Carbonisation: Biochar Production from Jute Stick," 7th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, pp. 2022-095, 22-24 December, 2022.
31. Rahul Sarker, Prof. Dr. Md. Shahidul Islam, and Somnath Somadder, "Numerical Investigation of Stress Field Near the Vertex of a 3D Three Layer Piezoelectric Bonded Joint," International Conference on Mechanical, Manufacturing and Process Engineering芒鈧€姑⑩偓鈥� (ICMMPE - 2022), Faculty of Mechanical Engineering, DUET, 25-27 June 2022.
30. Md. Sakib Shahriar, Dr. Nasrin Akhter, Dr. Md. Shahidul Islam, "Numerical Analysis of Displacement and Stress Field on a Femur Bone," International Conference on Mechanical, Manufacturing and Process Engineering芒鈧€姑⑩偓鈥� (ICMMPE - 2022), Faculty of Mechanical Engineering, DUET, 25-27 June 2022.
29. Md. Tasnim Rana and Md. Shahidul Islam, "Design approach of an LTA system as aerostat for weather monitoring at a specific altitude," Physics for Sustainable Development and Technology (ICPSDT-2022), Department of Physics, CUET, 22-23 January 2022.
28. Md. Jahangir Hossain, and Md. Shahidul Islam, "Characteristic of Interlayer Thickness on Singular Stress Field in 3D Bonded Joint using FEM," International Conference on Mechanical Engineering and Renewable Energy (ICMERE2019), Department of Mechanical Engineering, pp. 177, 11芒鈧€�13 December, 2019.
27. Pranto Karua, and Md. Shahidul Islam, "Influence of the Roof of Car to Reduce Fuel Consumption," International Conference on Mechanical Engineering and Renewable Energy (ICMERE2019), Department of Mechanical Engineering, pp. 173, 11芒鈧€�13 December, 2019.
26. Minhaz Morshed, Md. Shahidul Islam and Md. Zeaur Rahman, "Numerical Analysis of Singular Stress Field in 3D Isotropic Elastic Bi-material Joints using FEM," International Conference on Engineering, Research, Innovation and Education (ICERIE, 2019), School of Applied Sciences and Technology, pp. ICERIE 027, 25-27 January, 2019.
25. Md. Jahangir Hossain and Md. Shahidul Islam, "Influence of Interlayer Thickness on the Singular Stress Field in 3D Three- Layered Bonded Joints using FEM," 5th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, pp. 2018-330, 23-24 December, 2018.
24. Md.Tasnim Rana, and Md. Shahidul Islam, "Designing Approach of Blimp for a Hybrid VTOL Aerial Robot," 5th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, pp. 2018-315, 23-24 December, 2018.
23. Rahul sarker and Md. Shahidul Islam, "Investigation of Different Mechanical Properties on Various Hybrid Natural Fiber Based Polymer Composites," 5th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, pp. 2018-278, 23-24 December, 2018.
22. Debasish Adhikary and Md. Shahidul Islam, "Study on Bio-Fertilizer Extraction and Management of Municipal Solid Waste of Khulna City," 5th International Conference on Mechanical, Industrial and Energy Engineering, Faculty of Mechanical Engineering, pp. 2018-170, 23-24 December, 2018.
21. Md. Shahidul Islam and A. T. M. Mashud, "Characteristic of Stress Distribution at a Vertex in Orthotropic Piezo-ceramic Bi-material Bonded Joints," International Conference on Mechanical Engineering and Renewable Energy (ICMERE2017), Department of Mechanical Engineering, pp. 065, 18-20 December, 2017.
20. Md. Shahidul Islam, "Stress Analysis in 3D Two-phase Transversely Isotropic Piezo-ceramic Bi-material using BEM ," 4th International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE 2016), Faculty of Mechanical Engineering, pp. 160375, 26-27 December, 2016.
19. Md. Shahrier Hasan , Md. Shahidul Islam , "Investigation of Stress Field Responsible for Debonding of Transversely Isotropic Elastic Bimaterial Joint by FEM," 4th International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE 2016), Faculty of Mechanical Engineering, pp. 160289, 26-27 December, 2016.
18. A. H. M. Abdullah Al Mamun, Md. Shahidul Islam, "Numerical Investigation of Stress Field in Anisotropic Elastic Bonded Joints," 4th International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE 2016), Faculty of Mechanical Engineering, pp. 160238, 26-27 December, 2016.
17. Md. Nasif , Md. Shahidul Islam, Imran Shikder, Md. Ashif , "Investigation of Displacement and Stress Field in Elastic-Plastic Bi-material Single Step Bonded Joint," 4th International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE 2016), Faculty of Mechanical Engineering, pp. 160126, 26-27 December, 2016.
16. Md. Jakaria Apu and Md. Shahidul Islam, "Investigation of Displacement, Strain and Stress in Single Step Transversely Isotropic Elastic Bonded Joint," International Conference on Mechanical Engineering, ICME2015, pp. pp.046, 18 芒鈧€� 20 December, 2015.
15. Debasish Adhikary and Md. Shahidul Islam, "Feasibility Analysis of Eco-Friendly Municipal Waste Management in Khulna City," International Conference on Mechanical, Industrial and Materials Engineering, ICMIME2015, pp. ET-05, 11-13 December, 2015.
14. Md. Shahidul Islam, Md. Golam Kader, M. M. Kamal Uddin, "Investigation of order of singularity in 3D two-phase transversely isotropic piezoelectric dissimilar joints by eigen analysis method," International Conference on Mechanical Engineering 2013, ICME BUET, pp. 069, 20 芒鈧€� 21 June, 2014, .
13. Md. Shahidul Islam, Mohiuddin Ahmed, and M. M. Kamal Uddin, "Numerical Investigation of Singularity at a Vertex in 3D Transversely Isotropic Piezoelectric Bonded Joints by FEM," 1st International Conference on 911爆料 Information and Communication Technology (EICT 2013), 978-1-4799-2299-4/13/$31.00 脗漏2013 IEEE, pp. 256-273, 13-15 February, 2014.
12. Md. Shahidul Islam and Hideo Koguchi, "Analysis of Intensity of Singularity at a Vertex in 3D Transversely Isotropic Piezoelectric Bimaterial Joints by Boundary Element Method," 2nd IEEE International Conference of Informatics, Electronics & Vision (ICIEV 2013), , 17-18 May, 2013.
11. Md. Shahidul Islam and Hideo Koguchi, "Analysis of Intensity of Singular Stress Fields in Three-dimensional Transversely Isotropic Piezoelectric Bonded Joints," 2nd International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2012), , 1-2 February, 2013.
10. Md. Shahidul Islam and Hideo Koguchi, "Stress Analysis for Three-Dimensional Two-Phase Transversely Isotropic Piezoelectric Bonded Joints," The 1st International GIGAKU Conference in Nagaoka (IGCN), , February 3-5, 2012.
9. Md. Shahidul Islam and Hideo Koguchi, "Fundamental Solution of Three-Dimensional Two-Phase Transversely Isotropic Piezoelectric Bonded Joints," 13th Annual Peper Meet (APM), , September 25, 2010.
8. Md. Shahidul Islam and Hideo Koguchi, "Effect of Singularity at Vertex in Transversely Isotropic Piezoelectric Dissimilar Material Joints," JSME 47th Hokuriku-Shinetsu Branch Conference, , March 9-10, 2010.
7. Md. Shahidul Islam and Hideo Koguchi, "Characteristics of singular stress distribution at a vertex in transversely isotropic piezoelectric dissimilar material joints," Asian Pacific Conference for Materials and Mechanics, , November 13-16, 2009.
6. Hideo Koguchi and Islam, Md. Shahidul, "Order of Stress Singularity Analysis in 3D Transversely Isotropic Piezoelectric Bonded Joint by FEM," JSME 22nd Computational Mechanics Conference, , October 10-12, 2009.
5. Hideo Koguchi and Md. Shahidul Islam, "Stress Singularity Analysis of Three-Dimensional Transversely Isotropic Piezoelectric Bimaterial芒鈧�, JSME 46th Hokuriku-Shinetsu Branch Conference," JSME 46th Hokuriku-Shinetsu Branch Conference, , March 07, 2009.
4. M. Mashud, M. Shahidul Islam, C.M. Refaul Ferdous, M.H. Rahaman, K.T. Haq M.L.Rahman, "Wind Energy: Energy from Moving Air," Published in seminar on the role of Renewable and Alternative Energy Sources for National Development, , 19-20 December, 2003.
3. C.M.R. Ferdous, M. Shahidul Islam, M.Minul Islam, M.M. Asraful Alam A.N.M. Mizanur Rahman, "Solar Photovoltaic Technology And 911爆料," Published in seminar on the role of Renewable and Alternative Energy Sources for National Development, , 19-20 December, 2003.
2. M. Syed Ali, M. Shahidul Islam, M.M. Ashraful Alam, Sobahan Mia, "Formation of Pollution from the Transports and Vehicles and the Regulation Policy for Emission Control And Environmental Issue," Published in seminar on the role of Renewable and Alternative Energy Sources for National Development, , 19-20 December, 2003.
1. M. M. Islam, K. Khan, Dr. M. N. Ali, M. S. Islam, "An Investigation on the Raw Materials and Products of the Briquetting Machine," Published in seminar on the role of Renewable and Alternative Energy Sources for National Development, , 19-20 December, 2003.

Education

Doctor of Engineering
Nagaoka University of Technology (NUT), Japan
Result: Passed

Thesis: Analysis of 3D Intensity of Singular Stress Fields in Two-phase Transversely Isotropic Piezoelectric Bonded Joints

Remarks:
Masters of Engineering
Nagaoka University of Technology (NUT), Japan
Result: Passed

Thesis: Stress Singularity Analysis in 3D-Transversely Isotropic Piezoelectric Bimaterials

Remarks:
Bachelor of Science in Engineering (B.Sc. Engineering)
Khulna University of Engineering & Technology (KUET), 911爆料
Result: 1st Class

Group: Mechanical Engineering(2001)
Remarks:
Higher Secondary Certificate (HSC)
Noapara College, Abhaynagar, 911爆料
Result: 1st Class

Group: Science(1995)
Remarks:
Secondary School Certificate (SSC)
Rajghat Jafarpur Secondary School, 911爆料
Result: 1st class

Group: Science(1993)
Remarks:

Scholarship and Award

Excellent Paper Award
IASTEM International Conference, Tokyo, Japan. Paper Title: Evaluation of Stress Field at the Vertex of the Interface in Three-Dimensional Dissimilar Material Joints.
Best Paper Award
4th International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE 2016). Paper Title: Stress Analysis in 3D Two-phase Transversely Isotropic Piezo-ceramic Bi-material using BEM
Best Paper Award
International Conference on 911爆料 Information and Communication Technology (EICT-2013). Paper Title: Numerical Investigation of Singularity at a Vertex in 3D Transversely Isotropic Piezoelectric Bonded Joints by FEM
Japanese Government (Monbukagakusho) Scholarship
International Graduate Course for Continuing Professional Development which is for researchers and engineers from developing countries to provide the opportunity of advanced study, research and experience in engineering fields so that they can contribute to the industrial development of their home countries.
Merit Order Scholarship
Merit order scholarship through out the 4 years study of B.Sc. Engineering.

Research

1. Analysis of intensity of singularity at a vertex in 3D transversely isotropic piezoelectric bonded joints by boundary element method.
2. Analysis of order of singularity in 3D transversely isotropic piezoelectric and elastic bonded joints by finite element method.

The Intensity of singularity for the bimaterial joint can be evaluated by the Boundary Element Method (BEM) and the order of the stress singularity for the bimaterial joint can be evaluated by the eigen analysis based on Finete Element Method (FEM). In our present investigation, we use 3D transversery isotropic piezoelectric and elastic bonded structure. The influence of the electric field should be considered for the deformation of the piezoelectric material. We analyze the optimal material combination such that the intensity of singularity and order of the stress singularity can be minimized.

Academic Experience

Associate Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna Jul 06, 2014 to Sep 05, 2016
Working Area: Solid Mechanics and Material Engineering
Professor (Grade- 3)
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna Sep 06, 2016 to Dec 07, 2020
Working Area: Solid Mechanics and Material Engineering
Assistant Professor
Department of Mechanical Engineering
Khulna University of Engineering & Technolgy (KUET), Khulna May 09, 2006 to Jul 05, 2014
Working Area: Solid Mechanics and Material Engineering
Lecturer
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna Mar 09, 2003 to May 08, 2006
Working Area: Solid Mechanics and Material Engineering
Executive
Power Plant
Beximco Textiles Limited, Dhaka Nov 02, 2002 to Mar 08, 2003
Working Area: Engineering
Maintenance Engineer
Utility and Service
Dhaka Tobacco Industry, Dhaka Sep 01, 2002 to Nov 01, 2002
Working Area: Engineering
Assistant Engineer
Mechanical Engineering
Prasthapana Limited, Dhaka Apr 01, 2002 to Aug 31, 2002
Working Area: Engineering
Consultancy, Research & Testing Officer
CRTS, Department of Mechanical Engineering
Khulna University of Engineering & Technolgy (KUET), Khulna Mar 09, 2003 to Jan 01, 1970
Working Area: Consultancy, Research & Testing
Chairman, CRTS-ME
CRTS, Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna-9203 Jul 01, 2019 to Jun 30, 2021
Working Area: Consultancy, Research & Testing
Member, CASR
Committee for Advance Studies and Research (CASR)
Khulna University of Engineering & Technology (KUET), Khulna 9203 Jan 20, 2023 to Jan 01, 1970
Working Area: Advance Studies and Research
Organizing Secretary of ICMIEE 2018
Faculty of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna-9203 Feb 01, 2018 to Dec 31, 2018
Working Area: International Conference
Secretary, CRTS-ME
CRTS, Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna-9203 Jan 01, 2017 to Dec 31, 2018
Head, ME
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna-9203 Jun 29, 2020 to Jun 28, 2022
Working Area: Head of the Department
Member, Officer Selection Committee
Officer (Grade-4 to Grade-10)
Khulna University of Engineering & Technology (KUET), Khulna-9203 Mar 13, 2022 to Jan 01, 1970
Member of the Syndicate
The University Syndicate
Khulna University of Engineering & Technology (KUET), Khulna-9203 Jan 20, 2023 to Jul 31, 2023
Dean, Faculty of ME
Faculty of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna-9203 Jan 20, 2023 to Jan 01, 1970
Member, CASR
Committee for Advance Studies and Research (CASR)
Khulna University of Engineering & Technology (KUET), Khulna-9203 Dec 01, 2019 to Mar 12, 2022
Working Area: Advance Studies and Research
Professor (Grade- 2)
Department of Mechanical Engineering
Khulna University of Engineering & Technology (KUET), Khulna Dec 08, 2020 to Jan 01, 1970
Responsibility: Engineering
VC (Acting)
KUET
Khulna University of Engineering & Technology (KUET), Khulna Aug 06, 2024 to Aug 11, 2024
Member, Academic Council
KUET
Khulna University of Engineering & Technology (KUET), Khulna Jul 06, 2014 to Jan 01, 1970
Chairman, Executive Committee of ME Faculty
Executive Committee (Faculty of ME)
Khulna University of Engineering & Technology (KUET), Khulna Jan 20, 2023 to Jan 01, 1970
Chairman, LAC
Local Admission Committee (LAC)
CKRUET Admission Test 2022 Feb 15, 2023 to Dec 31, 2023
Member, LAC
Local Admission Committee (LAC)
CKRUET Admission Test 2023, Khulna Jan 03, 2024 to Jan 01, 1970
Member, CAC
Central Admission Committee (CAC)
CKRUET Admission Test 2022 and 2023, Khulna Feb 15, 2023 to Jan 01, 1970
Member, Disciplinary Committee
Disciplinary Committee of KUET
Khulna University of Engineering & Technology (KUET), Khulna Jan 20, 2023 to Jan 01, 1970
Member, Library Committee
Library Committee of KUET
Khulna University of Engineering & Technology (KUET), Khulna Jun 29, 2020 to Jun 28, 2022

Professional Membership

Fellow (F-11156)
Institute of Engineers 911爆料 (IEB)

Course Conduct

ME 1200: Mechanical Engineering Drawing I (Credit: 1.50) Fundamental principles and applications of Orthogonal projection; Visibility, Angle problem; Oblique projection; Isometric projection; Auxiliary projection, Orthographic and auxiliary projection from pictorial views; pictorial projection from orthographic views, Development of objects. Descriptive Geometry: Projection, methods of transferring projection, practical application of descriptive geometry.

ME 1221: Computer and Computer Languages (Credit: 4.00) General Discussion about computer and its components, discussion about programming languages and software packages. FORTRAN Fundamental of FORTRAN Language; Standard input/output statement and its field width; real and integer variables; built in mathematical functions; arithmetic assignment statement; conditional and unconditional transfer; flow chart, relational expressions, controlling a loop, logical and arithmetic IF statement, GO TO statement; DO loop, necessity of the CONTINUE statement, Nested DO loop, Implied DO loop, Arrays and subscripted variables, DIMENSION statement, Multidimensional arrays, Functions and Subroutines, program development and application; Sorting, Searching, solution of certain equations, String variables and constants; Logical constants and logical variables. Special topics: IMPLICIT statement, double precision, COMMON statement, OPEN statement, CLOSE statement, REWIND Statement, BLOCK DATA statement, EQUIVALENCE statement. ME 1222 Sessional on ME 1221 (Credit: 0.75) Programming practice with FORTRAN languages based on the theory of ME 1221.

ME 2105: Thermodynamics (Credit: 4.00) Introduction: Macroscopic and Microscopic points of view; Definition of Thermodynamic terms; Heat , Work and their path dependence. Ideal Gas: Definition and suitability as thermodynamic fluid; Equation of state; various thermodynamic processes. Specific heats; Internal energy; Enthalpy. Laws of Thermodynamics: Statement and their corollaries, criterion of reversibility and irreversibility, entropy, Gibbs function and Helmohtzs function, Maxwellâ€™s relations. Air Standard Cycles: Carnot cycle, Otto cycle, Diesel cycles, Dual cycle, Stirling cycle, Erricsion cycle, Joule cycle, Brayton cycle, and their applications; Representation of various cycles on p-V and T-s planes; Cycle efficiency; Air compressors and blowers. Vapor Power Cycles: Carnot cycle, Rankine cycle; Reheat cycle, Regenerative cycle; Binary cycle; Introduction to combined cycle. Mixture of Gases and Vapors: Mixture of ideal gases, gravimetric and volumetric analysis; Daltonâ€™s law of partial pressure, volume and entropy of gaseous mixture; Isentropic process with gaseous mixtures; Specific humidity, relative humidity, dew point, dry and wet bulb temperatures; Adiabatic saturation; Construction of psychometric chart and its uses. Fuels and Its Properties: Classification of fuels; Formation of coal and petroleum fuel, grading of coal; Calorific value of fuels and its measurement; Freezing point, Flash point, Boiling point, Viscosity of liquid fuels; Modern development of solid, liquid and gaseous fuels, Nuclear fuels. ME 2106 Sessional on ME 2105 (Credit: 0.75) Experiments based on the theory of ME 2105.

ME 2211: Mechanics of Solid (Credit: 4.00) Stress and Strain: Introduction; Analysis of internal forces; Tensile, compressive, bearing and shearing stresses; Stresses in thin-walled pressure cylinder; Stress-strain diagram; Axial, biaxial and triaxial deformations; Statically indeterminate members; Thermal stresses. Statically Determinate Beams: Introduction; Different types of loading and supports; Shear force and bending moment diagrams; Stresses in beams, flexure formula, economic sections, shearing stresses in beams, general shear formula; variation of shearing stresses in beams; Deflection of beams, double integration, area-moment and superposition methods; Reinforced beams, design of reinforced concrete beams. Statically Indeterminate Beams: Introduction; Propped and restrained beams; Design of restrained beams; Continuous beams; Derivation of the three-moment equation and its applications; Determination of support reactions of continuous beams; Torsion: Introduction; Torsion formula; Angle of twist; Shaft couplings and helical springs; Analysis and design of circular shaft. Combined Stresses: Introduction; Combined axial and bending stresses; Kern of section; Stress at a point; Analytical method for the determination of stresses on oblique sections; Mohrâ€™s circle and its application to combined loadings; Transformation of strain components; Strain rosette; Columns: Introduction; Critical load, slenderness ratio and classification of columns; Eulerâ€™s formula, empirical formulas and secant formula. Riveted and Welded Connections: Introduction; Stresses in riveted joints; Eccentrically loaded riveted and welded connections. ME 2212 Sessional on ME 2211 (Credit: 0.75) Experiments based on the theory of ME 2211.

ME 3121: Numerical Method (Credit: 3.00) Interpolation: Newtonâ€™s formulae for forward and backward interpolation, Lagrangeâ€™s interpolation method, Stirlingâ€™s interpolation method and Besselâ€™s interpolation method. Solution of Nonlinear Algebraic Equation: Iterative method, Regula falsi method, Newton-Raphson method; Graphical presentation and significance of the above methods; Initial approximation and convergence criteria, Checking for convergence. Solution of Linear Algebraic Equation: Iterative method, Matrix inversion method, Gauss elimination and pivoting method, Triangular factorization method. Numerical Differentiation: Expansion of a function by Taylorâ€™s series; Forward difference formula, Central difference formula and Backward difference formula, their error calculation and application. Graphical method of differentiation; Partial differentiation. Numerical Integration: General formula for equidistant ordinates, Trapezoidal rule, Simpsonâ€™s rule, Weddleâ€™s rule and calculation of their error; Graphical integration. Solution of Differential Equations: Introduction to differential equation, geometric interpretation; Eulerâ€™s method, Taylor series method, Runge-Kutta method of different order, Predictor-Corrector methods, their application and error analysis. Solution of Partial Differential Equations (PDE): Introduction to differential equation, geometric interpretation; Definition of Elliptic, Parabolic and Hyperbolic PDE and their solution by finite difference technique, Dâ€™Alembertâ€™s solution, Crank-Nicholson method, Iterative method. Calculation of residuals and test of accuracy. Curve Fitting: Linear regression and correlation, Least squares estimators, confidence limits and test of significance. Eigen Values and Eigen Vectors: Introduction and concept of Eigen value and Eigen vector. Solution of homogeneous linear system, estimation of the size of Eigen values. ME 3122 Sessional on ME 3121 (Credit: 0.75) Computer applications on the problems based on the theory of ME 3121.

ME 4105: Applied Thermodynamics (Credit:4.00) Gas Turbines: Open and closed cycle gas turbines and their performances; Modifications of simple gas turbines cycle; reheat, regenerative, inter-cooling etc. Jet propulsion and rocket propulsion; propellants and their criteria; Air-Fuel Ratio, Specific Fuel Consumption. Efficiency of propulsive units; Boosting. Turbo-machinery: Steam turbines, Impulse and reaction type, convergent and divergent nozzles theory and design of nozzles; Stage efficiency, degree of reaction. Performance of steam turbines. Compounding of turbines, optimum velocity ratio, reheat factor and condition line, loses in steam turbines, steam turbine governing. Steam Condensers. Internal Combustion Engines: Classification of engines, Engine testing, types of tests, measurement of torque, speed, fuel and air consumption etc.; Heat balance; Performance factors, indicator diagram, Indicated power, brake power, mep, specific fuel consumption; thermal, mechanical and volumetric efficiencies; performance curves, factors limiting performance of IC engines; Fuel metering of SI and CI engines; reaction rate and flame propagation, auto ignition and chemical reaction; knocking and detonation in SI and CI engines; fuel additives; Combustion chamber design of SI and CI engines; Scavenging and Supercharging; ME 4106 Sessional on ME 4205 (Credit: 0.75) Experiments based on the theory of ME 4105.

Supervision

Supervision of Thesis of Postgraduate Students:

Master Degree/Ph.D	Years of Award	Student’s Name	Supervisor/Co-supervisor(s)
M.Sc. Engineering (ME)	March, 2016	A. H. M. Abdullah Al Mamun	Supervisor
M.Sc. Engineering (ME)	December, 2016	Debasish Adhikary	Supervisor
M.Sc. Engineering (ME)	September, 2021	Somnath Somadder	Supervisor
M.Sc. Engineering (ME)	March, 2023	Md. Tasnim Rana	Supervisor
M.Sc. Engineering (ME)	June, 2024	Jasim Ahmed Chowdhury	Supervisor

Examiner for Evaluating the PhD Thesis:

Year	Degree	Name of the University
2024	PhD	Dhaka University of Engineering & Technology (DUET), 911爆料
2023	PhD	Dhaka University of Engineering & Technology (DUET), 911爆料
2022	PhD	Easwari Engineering College, Chennai, Tamil Nadu, India
2018	PhD	Queensland University of Technology (QUT), Australia
2015	PhD	Alagappa Chettiar Government College of Engineering and Technology, India

Student Corner

Mechanical Engineering Drawing (ME-1200) <br>