911±¬ÁÏ

Department of Mechanical Engineering

Avatar

Somnath Somadder

Assistant Professor
+880-41-769468~75, Ext-8407
[email protected]
Research Interest: Additive Manufacturing Multiscale Modeling Numerical analysis of functionally graded materials Impact Dynamics Solid Mechanics and Materials Enginerring

Print Profile

Bio

kuet

Publication

Journal
7. Chanda,D. , Islam,D. M. A. , Hasib,D. M. A. and Somadder,S. (2022) , " NUMERICAL MODELING OF LOW-VELOCITY IMPACT ON COMPOSITE LAMINATES," MIST International Journal of Science and Technology
Under Review
6.
5. Somadder,S. ,Das,P. and Islam,M. A. (2023) , " CHARACTERISTICS OF STRESS DISTRIBUTION OF A MULTI LAYERED CYLINDRICAL PRESSURE VESSEL ," Journal of Mechanical and Energy Engineering, Koszalin University of Technology, pp.1-6
4.
3. Das,P. , Islam,M. A. , Somadder,S. and Hasib,a. M. A. (2022) , " Analytical and numerical analysis of functionally graded (FGM) axisymmetric cylinders under thermo-mechanical loadings," Materials Today Communications, ELSEVIER, vol33
2. Somadder,S. and Islam,M. S. (2022) , " Effect of Adhesive Layer Thickness and Slant Angle on Piezoelectric Bonded Joints," Journal of Mechanical Engineering, Universiti Teknologi MARA, Shah Alam, Malaysia, vol19, no.2, pp.251-268
1. Somadder,S. and Islam,M. S. (2018) , " “Stress Analysis of a Thick Walled Orthotropic Bonded Cylinder under Pressure and Temperature by Using FEMâ€, ," International Journal of Mechatronics and Manufacturing Technology, vol3, no.1, pp.1-28
Conference
3. Sarker,R. ,Islam,M. S. and Somadder,a. S. (2022) , "Numerical Investigation of Stress Field Near the Vertex of a 3D Three Layer Piezoelectric Bonded Joint," International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2022)
2. Somaader,S. and Islam,M. S. (2020) , "Effect of Slant Angle on Piezoelectric Bonded Joint," 6th International Conference on Mechanical Industrial & Energy Engineering
1. Somadder,S. and Islam,M. S. , "“Stress Analysis of a Cylinder Subjected to Thermo-mechanical Loads by Using FEMâ€," 4th International Conference on STRUCTURE, PROCESSING AND PROPERTIES OF MATERIALS 2018

Education

PhD in Mechanical Engineering
Florida International University,USA () Student Type: Full Time, Achievement: Presidential Doctoral Fellow

B.Sc. in Mechanical Engineering
Khulna University of Engineering & Technology,911±¬ÁÏ (2018) Group: Mechanical Engineering, Student Type: Regular, Merit Position: 2nd , Achievement: Honors

H.S.C (Higher Secondary Certificate)
Govt. Syed Hatem Ali College,911±¬ÁÏ (2013) Group: Science, Student Type: Regular, Achievement: Board Scholarship

S.S.C (Secondary School Certificate)
Barisal Zilla School,911±¬ÁÏ (2011) Group: Science, Student Type: Regular,

M.Sc. in Mechanical Engineering
Khulna University of Engineering & Technology,911±¬ÁÏ (2018-2021) Student Type: Part Time,

Scholarship and Award

  • Deans Award

    Four Deans Awards for securing CGPA of 3.75 or above in each session

  • Honors

    The honors is given to the students having CGPA 3.75 or above.

  • Education Board Scholarship (Barisal Board)

    Talent Pool Scholarship in class five, General Grade Scholarship in class eight and in HSC exam.

Research

  • Additive Manufacturing
    • Additive Manufacturing (AM) is defined as ―the process of joining materials to make objects from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies, such as traditional machining.
  • Multiscale Modeling
    • Multiscale modeling refers to a style of modeling in which multiple models at different scales are used simultaneously to describe a system. The different models usually focus on different scales of resolution.Multiscale modeling research focusses on developing comprehensive multiphysics framework, bridging length scales from atomistic to the structural scale, including geometric and material variability, and damage for accurate prediction of material behavior and failure under service conditions for a wide range of materials such as polymer matrix composites (PMC), ceramic matrix composites (CMC), metallic alloys and superalloys.
  • Numerical analysis of functionally graded materials
    • A functionally graded material (FGM) is a two-component composite characterised by a compositional gradient from one component to the other. In contrast, traditional composites are homogeneous mixtures, and they therefore involve a compromise between the desirable properties of the component materials.
  • Impact Dynamics
    • Low velocity impact on composite materials
  • Solid Mechanics and Materials Enginerring
    • Analysis of stress singularity fields in 3D transversely isotropic piezoelectric and elastic bonded joints by finite element method.

Experience

Service Records
  • Assistant Professor
    Department/Section: Department of Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 04-Jul-2025 to 04-Jul-2025
    Responsibility: Teaching, Paper Setter, Examiner and Research

  • Consultancy, Research & Testing Officer
    Department/Section: CRTS, Department of Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 04-Jul-2025 to 04-Jul-2025
    Responsibility: Consultancy, research and performing various test.

  • Lecturer
    Department/Section: Department of Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 04-Jul-2025 to 04-Jul-2025
    Responsibility: Teaching, Paper Setter, Examiner and Research

Professional Body Membership
  • Institution of Engineers, 911±¬ÁÏ

    Member Type: Associate Member
    Member ID: A-24667

Teaching and Supervision

#Course Conduction
Supervisor of (fourth year) thesis student 1. 1705002 2. 1705081 Supervisor of (third year) project student 1. 1805053 2. 1805094
#Course Supervision

1.Kinematics and Dynamics of Machinery

  Department: Energy Science and Engineering

  Batch: 2K16

  Course No.: ME 2213

  Credit: 3.0

  Status: Finished

 

 

2.Sessional ME 2213

  Department: Energy Science and Engineering

  Batch: 2K16

  Course No.: ME 2214

  Credit: 0.75

  Status: Finished

 

 

3.Machine Design I

  Department: Mechanical Engineering

  Batch: 2K16

  Course No.: ME 3117

  Credit: 3.0

  Status: Finished

 

 

4.Sessional on ME 3117

  Department: Mechanical Engineering

  Batch: 2K16

  Course No.: ME 3118

  Credit: 3.0

  Status: Finished

 

 

5.Fluid Mechanics

  Department: Energy Science and Engineering

  Batch: 2K17

  Course No.: ME 2115

  Credit: 3.0

  Status: Finished

 

 

6.Sessional on ME 4113

  Department: Mechanical Engineering

  Batch: 2K15

  Course No.: ME-4114

  Credit: 0.75

  Status: Finished

 

 

7.Machine Shop

  Department: Chemical Engineering

  Batch: 2K18

  Course No.: MES 1130

  Credit: 1.50

  Status: Finished

 

 

8.Machine Shop

  Department: Materials Science and Engineering

  Batch: 2K17

  Course No.: MES 2110

  Credit: 0.75

  Status: Finished

 

 

 

9.Kinematics and Dynamics of Machinery

  Department: Energy Science and Engineering

  Batch: 2K17

  Course No.: ME 2213

  Credit: 3.0

  Status: Finished

 

10.Sessional ME 2213

   Department: Energy Science and Engineering

   Batch: 2K17

   Course No.: ME 2214

   Credit: 0.75

   Status: Finished

 

 

11.Manufacturing Process

   Department: Mechatronics Engineering

   Batch: 2K18

   Course No.: ME 1231

   Credit: 3.00

   Status: Finished

 

 

12.Sessional on Manufacturing Process

   Department: Mechatronics Engineering

   Batch: 2K18

   Course No.: ME 1232

   Credit: 1.50

   Status: Finished

 

13.Sessional on Basic Mechanical Engineering

   Department: 911±¬ÁÏ Engineering

   Batch: 2K18

   Course No.: ME 1204

   Credit: 0.75

   Status: Finished

 

 

14.Machine Design I

   Department: Mechanical Engineering

   Batch: 2K17

   Course No.: ME 3117

   Credit: 3.0

   Status: Finished


15.Sessional on ME 3117

  Department: Mechanical Engineering

  Batch: 2K17

  Course No.: ME 3118

  Credit: 3.0

  Status: Finished


16.Engineering Mechanics

   Department: Mechtronics Engineering

   Batch: 2K18

   Course No.: ME 2131

   Credit: 3.0

   Status: Finished

 

 

17.Mechanical Equipment in Building

   Department: Architecture

   Batch: 2K17

   Course No.: ME 3125

   Credit: 3.0

   Status: Finished

 

 

18.Engineering drawing and design

   Department: Biomedical Engineering

   Batch: 2K19

   Course No.: ME 1116

   Credit: 1.50

   Status: Finished

 

 

19.Simulation

   Department: Mechanical Engineering

   Batch: 2K16

   Course No.: ME 4122

   Credit: 0.75

   Status: Finished

 

 

20.Workshop practice

   Department: Textile Engineering

   Batch: 2K18

   Course No.: MES 2120

   Credit: 1.50

   Status: Finished

 

 

21.Engineering Graphics

   Department: Chemical Engineering

   Batch: 2K18

   Course No.: ME 2130

   Credit: 1.50

   Status: Finished


22.Machine Design II

   Department: Mechanical Engineering

   Batch: 2K17

   Course No.: ME 3217

   Credit: 3.00

   Status: Finished

 

23.Sessional on ME 3217

    Department: Mechanical Engineering

    Batch: 2K17

    Course No.: ME 3218

    Credit: 0.75

    Status: Finished

 

 

24.Solid Mechanics and Machine Design

    Department: Textile Engineering

    Batch: 2K18

    Course No.: ME 2221

    Credit: 3.00

    Status: Finished

 

 

25.Sessional on ME 2221

    Department: Textile Engineering

    Batch: 2K18

    Course No.: ME 2222

    Credit: 3.00

    Status: Finished.



26.Fatigue, Creep & Fracture

    Department: Mechanical Engineering

    Batch: Post Graduate (January 2022)

    Course No.: ME 6311

    Credit: 3.00

    Status: Running


27.Machine Design I

   Department: Mechanical Engineering

   Batch: 2K18

   Course No.: ME 3117

   Credit: 3.0

   Status: Finished


28.Sessional on ME 3117

  Department: Mechanical Engineering

  Batch: 2K18

  Course No.: ME 3118

  Credit: 3.0

  Status: Finished


29.Simulation

   Department: Mechanical Engineering

   Batch: 2K16

   Course No.: ME 4122

   Credit: 0.75

   Status: Finished



30.Engineering Mechanics

   Department: Mechatronics Engineering

   Batch: 2K19

   Course No.: ME 2131

   Credit: 3.0

   Status: Finished


Last Update: 10-Jul-2024