1. Prof. Dr. Mohammad Abdul Jalil, "," Denim and Washing Technology , Granthanir Prokashoni, vol. 1, 2016.
International Journal
25. Mohammad Abdul Jalil, Rabindra Chandra Sinha and Mubarak Ahmed Khan, "Study on creep, fatigue and shear strength properties of Pineapple Leaf Fiber reinforced high impact polystyrene (HIPS) composites.," 911±¬ÁÏ Journal of Jute and Fiber Research (BJJFR), , vol. 3, no: 1, January 2013.
24. Mohammad Abdul Jalil, Rabindra Chandra Sinha, A.K.M Mahabubuzzaman And Md. Rokonuzzaman, "A comparative study of quality control of fine jute yarn conventional drawing method Vs modified drawing method.," International Journal of Textile and Fashion Technology(IJTFT), Vol 1, Issue 1,pp1-10, 2011, , .
23. Abdur Razzak, Mohammad Abdul Jalil And Md.Rokonuzzaman, "Effect of spindle speed of ring frame on yarn quality.," Journal of Science and Technology Vol: 2 No: 2, pp 149-151,May-2012 ISSN NO.: 2079-472X, , .
22. Md.Rokonuzzaman, Mohammad Abdul Jalil, Abdur Razzak, S.M.Farhana Iqbal And Shib Shankar Chakraborty, "Effect of different processes on rotor yarn quality.," Journal of Science and Technology Vol: 2 No: 1,pp 19-23, January-2011 ISSN NO.: 2079-472X, , .
21. Md. Milon Hossain, Mohammad Abdul Jalil, Joykrishna Saha, Md. Moznu Mia And Md. Mizanur Rahman, "Impact of various yarn of different fiber composition on the dimensional properties of different structure of weft knitted fabric.," International Journal of Textile and Fashion Technology(IJTFT), , vol. 2, no: 1, pp. 33-34, May 2011.
20. Md, Millon Hossain, Rumpa Karmaker, Sudipta Bain, Mohammad Abdul Jalil And Joykrishna Saha, "Investigation of influence of twill structures on jute-cotton union fabric physical properties," IJASETR 1 (2) pp 60-72, April 2012. ISSN:1839-7239, , .
19. Mohammad Abdul Jalil, Rabindra Chandra Sinha And A.K.M.Mahabubuzzaman, "Study on the physical and structural properties of jute-PALF blended apron draft ring spun yarn.," Journal of Textile and Apparel Technology and Management, NC State University, USA (Submitted), , .
18. Mohammad Abdul Jalil, Rabindra Chandra Sinha And A.K.M.Mahabubuzzaman , "Analysis of physico-mechanical properties of jute-PALF union fabrics.," Jahangirnagar University Journal of Science (JUJS), , vol. 31, no: 3, pp. 45-56, June 2013.
17. Mohammad Abdul Jalil, Rabindra Chandra Sinha, And A.K.M.Mahabubuzzaman , "Study on physico-mechanical properties of Pineapple Leaf Fiber (PALF) and its spinning performance.," Journal of Engineering and Applied Science (JEAS), , vol. 2, no: 2, pp. 23-27, December 2012.
16. Sumon Mir, Md. Milon Hossain, Mohammad Abdul Jalil and Shohan Parvez , "Effect of Enzyme Wash on Denim Garments.," Journal of Textile Engineers and Technologists, 911±¬ÁÏ, , vol. 2, no: 2, pp. 21-28, June 2013.
15. Mohammad Abdul Jalil, Md. Rokonuzzaman , Abdur Razzaque, A.K.M.F. Haque and N. Afroz, "Effect of delivery speed on winding machine on yarn hairiness.," Journal of innovation and development strategy (JIDS). ISSN NO:1997-2571, , vol. 5, no: 1, pp. 6-8, April 2011.
14. Mohammad Abdul Jalil, Milon Hossain And Shohan Pervaz , "Importance of Sample Making in Apparel Merchandising.," Textile Today, , vol. 2, no: 1, pp. 65-66, April 2013.
13. M. Mizanur Rahman, Abu Shaid, Mohammad Abdul Jalil And M. Bakhtair Hossain, "Semi Biological Effluent Treatment In Textile Waste Water Management," International Journal of Engineering and Technology (IJET), , vol. 6, no: 1, pp. 404-409, March 2009.
12. Dr. Mohammad Abdul Jalil, Md. Tanjim Hossain, Md. Mazharul Islam, Moshiur Rahman & Prashanta Kumar Roy, "To Estimate the Standard Minute Value of a Polo-Shirt by Work Study," Global Journal of Researches in Engineering: G Industrial Engineering, , vol. 15, no: 2, 2015.
11. MOG Miazi, AKM Mahabubuzzaman, M Maniruzzaman, & Mohammad Abdul Jalil,, "Effect of Twist on Productivity of Fine Jute Yarn Produced by Modified ring Spinning Machine," Journal of Innovation, Development and Strategy, , pp. 14-16, 2009.
10. Nasir Uddin, Farhana Afroz, Mohammad Abdul Jalil, "Retrofitting of Simple Mechanical Compacting Device (RoCoS) on Conventional Ring Spinning Machine for Improving Yarn Quality.," European Scientific Journal, , vol. 11, 2015.
9. Md. Tanjim Hossain, Md. Mazharul Islam, Mohammmad Abdul Jalil, Md. Nasir Uddin & Ayesha Siddika., "The Effect of Different Mordants on Dyeing of Cotton Fabric with Henna.," International Journal of General Engineering and technology (IJGET), ISSN 2278-9928, , vol. 4, no: 4, pp. 1-8, 2015.
8. Md. Mazharul Islam, Md. Mahbubul Haque, Lal Mohan Baral, Mohammmad Abdul Jalil, "Impact of Different Factors on Apparel Pattern Grading Accuracy. ," Journal of Textile and Apparel, Technology and Management, NC State University, USA. ISSN: 1533-0915 (Submitted), , .
7. Dr. Mohammad Abdul Jalil, Dr. Md. Ismail Hossain, Md. Nasir Uddin & Md. Mazharul Islam, "Investigation of physico-mechanical properties of Pineapple Leaf Fiber using a fuzzy-logic expert system," The Journal of the Textile Institute, UK (Submitted), , .
6. Mohammad Abdul Jalil, Md Shohan Parvez, Ayesha Siddika, & Md Moshiur Rahman, "Characterization and Spinning Performance of Pineapple Leaf Fibers: An Economic and Sustainable Approach for 911±¬ÁÏ," Journal of Natural Fibers Taylor & Francis, , pp. 1-12, 04 November 2019.
5. Md. Mazharul Islam, Mohammad Abdul Jalil, Md. Shohan Parvez & Md. Mahbubul Haque, "Assessment of the Factors Affecting Apparel Pattern Grading Accuracy: Problems Identification and Recommendations," Tekstilec, 2020, 63(3), 166–184 | DOI: 10.14502/Tekstilec2020.63.166-184, , .
4. Md. Abdul Alim , Kaniz Fatima Mishfa and Mohammad Abdul Jalil , "Surface modification of conductive PEDOT-PSS coated Jute yarns with silicone resin," Autex (Submitted), , .
3. Md. Moniruzzaman, Mohammad Abdul Jalil, Md. Ismail Hssain and M. Zamman, "Characterization of chemical-treated and gamma irradiated pineapple leaf fabric/epoxy composites: surface structure and physico-mechanical properties," Tekstil ve Muhendis (Journal of Textiles and Engineer) accepted, , .
2. Abbas Ahmed , Mohammad Abdul Jalil , Md. Milon Hossain , Md. Moniruzzaman, Bapan Adak, Samrat Mukhopadhyay, Md. Shohan Parvez & M. Tauhidul Islam, "PEDOT: PSS and Graphene-Clad Smart Textile Based Wearable Electronic Joule Heater with High Thermal Stability," Chemistry of Materials-C (RCS) Under review, , .
1. Mohammad Abdul Jalil , Md. Moniruzzaman, Md. Shohan Parvez and Ayesha Siddika, "A Novel Approach for Pineapple Leaf Fiber Processing and Utilization Using Existing Machines," Cellulose (Springer Journal) Under review, , .
International Conference
4. Tamal Krishna Paul, Md. Shohan Parvez, Mohammad Abdul Jalil and Md. Ismail Hossain, "A prognostic approach based on fuzzy logic methodology to speculate yarn quality ratio in Jute spinning industry," ICMIEE 2020, KUET, , 19-21 December 2020.
3. Md. Masud Kaisar Sajib, Md. Shohan Parvez and Mohammad Abdul Jalil, "Developing pillow speaker using conductive thread for E-textiles applications," International Conference on Mechanical, Industrial and Energy Engineering-2019,Faculty of Mechanical Engineering, RUET, Rajshahi., , 17-19 December 2019.
2. MD. Milon Hossain, A.H.M Fazle Elahi, Shahida Afrin, Mubarak A. Khan and M. A. Jalil, "Mechanical property evaluation of PALF/polyester bio-composite," 11th International Conference of Mechanical Engineering-2015, BUET, , 18-20 December 2015.
1. Mohammad Abdul Jalil, A.K.M. Mahabubuzzaman, Md. Nasir Uddin, Md. Tanjim Hossain and Md. Moshiur Rahman, "Physio-Mechanical Properties of Pineapple Leaf Fiber and its Spinning Performance," 11th International Conference of Mechanical Engineering-2015, BUET, , 18-20 December 2015.
National Conference
1. A.K.M Mahabubuzzaman, Md. Osman Ghani Miazi, Md. Asaduzzaman and M.A. Jalil, "Enrichment of Yarn Quality by the change of Drafting Zone of Drawing Machines," National Conference on Physics for Development, , 10-11 February 2011.
Education
Doctor of Philosophy (04) Jahangirnagar University, 911±¬ÁÏ Result: Degree Awarded
Remarks:
B.Sc. in Textile Engineering 911±¬ÁÏ Textile University, Dhaka Result: Class-First
Group: () Remarks:
Higher Secondary Certificate Agailjhara College , Result: Division-First
Group: () Remarks:
Secondary School Certificate Rajapur Pilot High School , Result: Division-First
Group: () Remarks:
Scholarship and Award
Recipient of University Grand Commission (UGC) fellowship in 2007 for 4 years to conduct PhD at Jahangirnagar University, Saver, Dhaka, 911±¬ÁÏ Project entitled Effect of privilege parameters of the Jute spinning machine on the physical and structural properties of the fine Jute yarn.
Research
Academic Experience
Production Officer Opex Group, Dhaka
Working Area: Apparel
Lecturer Yarn Manfacturing
Textile Institute, Noakhali, Noakhali
Superintendent Textile Institute, Jhalokathi, Jhalokathi
Assistant Profesor Yarn Manfacturing
Mawlana Bhashani Science and Technology University, Santosh, Tangail-1902
Associate Professor Textile Engineering
Mawlana Bhashani Science and Technology University, Santosh, Tangail-1902
Working Area: Yarn Manufacturing Engineering
Professor Textile Engineering
Khulna University of Engineering & Technology, Khulna-9203, bangladesh
Working Area: Yarn Manufacturing Engineering
Professional Membership
Associate Member The Institution of Textile Engineers and Technologist (ITET), 911±¬ÁÏ
Associate Member The Institution of Engineers (IEB), 911±¬ÁÏ
Course Conduct
Supervised Undergraduate Students for Project / Thesis Work.
Supervision
THEORY COURSES
Yarn Manufacturing Engineering- IV (TE 4201)
Nonwoven and Nanotechnology in Textiles(TE 4245)
Machine Maintenance, Materials Handling and Safety (TE 4225)
KHULNA UNIVERSITY OF ENGINEERING & TECHNOLOGY
