KUET

Bio

Alberuni Aziz received B.Sc. Engineering degree in Textile Engineering and M.Sc. Engineering degree in Industrial Engineering and Management from Khulna University of Engineering & Technology (KUET). Currently, he is pursuing PhD at Khulna University of Engineering & Technology (KUET). His research interests include garment production and Quality Optimization, Textile Materials Science, Textile Composite Materials, and Industry 4.0. He is an Assistant Professor of the Department of Textile Engineering at Khulna University of Engineering & Technology, Khulna, 911爆料.

Publication

Journal

7. A. Aziz, F. Parvin and M. K. Hossain, "An Investigation into the Preparation and Evaluation of the Physio-Mechanical Properties of Glass-Cotton, Glass-Jute, and Glass-Banana Fiber-Reinforced Epoxy Composite Materials," BenchCouncil Transactions on Benchmarks, Standards and Evaluations , Elsevier, vol. 5, no.2, pp.100218, 2025 .

Q1, First and Corresponding Author

6. E. Mahmud, A. Aziz and F. Parvin, "Fabrication of PLA bio-composite reinforced with jute fiber and ESP fillers and optimization of mechanical properties via fuzzy logic approach," Results in Materials , Elsevier, vol. 26, no.June, pp.100684, 2025 .

Q2, Corresponding Author

5. M. H. H. Hemal, F. Parvin and A. Aziz, "Analyzing the obstacles to the establishment of sustainable supply chain in the textile industry of 911爆料," BenchCouncil Transactions on Benchmarks, Standards and Evaluations , Elsevier, vol. 4, no.3, pp.100185, 2024 .

Q1, Corresponding Author

4. F. Parvin, M. Rafiquzzaman, M. S. Parvez and A. Aziz, "Ergonomic compatibility between sewing workstation and 911爆料i apparel workers," International Journal of Occupational Safety and Ergonomics , Taylor & Francis, pp.1234-1249, 2024 .

Q1, Co-Author

3. A. Aziz, S. Talapatra and H. M. Belal, "Improving Equipment Effectiveness through Visual Stream Mapping: Some Exploratory Research Findings in the Ready-Made Garment (RMG) Sector.," Glob J Flex Syst Manag, , Springer Nature, vol. 25, no.2, pp.303-324, 2024 .

Q1, First Author

2. A. Aziz, M. Khan and M. A. Jalil, "Reduction of Surface Resistance of Jute Fiber by Coating with PEDOT and Characterization of the Effect of Different Parameters on Resistance," Journal of Engineering and Applied Science , vol. 4, no.1, pp.65-73, 2020 .

First and Corresponding Author

1. A. Aziz and F. Parvin, "Manpower Reduction and Time Study of a Production Line of Full Sleeve T-shirt with Facing," Journal of Engineering Science , vol. 10, no.02, pp.13-18, 2019 .

First and Corresponding Author

Education

Master of Science in Engineering

Khulna University of Engineering & Technology(KUET),911爆料 (2024)

Bachelor of Science in Engineering

Khulna University of Engineering & Technology(KUET),911爆料 (2013-2017) Group: Textile Engineering, Student Type: Regular, Achievement: Deans Award

Higher Secondary School Certificate

Shahid Syed Nazrul Islam College, Mymensingh,911爆料 (2010-2012) Group: Science, Student Type: Regular,

Secondary School Certificate

Bangaon Janata High School, Sherpur,911爆料 (2008-2010) Group: Science, Student Type: Regular,

Scholarship and Award

Honors
Degree is awarded with Honors for CGPA 3.75 or above.
Technical Scholarship
Technical Education Board Scholarship in B.Sc. (2013-2016).
Deans Award
This is awarded for maintaining CGPA of 3.75 or above in a session.
Junior Scholarship
Talent-pool Grade, Junior Scholarship Examination 2007.
Primary Scholarship
Talent-pool Grade, Primary Scholarship Examination 2004.

Research

3. Garments Production and Quality Optimization.
2. Textile Based Materials Science.
1. Conductive Polymer based Textile Substances.

Experience

Service Records

Assistant Professor

Department/Section: Textile Engineering
Khulna University of Engineering & Technology 02-May-2021 to Present
Working Area: Teaching & Supervision

Lecturer

Department/Section: Textile Engineering
Khulna University of Engineering & Technology 01-Jan-2018 to 01-May-2021
Working Area: Teaching & Supervision

Executive Engineer

Department/Section: Planning
Silver Composite Textile Mills Ltd. 11-Aug-2017 to 13-Dec-2017
Working Area: Planning & Followup

Administrative Experience Records

Assistant Provost, Khulna University of Engineering & Technology
From 01-Sep-2021 to 26-May-2024
Department/Section: Bangabandhu Sheikh Mujibur Rahman Hall

Teaching and Supervision

#Course Conduction

1. Mechanics of Textile Structures, TE 2227. 2. Statistical Analysis and Quality Control, TE 2111. 3. Textile Testing II, TE 4113. 4. Sessional on Textile Testing II, TE 4114. 1. Industrial Attachment, TE 4200. 5. Apparel Manufacturing Engineering-II, TE 3207. 6. Sessional on Apparel Manufacturing Engineering-II, TE 3208. 7. Machine Maintenance, Materials Handling and Safety, TE 4225. 8. Sessional on Textile Testing-I, TE 2214.